NDT Basic Level III Questions with complete solution
2025/2026
1. C For individuals with only a high school education, the number of
training hours recommended by SNT-TC-1A:
(Answer with A, B, C, or D)
a. Should be increased by 25% over the requirements for those
with a 4 year technical degree
b. May not be altered from those published
c. May be adjusted to reflect the candidates actual education level
d. Is not applicable to those with education levels of less than a
high school equivalent
2. D A company's written practice, according to SNT-TC-1A, should include
the: (Answer with A, B, C, or D)
a. Background and title of the designated certifying agent of the employer
b. Specific codes, standards, specifications, and procedures to be
used with the practice in question
c. Procedures that are used in evaluating materials and components
in accordance with specific codes, standards, and specifications
d. Responsibility of each level of certification for determining the
acceptability of materials and components
3. C A Level III certified to SNT-TC-1A, should have a general familiarity
with: (Answer with A, B, C, or D)
a. All methods listed in SNT-TC-1A
b. Fracture mechanics
c. Other appropriate NDT methods
d. NDT methods required in ISO 9712
4. B Which of the following is recommended by SNT-TC-1A for Level III
certification? (Answer with A, B, C, or D)
a. Two years experience in NDT comparable to that of a NDT Level II if a
high school graduate in each method they are certifying to
b. Graduated from a four year engineering or science curriculum from a
college
, NDT Basic Level III
Study online at https://quizlet.com/_d35bv3
or university plus one year experience in NDT comparable to that of a
NDT Level II
c. Graduated from a two year vocational or junior college with the
required number of training hours listed for both NDT Level I and
NDT Level II and NDT experience comparable to that of a NDT Level
II
d. Five years experience in NDT if the candidate did not graduate from
high school
5. Yes If a certification program is to meet the minimum recommendations of
SNT-TC-1A, do the following NDT Level II examination scores meet the
minimum recommen- dations: General-72%, Specific-78%, and
Practical-90%?
a. Yes
b. No. The minimum passing grade for an examination is 80%
c. No. The general exam score is less than 75%
d. No. The composite score is less than 80%
6. C The responsibility for compliance with SNT-TC-1A lies with
(the): (Answer with A, B, C, or D)
a. ASNT Certification Board
b. State licenses and inspections department
c. Indeterminate entity, as this is not addressed in SNT-TC-1A
d. Company requiring the certification
7. D Which statement is true regarding SNT-TC-1A trainees? They
should: (Answer with A, B, C, or D)
a. Not perform tests on production material
b. Have potential for NDT Level II certification
c. Report test results to an NDT Level II
d. Work with a certified individual
8. A SNT-TC-1A recommends that vision tests for near distance visual
acuity for NDT Level I and NDT Level II personnel should be conducted
, upon initial certification (and):
(Answer with A, B, C, or D)
, NDT Basic Level III
Study online at https://quizlet.com/_d35bv3
At 1 year intervals thereafter
With no subsequent tests
At 3 year intervals thereafter
When changes occur in visual acuity
9. Is terminated Companies issuing SNT-TC-1A certificates should revoke any NDT
certification
when the employee:
a. Does field work at a temporary job site
b. Is terminated
c. Takes more than one month leave of absence
d. Does not perform in the NDT method, where certified, for six
continuous weeks
10. 5 years The recommended maximum recertification interval for SNT-TC-1A for a
Level III is:
a. 3 years
b. 4 years
c. 5 years
d. 6 years
11. A If an employer choose to increase the number of questions required for
a specific examination over the recommended number in SNT-TC-1A,
which of the following meets the recommendations of SNT-TC-1A?
(Answer with A, B, C, or D)
a. The employer's written practice should state the number of
questions that are required
b. SNT-TC-1A will not allow a modification regarding the quantity of
questions
c. The employer is free to modify the number of questions only in
the General examination and must maintain the exact number of
questions in the Specific examination
d. Only an ASNT approved written practice shall be acceptable when
2025/2026
1. C For individuals with only a high school education, the number of
training hours recommended by SNT-TC-1A:
(Answer with A, B, C, or D)
a. Should be increased by 25% over the requirements for those
with a 4 year technical degree
b. May not be altered from those published
c. May be adjusted to reflect the candidates actual education level
d. Is not applicable to those with education levels of less than a
high school equivalent
2. D A company's written practice, according to SNT-TC-1A, should include
the: (Answer with A, B, C, or D)
a. Background and title of the designated certifying agent of the employer
b. Specific codes, standards, specifications, and procedures to be
used with the practice in question
c. Procedures that are used in evaluating materials and components
in accordance with specific codes, standards, and specifications
d. Responsibility of each level of certification for determining the
acceptability of materials and components
3. C A Level III certified to SNT-TC-1A, should have a general familiarity
with: (Answer with A, B, C, or D)
a. All methods listed in SNT-TC-1A
b. Fracture mechanics
c. Other appropriate NDT methods
d. NDT methods required in ISO 9712
4. B Which of the following is recommended by SNT-TC-1A for Level III
certification? (Answer with A, B, C, or D)
a. Two years experience in NDT comparable to that of a NDT Level II if a
high school graduate in each method they are certifying to
b. Graduated from a four year engineering or science curriculum from a
college
, NDT Basic Level III
Study online at https://quizlet.com/_d35bv3
or university plus one year experience in NDT comparable to that of a
NDT Level II
c. Graduated from a two year vocational or junior college with the
required number of training hours listed for both NDT Level I and
NDT Level II and NDT experience comparable to that of a NDT Level
II
d. Five years experience in NDT if the candidate did not graduate from
high school
5. Yes If a certification program is to meet the minimum recommendations of
SNT-TC-1A, do the following NDT Level II examination scores meet the
minimum recommen- dations: General-72%, Specific-78%, and
Practical-90%?
a. Yes
b. No. The minimum passing grade for an examination is 80%
c. No. The general exam score is less than 75%
d. No. The composite score is less than 80%
6. C The responsibility for compliance with SNT-TC-1A lies with
(the): (Answer with A, B, C, or D)
a. ASNT Certification Board
b. State licenses and inspections department
c. Indeterminate entity, as this is not addressed in SNT-TC-1A
d. Company requiring the certification
7. D Which statement is true regarding SNT-TC-1A trainees? They
should: (Answer with A, B, C, or D)
a. Not perform tests on production material
b. Have potential for NDT Level II certification
c. Report test results to an NDT Level II
d. Work with a certified individual
8. A SNT-TC-1A recommends that vision tests for near distance visual
acuity for NDT Level I and NDT Level II personnel should be conducted
, upon initial certification (and):
(Answer with A, B, C, or D)
, NDT Basic Level III
Study online at https://quizlet.com/_d35bv3
At 1 year intervals thereafter
With no subsequent tests
At 3 year intervals thereafter
When changes occur in visual acuity
9. Is terminated Companies issuing SNT-TC-1A certificates should revoke any NDT
certification
when the employee:
a. Does field work at a temporary job site
b. Is terminated
c. Takes more than one month leave of absence
d. Does not perform in the NDT method, where certified, for six
continuous weeks
10. 5 years The recommended maximum recertification interval for SNT-TC-1A for a
Level III is:
a. 3 years
b. 4 years
c. 5 years
d. 6 years
11. A If an employer choose to increase the number of questions required for
a specific examination over the recommended number in SNT-TC-1A,
which of the following meets the recommendations of SNT-TC-1A?
(Answer with A, B, C, or D)
a. The employer's written practice should state the number of
questions that are required
b. SNT-TC-1A will not allow a modification regarding the quantity of
questions
c. The employer is free to modify the number of questions only in
the General examination and must maintain the exact number of
questions in the Specific examination
d. Only an ASNT approved written practice shall be acceptable when
