Arizona Broadband Technician
Certification Exam Practice Questions
And Correct Answers (Verified Answers)
Plus Rationale 2026 Q&A| Instant
Download Pdf
1. What is the primary purpose of a broadband technician in Arizona?
A. To design consumer electronic devices
B. To install, maintain, and troubleshoot broadband internet
infrastructure
C. To regulate internet service pricing
D. To write software for network routers
Broadband technicians are responsible for the deployment and
upkeep of broadband network infrastructure rather than designing
consumer devices or regulating pricing.
2. Which frequency band is commonly used for fixed wireless
broadband in rural areas?
A. 900 MHz
B. 2.4 GHz
C. 5 GHz
D. 60 GHz
The 5 GHz band is widely used for fixed wireless broadband due to its
balance of throughput and range.
,3. What does FTTP stand for in broadband terminology?
A. Fast Track Telecommunications Protocol
B. Fiber To The Premises
C. Frequency Tuned Transmission Path
D. Fiber Transport Testing Procedure
FTTP refers to delivering fiber optic connection directly to the
customer’s residence or business.
4. Which tool is used to measure signal strength on a coaxial cable?
A. Multimeter
B. Spectrum analyzer
C. Return loss meter
D. Tone generator
Return loss meters measure how much signal is reflected back,
indicating cable integrity and signal strength.
5. What kind of connector is standard for F-type coaxial cable
connections?
A. RJ-45
B. F-connector
C. BNC
D. SC
F-connectors are standard for coaxial cable in broadband
installations.
6. In fiber optics, what does "attenuation" refer to?
A. Increase in signal power
B. Loss of signal strength over distance
C. Reflection at connectors
D. Amplification by repeaters
Attenuation describes signal power loss as light travels through fiber.
, 7. Which safety precaution is most important when working around
fiber optic cables?
A. Wearing rubber gloves
B. Using insulated tools
C. Avoiding eye exposure to fiber ends and laser light
D. Ear protection
Fiber optic ends and active lasers can cause eye damage if proper
precautions are not taken.
8. What is the purpose of a splitter in a PON (Passive Optical Network)?
A. To boost signal strength
B. To divide optical signal to multiple endpoints
C. To convert optical to electrical signal
D. To provide power to ONT devices
PON splitters divide one optical signal among multiple subscribers
without power.
9. What type of cable is typically used for backbone broadband
connections?
A. Cat 3
B. Fiber optic
C. Coax RG-59
D. Twisted pair telephone wire
Fiber optic cables are favored for backbone connections due to high
capacity and low loss.
10. Which protocol is used for assigning IP addresses
automatically?
A. FTP
B. DHCP
C. DNS
Certification Exam Practice Questions
And Correct Answers (Verified Answers)
Plus Rationale 2026 Q&A| Instant
Download Pdf
1. What is the primary purpose of a broadband technician in Arizona?
A. To design consumer electronic devices
B. To install, maintain, and troubleshoot broadband internet
infrastructure
C. To regulate internet service pricing
D. To write software for network routers
Broadband technicians are responsible for the deployment and
upkeep of broadband network infrastructure rather than designing
consumer devices or regulating pricing.
2. Which frequency band is commonly used for fixed wireless
broadband in rural areas?
A. 900 MHz
B. 2.4 GHz
C. 5 GHz
D. 60 GHz
The 5 GHz band is widely used for fixed wireless broadband due to its
balance of throughput and range.
,3. What does FTTP stand for in broadband terminology?
A. Fast Track Telecommunications Protocol
B. Fiber To The Premises
C. Frequency Tuned Transmission Path
D. Fiber Transport Testing Procedure
FTTP refers to delivering fiber optic connection directly to the
customer’s residence or business.
4. Which tool is used to measure signal strength on a coaxial cable?
A. Multimeter
B. Spectrum analyzer
C. Return loss meter
D. Tone generator
Return loss meters measure how much signal is reflected back,
indicating cable integrity and signal strength.
5. What kind of connector is standard for F-type coaxial cable
connections?
A. RJ-45
B. F-connector
C. BNC
D. SC
F-connectors are standard for coaxial cable in broadband
installations.
6. In fiber optics, what does "attenuation" refer to?
A. Increase in signal power
B. Loss of signal strength over distance
C. Reflection at connectors
D. Amplification by repeaters
Attenuation describes signal power loss as light travels through fiber.
, 7. Which safety precaution is most important when working around
fiber optic cables?
A. Wearing rubber gloves
B. Using insulated tools
C. Avoiding eye exposure to fiber ends and laser light
D. Ear protection
Fiber optic ends and active lasers can cause eye damage if proper
precautions are not taken.
8. What is the purpose of a splitter in a PON (Passive Optical Network)?
A. To boost signal strength
B. To divide optical signal to multiple endpoints
C. To convert optical to electrical signal
D. To provide power to ONT devices
PON splitters divide one optical signal among multiple subscribers
without power.
9. What type of cable is typically used for backbone broadband
connections?
A. Cat 3
B. Fiber optic
C. Coax RG-59
D. Twisted pair telephone wire
Fiber optic cables are favored for backbone connections due to high
capacity and low loss.
10. Which protocol is used for assigning IP addresses
automatically?
A. FTP
B. DHCP
C. DNS
