US Army Explosive Safety Familiarization QUESTIONS WITH CORRECT DETAILED ANSWERS || GUARANTEED PAS

US Army Explosive Safety Familiarization QUESTIONS WITH CORRECT DETAILED ANSWERS || GUARANTEED PASS 1. Which is NOT a common mistake when submitting an ESSP? - ANSWER Sending the ESSP to USATCES 2. Your facility does not have a lightening protection system (LPS). Which of these will you have to submit? - ANSWER Risk Assessment and command acceptance of the risk 3. Who is authorized to sign an ESSP transmittal memorandum? - ANSWER Installation Commander or designated representative 4. Which ESSP category addresses PES and ES that do not meet the deterministic QD criteria, but do meet DDESB-approved, risk-based siting acceptance criteria? - ANSWER RBSB 5. Your installation is refurbishing an existing PES facility built in 1968. Do you need to complete an ESSP? - ANSWER Yes, and it requires DDESB approval. 6. Intraline distance (ILD) is the minimum distance permitted between... - ANSWER two operating buildings. 7. The purpose of an ESSP is to ensure safety, provide specifications, and... - ANSWER establish limits. 8. You must submit an ESSP for DDESB approval if the installation is... - ANSWER building an ES within an existing ESQD arc. 9. Failing to submit a successful ESSP may result in... - ANSWER reduced operational capacity. 10. Which are the phases of the ESSP process in order? - ANSWER Development and Evaluation, Submission, DDESB Review, and Implementation. 11. The Expedited Approval Request must... - ANSWER explain why an expedited approval is required. 12. Which part of the ESSP package contains background information, site location, and the reason for the ESSP submission? - ANSWER ESSP narrative 13. Which ESSP category addresses facilities and operations that do not completely conform to deterministic QD criteria or meet the risk-based criteria in DESR 6055.09 Edition 1? - ANSWER HSP 14. As distance from the potential explosion site decreases, the potential for damage to an exposed site from an explosion.... - ANSWER increases. 15. Your installation is increasing the NEW for a storage site built in 1969 and storing a hazard division that was not previously approved for that location. Do you need to complete an ESSP? - ANSWER Yes, and it requires DDESB approval.