NCCER Module 9 (material Handling)
1. before attempting to lift any materials?: make sure the load does not have
perusing nails wires or sharp edges
2. before attempting to lower an overhead load?: size up the load
3. what is the proper procedure to lift objects: bend knees and get a good grip,
lift with legs keep back straight and head up
4. when stacking bags of material that are the same width, step back
and cross key the bags?: every 10 bags high.
5. never stack or store materials?: on scaffolds or runways
6. the know shown in the figure above is a?: clove hitch
7. one common way to tie a clove hitch is to use two?: Half hitches in
opposite directions
8. when moving a material cart on an incline or decline surface, be sure
the?: load does not exceed the labeled weight capacity
9. to transport a bottle of compressed gas, use a: Cylinder cart
10. what device may have a rotating surface and/ or spikes on
the table surface for a better grip?: roller skids
11. to work with motorized material handling equipment, a worker
must be?: -
trained, certified and authorized
12. how is the fall zone for a forklift operation best defined?: any area
into which the lifted materials could potentially fall
13. to prevent tip overs when driving a rough terrain forklift, keep
the load?: carry the load low
14. when using hand signals always?: maintain eye contact with the operator
15. the forklift hand signal for dog everything mean: to pause
1/
1
1. before attempting to lift any materials?: make sure the load does not have
perusing nails wires or sharp edges
2. before attempting to lower an overhead load?: size up the load
3. what is the proper procedure to lift objects: bend knees and get a good grip,
lift with legs keep back straight and head up
4. when stacking bags of material that are the same width, step back
and cross key the bags?: every 10 bags high.
5. never stack or store materials?: on scaffolds or runways
6. the know shown in the figure above is a?: clove hitch
7. one common way to tie a clove hitch is to use two?: Half hitches in
opposite directions
8. when moving a material cart on an incline or decline surface, be sure
the?: load does not exceed the labeled weight capacity
9. to transport a bottle of compressed gas, use a: Cylinder cart
10. what device may have a rotating surface and/ or spikes on
the table surface for a better grip?: roller skids
11. to work with motorized material handling equipment, a worker
must be?: -
trained, certified and authorized
12. how is the fall zone for a forklift operation best defined?: any area
into which the lifted materials could potentially fall
13. to prevent tip overs when driving a rough terrain forklift, keep
the load?: carry the load low
14. when using hand signals always?: maintain eye contact with the operator
15. the forklift hand signal for dog everything mean: to pause
1/
1
