CLEET PHASE 3 2026 COMPREHENSIVE STUDY
GUIDE SOLVED QUESTION SET
◉ The student will identify what must first be accomplished whenever a
person picks up a firearm.. Answer: ENSURE THAT IT IS
UNLOADED NEVER LAY A FIREARM DOWN WITHOUT FIRST
UNLOADING IT.
◉ The student will identify when a firearm, which is being brought to
the range, must be unloaded.. Answer: ALL FIREARMS BROUGHT
TO THE RANGE MUST BE UNLOADED
◉ The student will identify when a firearm, which is intended for use on
the range, must be checked and approved.. Answer: ALL FIREARMS
MUST BE CHECKED BY A QUALIFIED POLICE ARMORER &
APPROVED BY THE RANGE MASTER PRIOR TO USE ON THE
RANGE
◉ The student will identify when firearms may be loaded on the range..
Answer: FIREARMS WILL BE LOADED ON THE RANGE ONLY
AFTER POSITION HAS BEEN TAKEN ON THE FIRING LINE, AND
ONLY AFTER THE COMMAND TO LOAD HAS BEEN GIVEN
FROM THE TOWER.
, ◉ The student will identify where spent brass is to be ejected. Answer:
EJECT SPENT BRASS ONTO THE GROUND, NOT INTO YOUR
HAND OR A CONTAINER
◉ The student will identify where a firearm may be un-holstered.
Answer: NO FIREARM WILL BE TAKEN OUT OF THE HOLSTER
OTHER THAN WHEN ON THE FIRING LINE, OR IN A
DESIGNATED DRYFIRE AREA
◉ The student will identify what must be checked free of obstructions
prior to loading and firing a firearm.. Answer: ALL FIREARMS WILL
BE CHECKED FOR CHAMBER AND BARREL OBSTRUCTIONS
BEFORE LOADING AND FIRING
◉ The student will identify when the trigger finger may be placed on the
trigger when the weapon is being presented. Answer: NEVER PLACE
YOUR FINGER ON THE TRIGGER UNTIL THE FIREARM IS
CLEAR OF THE HOLSTER & SAFELY POINTED DOWN RANGE.
◉ The student will identify the procedure to follow when experiencing a
squib load. Answer: IN THE EVENT OF A SQUIB LOAD, KEEP THE
FIREARM POINTED DOWN RANGE, AND CALL FOR A LINE
OFFICER. NEVER FIRE A SUCCEEDING ROUND FOLLOWING A
SQUIB LOAD UNTIL THE BARREL HAS BEEN CHECKED FOR
OBSTRUCTIONS!
GUIDE SOLVED QUESTION SET
◉ The student will identify what must first be accomplished whenever a
person picks up a firearm.. Answer: ENSURE THAT IT IS
UNLOADED NEVER LAY A FIREARM DOWN WITHOUT FIRST
UNLOADING IT.
◉ The student will identify when a firearm, which is being brought to
the range, must be unloaded.. Answer: ALL FIREARMS BROUGHT
TO THE RANGE MUST BE UNLOADED
◉ The student will identify when a firearm, which is intended for use on
the range, must be checked and approved.. Answer: ALL FIREARMS
MUST BE CHECKED BY A QUALIFIED POLICE ARMORER &
APPROVED BY THE RANGE MASTER PRIOR TO USE ON THE
RANGE
◉ The student will identify when firearms may be loaded on the range..
Answer: FIREARMS WILL BE LOADED ON THE RANGE ONLY
AFTER POSITION HAS BEEN TAKEN ON THE FIRING LINE, AND
ONLY AFTER THE COMMAND TO LOAD HAS BEEN GIVEN
FROM THE TOWER.
, ◉ The student will identify where spent brass is to be ejected. Answer:
EJECT SPENT BRASS ONTO THE GROUND, NOT INTO YOUR
HAND OR A CONTAINER
◉ The student will identify where a firearm may be un-holstered.
Answer: NO FIREARM WILL BE TAKEN OUT OF THE HOLSTER
OTHER THAN WHEN ON THE FIRING LINE, OR IN A
DESIGNATED DRYFIRE AREA
◉ The student will identify what must be checked free of obstructions
prior to loading and firing a firearm.. Answer: ALL FIREARMS WILL
BE CHECKED FOR CHAMBER AND BARREL OBSTRUCTIONS
BEFORE LOADING AND FIRING
◉ The student will identify when the trigger finger may be placed on the
trigger when the weapon is being presented. Answer: NEVER PLACE
YOUR FINGER ON THE TRIGGER UNTIL THE FIREARM IS
CLEAR OF THE HOLSTER & SAFELY POINTED DOWN RANGE.
◉ The student will identify the procedure to follow when experiencing a
squib load. Answer: IN THE EVENT OF A SQUIB LOAD, KEEP THE
FIREARM POINTED DOWN RANGE, AND CALL FOR A LINE
OFFICER. NEVER FIRE A SUCCEEDING ROUND FOLLOWING A
SQUIB LOAD UNTIL THE BARREL HAS BEEN CHECKED FOR
OBSTRUCTIONS!
