Nevada Construction Safety Manager
Certification Examination Exam Practice
Questions And Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1. A construction safety manager’s primary responsibility on a job site is
to ensure compliance with which of the following?
A. Marketing standards for contractors
B. Occupational safety regulations and hazard control procedures
C. Employee payroll and financial records
D. Material purchasing schedules
The primary role of a construction safety manager is to ensure the
workplace complies with safety regulations such as OSHA standards, while
implementing hazard prevention and control measures to protect workers
and reduce accidents.
2. Which federal agency primarily regulates construction safety standards
in the United States?
A. Environmental Protection Agency (EPA)
B. Department of Labor Statistics (BLS)
C. Occupational Safety and Health Administration (OSHA)
D. National Transportation Safety Board (NTSB)
OSHA is the federal agency responsible for establishing and enforcing
workplace safety standards, including those specifically governing
construction activities.
3. In construction safety terminology, the term “competent person”
refers to an individual who:
, A. Is licensed by the state contractor board
B. Has ten years of construction experience
C. Can identify hazards and has authority to correct them
immediately
D. Works as a safety consultant
A competent person is defined by OSHA as someone capable of identifying
hazards and authorized to take prompt corrective measures to eliminate
them.
4. What is the primary purpose of a Job Hazard Analysis (JHA)?
A. Determining construction project costs
B. Scheduling construction tasks
C. Identifying potential hazards associated with specific tasks
D. Training new employees
A JHA evaluates each step of a task to identify hazards and determine safe
procedures before the work begins.
5. Fall protection is generally required in construction when workers are
exposed to heights of:
A. 4 feet or more
B. 6 feet or more
C. 8 feet or more
D. 10 feet or more
OSHA requires fall protection in construction when employees work at
heights of 6 feet or greater to prevent serious injuries and fatalities.
6. Which of the following is considered a leading indicator of
construction safety performance?
A. Total accident rate
B. Lost workdays
C. Insurance claims
D. Safety training participation rates
, Leading indicators are proactive safety metrics such as training completion,
inspections, and hazard reporting that help predict and prevent accidents.
7. The OSHA “Fatal Four” hazards in construction include falls,
electrocutions, struck-by incidents, and:
A. Fires
B. Caught-in/between incidents
C. Equipment rollovers
D. Chemical exposure
The “Fatal Four” are the four most common causes of construction
fatalities, including caught-in/between incidents involving machinery or
collapsing materials.
8. Personal Protective Equipment (PPE) should be used when:
A. Workers prefer it
B. Engineering and administrative controls cannot fully eliminate
hazards
C. Equipment is unavailable
D. The employer decides it is optional
PPE is considered the last line of defense after engineering and
administrative controls are applied to reduce hazards.
9. The purpose of a Safety Data Sheet (SDS) is to:
A. Document payroll for workers
B. Provide detailed information about hazardous chemicals
C. Track construction materials inventory
D. Record accident investigations
SDS documents provide critical safety information about chemicals,
including hazards, safe handling procedures, and emergency response
instructions.
10. A lockout/tagout procedure is primarily used to prevent:
A. Falls from elevated surfaces
B. Equipment theft
Certification Examination Exam Practice
Questions And Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1. A construction safety manager’s primary responsibility on a job site is
to ensure compliance with which of the following?
A. Marketing standards for contractors
B. Occupational safety regulations and hazard control procedures
C. Employee payroll and financial records
D. Material purchasing schedules
The primary role of a construction safety manager is to ensure the
workplace complies with safety regulations such as OSHA standards, while
implementing hazard prevention and control measures to protect workers
and reduce accidents.
2. Which federal agency primarily regulates construction safety standards
in the United States?
A. Environmental Protection Agency (EPA)
B. Department of Labor Statistics (BLS)
C. Occupational Safety and Health Administration (OSHA)
D. National Transportation Safety Board (NTSB)
OSHA is the federal agency responsible for establishing and enforcing
workplace safety standards, including those specifically governing
construction activities.
3. In construction safety terminology, the term “competent person”
refers to an individual who:
, A. Is licensed by the state contractor board
B. Has ten years of construction experience
C. Can identify hazards and has authority to correct them
immediately
D. Works as a safety consultant
A competent person is defined by OSHA as someone capable of identifying
hazards and authorized to take prompt corrective measures to eliminate
them.
4. What is the primary purpose of a Job Hazard Analysis (JHA)?
A. Determining construction project costs
B. Scheduling construction tasks
C. Identifying potential hazards associated with specific tasks
D. Training new employees
A JHA evaluates each step of a task to identify hazards and determine safe
procedures before the work begins.
5. Fall protection is generally required in construction when workers are
exposed to heights of:
A. 4 feet or more
B. 6 feet or more
C. 8 feet or more
D. 10 feet or more
OSHA requires fall protection in construction when employees work at
heights of 6 feet or greater to prevent serious injuries and fatalities.
6. Which of the following is considered a leading indicator of
construction safety performance?
A. Total accident rate
B. Lost workdays
C. Insurance claims
D. Safety training participation rates
, Leading indicators are proactive safety metrics such as training completion,
inspections, and hazard reporting that help predict and prevent accidents.
7. The OSHA “Fatal Four” hazards in construction include falls,
electrocutions, struck-by incidents, and:
A. Fires
B. Caught-in/between incidents
C. Equipment rollovers
D. Chemical exposure
The “Fatal Four” are the four most common causes of construction
fatalities, including caught-in/between incidents involving machinery or
collapsing materials.
8. Personal Protective Equipment (PPE) should be used when:
A. Workers prefer it
B. Engineering and administrative controls cannot fully eliminate
hazards
C. Equipment is unavailable
D. The employer decides it is optional
PPE is considered the last line of defense after engineering and
administrative controls are applied to reduce hazards.
9. The purpose of a Safety Data Sheet (SDS) is to:
A. Document payroll for workers
B. Provide detailed information about hazardous chemicals
C. Track construction materials inventory
D. Record accident investigations
SDS documents provide critical safety information about chemicals,
including hazards, safe handling procedures, and emergency response
instructions.
10. A lockout/tagout procedure is primarily used to prevent:
A. Falls from elevated surfaces
B. Equipment theft
