2026
OSHA (Occupational Safety and Health Administration) - Answers In the united states, enforcement
of safety work rules resides with
Act - Answers A worker neglecting to wear cut resistant chaps while operating a chainsaw is
committing an unsafe...
Working condition - Answers An employer failing to provide proper PPE creates an unsafe...
ANSI Z133 - Answers For arborcultural operations, what is the standard that employers must follow
when implementing a structural safety program?
Job briefings - Answers What documents are used to formally review site conditions and job
procedures.
Stop, think, act, review - Answers What does the acronym S.T.A.R represent in arborcultural
operations?
Behavior based - Answers Herbert Heinrich instituted study on industrial accidents in the workplace
that resulted in finding what principles were the cause of the accidents?
Leading indicators - Answers Unsafe acts, close calls at the bottom of the accident prevention
pyramid are called
Lagging indicators - Answers Serious injuries or fatalities in the workplace are known as
Multiple causation theory - Answers Petersen (2001) states that a number of contributing factors and
causes that randomly interact are responsible for injuries in the workplace, and this theory is called?
High reliability organizations - Answers These organizations where the cost of failure is high are
called?
Kinetic energy - Answers The energy of motion shown by the equation KE = (weight / 2) speed *(2)
Electrical shock - Answers The result of the passage of current through the human body
Electrocution - Answers death from direct contact with electricity
minimum approach distance - Answers closest distance that a tree worker, tool, equipment, or tree
part is permitted near overhead electrical conductors and equipment. Distance increases with
increasing voltage and varies with training of personnel.
10 feet - Answers How close can an untrained arborist get to an energized conductor under 50Kv?
direct contact - Answers This occurs when someone touches an energized fixture or conductor
Indirect Contact - Answers This occurs when someone touched an energized fixture or conductor
with a conductive object
Touch Potential - Answers The difference in voltage between two objects someone simultaneously
contacts.
Step potential - Answers The difference in voltage on the ground between two body parts near where
electricity goes to ground.
Back flow - Answers Electrical flow in an unintended direction
2' 10" - Answers What is the minimum approach distance for non-qualified line clearance personnel
on 7.2Kv?
1832* F or 1000*C - Answers Surface temperatures at the point of contact with high voltage can
reach?
Indirect contact threats - Answers An energized human body, tree or climbing rope are all example of
what?
bad luck - Answers The term accident is in disfavor because it implies that outcomes are due to what?