South Carolina Industrial Safety Auditor
Certification License Exam Practice
Questions And Correct Answers
(Verified Answers) Plus Rationale 2026
Q&A| Instant Download Pdf
1. Which federal standard establishes the minimum requirements for
occupational safety and health in general industry?
A. NFPA 70E
B. OSHA 29 CFR 1910
C. ANSI Z10
D. ISO 45001
OSHA 29 CFR 1910 sets the baseline federal regulatory requirements
for general industry safety in the United States.
2. What is the primary purpose of a Job Hazard Analysis (JHA)?
A. To document training completion
B. To identify hazards associated with specific job tasks
C. To certify equipment
D. To schedule safety meetings
A JHA systematically identifies hazards in job tasks to determine
protective measures and reduce risk.
3. In South Carolina, who is responsible for reporting a workplace fatality
to OSHA?
, A. The employee
B. The insurance provider
C. The employer
D. The safety auditor
Employers are legally required to report workplace fatalities to OSHA
within specified timeframes.
4. Which type of hazard is characterized by exposure to noise, vibration,
or temperature extremes?
A. Biological
B. Chemical
C. Physical
D. Ergonomic
Physical hazards include environmental factors such as noise and
temperature that can harm the body.
5. The hierarchy of hazard controls prioritizes which method as most
effective?
A. Administrative controls
B. Personal protective equipment
C. Elimination of the hazard
D. Training
Elimination removes the hazard entirely, making it the most effective
control in the hierarchy.
6. What is the required minimum clearance for a 480V electrical panel
workspace?
A. 18 inches
B. 3 feet
C. 5 feet
D. 6 feet
, OSHA standards require a minimum of 3 feet of clearance in front of
electrical panels for safe access.
7. Which document outlines the hazardous chemicals present at a
worksite and their associated risks?
A. Safety Data Sheet (SDS)
B. Job Safety Analysis
C. Training record
D. Hazard Communication Program
A Hazard Communication Program includes listings of hazardous
chemicals and ensures accessibility of SDSs.
8. What does the term “lockout/tagout” refer to?
A. Fire prevention system
B. Control of hazardous energy during maintenance
C. PPE requirements
D. Emergency evacuation procedure
Lockout/tagout refers to procedures that isolate energy sources to
prevent accidental startup during servicing.
9. Which South Carolina regulatory body enforces workplace safety
standards?
A. EPA
B. SC OSHA
C. DOT
D. NFPA
South Carolina OSHA enforces state occupational safety and health
standards for workplaces in the state.
10. What is the minimum frequency for conducting forklift operator
evaluations?
A. Annually
B. Biannually
Certification License Exam Practice
Questions And Correct Answers
(Verified Answers) Plus Rationale 2026
Q&A| Instant Download Pdf
1. Which federal standard establishes the minimum requirements for
occupational safety and health in general industry?
A. NFPA 70E
B. OSHA 29 CFR 1910
C. ANSI Z10
D. ISO 45001
OSHA 29 CFR 1910 sets the baseline federal regulatory requirements
for general industry safety in the United States.
2. What is the primary purpose of a Job Hazard Analysis (JHA)?
A. To document training completion
B. To identify hazards associated with specific job tasks
C. To certify equipment
D. To schedule safety meetings
A JHA systematically identifies hazards in job tasks to determine
protective measures and reduce risk.
3. In South Carolina, who is responsible for reporting a workplace fatality
to OSHA?
, A. The employee
B. The insurance provider
C. The employer
D. The safety auditor
Employers are legally required to report workplace fatalities to OSHA
within specified timeframes.
4. Which type of hazard is characterized by exposure to noise, vibration,
or temperature extremes?
A. Biological
B. Chemical
C. Physical
D. Ergonomic
Physical hazards include environmental factors such as noise and
temperature that can harm the body.
5. The hierarchy of hazard controls prioritizes which method as most
effective?
A. Administrative controls
B. Personal protective equipment
C. Elimination of the hazard
D. Training
Elimination removes the hazard entirely, making it the most effective
control in the hierarchy.
6. What is the required minimum clearance for a 480V electrical panel
workspace?
A. 18 inches
B. 3 feet
C. 5 feet
D. 6 feet
, OSHA standards require a minimum of 3 feet of clearance in front of
electrical panels for safe access.
7. Which document outlines the hazardous chemicals present at a
worksite and their associated risks?
A. Safety Data Sheet (SDS)
B. Job Safety Analysis
C. Training record
D. Hazard Communication Program
A Hazard Communication Program includes listings of hazardous
chemicals and ensures accessibility of SDSs.
8. What does the term “lockout/tagout” refer to?
A. Fire prevention system
B. Control of hazardous energy during maintenance
C. PPE requirements
D. Emergency evacuation procedure
Lockout/tagout refers to procedures that isolate energy sources to
prevent accidental startup during servicing.
9. Which South Carolina regulatory body enforces workplace safety
standards?
A. EPA
B. SC OSHA
C. DOT
D. NFPA
South Carolina OSHA enforces state occupational safety and health
standards for workplaces in the state.
10. What is the minimum frequency for conducting forklift operator
evaluations?
A. Annually
B. Biannually
