TEXAS FIRE ALARM TEST EXAM QUESTIONS
WITH 100% CORRECT ANSWERS .
A licensee must carry a pocket license for identification while engaged in the activities of the
business. - Correct Answer -True
According to NFPA, how often should homeowners replace smoke alarms in 1-2 family dwellings? -
Correct Answer -10 years
All fire warning equipment shall be mounted so as to be supported independently of its attachment
to_______. - Correct Answer -The Wires
As a licensed Residential Fire Alarm Technician, you may conduct any of the following tasks except
which? - Correct Answer -Plan
Cable used in the fire alarm circuits to ensure continued operation of critical circuits during a
specified time under fire condition is called ______ cable. - Correct Answer -Circuit integrity
Equipment shall be installed in locations where conditions do not exceed the voltage, temperature,
and _______ limits specific in the manufacturer's published instructions. - Correct Answer -Humidity
Fire detection system wiring should be permanent and without a disconnecting switch other than
those required for _______ protection. - Correct Answer -Overcurrent
Heat detectors shall have a listed spacing of not less than _____ feet. - Correct Answer -50
Heat detectors that have a white color code have a temperature rating of what? - Correct Answer -
175-249 degrees Fahrenheit (Intermediate)
Household fire alarm systems shall be programmed by the manufacturer to generate at least a
monthly test of the communication or transmission means. - Correct Answer -False
1
WITH 100% CORRECT ANSWERS .
A licensee must carry a pocket license for identification while engaged in the activities of the
business. - Correct Answer -True
According to NFPA, how often should homeowners replace smoke alarms in 1-2 family dwellings? -
Correct Answer -10 years
All fire warning equipment shall be mounted so as to be supported independently of its attachment
to_______. - Correct Answer -The Wires
As a licensed Residential Fire Alarm Technician, you may conduct any of the following tasks except
which? - Correct Answer -Plan
Cable used in the fire alarm circuits to ensure continued operation of critical circuits during a
specified time under fire condition is called ______ cable. - Correct Answer -Circuit integrity
Equipment shall be installed in locations where conditions do not exceed the voltage, temperature,
and _______ limits specific in the manufacturer's published instructions. - Correct Answer -Humidity
Fire detection system wiring should be permanent and without a disconnecting switch other than
those required for _______ protection. - Correct Answer -Overcurrent
Heat detectors shall have a listed spacing of not less than _____ feet. - Correct Answer -50
Heat detectors that have a white color code have a temperature rating of what? - Correct Answer -
175-249 degrees Fahrenheit (Intermediate)
Household fire alarm systems shall be programmed by the manufacturer to generate at least a
monthly test of the communication or transmission means. - Correct Answer -False
1
