NICET ITM 1
COMPREHENSIVE
QUESTIONS (FREQUENTLY
TESTED) WITH VERIFIED
ANSWERS GRADED A+
[Document subtitle]
[DATE]
[COMPANY NAME]
[Company address]
, Contact for further consultation
1. What is the purpose of a control valve Answer: To control flow to water based fire
protection system
2. The gauge on a
quick opening device shall indicate as compared to
the gauge on the system side of a dry pipe valve Answer: The same
pressure
3. What type of tests shall be provided when a valve is returned to
service to determine that the valve is open Answer: Valve status test
4. What is a fire service main Answer: A pipe and its appurtenances on property a pipe
between a source of water and the base of the system riser
5. Name the system that utilizes a plate through which passes a
specific amount of foam concentrate at a specific pressure Answer: Orifice
plate Proportioning
6. During an inspection which of the following would be identified as
a sprinkler which shall be replaced Answer: Corrosion
7. What are the inspection requirements for hangers and seismic
braces and stalled in concealed spaces Answer: Periodic inspection is not
2/
14
COMPREHENSIVE
QUESTIONS (FREQUENTLY
TESTED) WITH VERIFIED
ANSWERS GRADED A+
[Document subtitle]
[DATE]
[COMPANY NAME]
[Company address]
, Contact for further consultation
1. What is the purpose of a control valve Answer: To control flow to water based fire
protection system
2. The gauge on a
quick opening device shall indicate as compared to
the gauge on the system side of a dry pipe valve Answer: The same
pressure
3. What type of tests shall be provided when a valve is returned to
service to determine that the valve is open Answer: Valve status test
4. What is a fire service main Answer: A pipe and its appurtenances on property a pipe
between a source of water and the base of the system riser
5. Name the system that utilizes a plate through which passes a
specific amount of foam concentrate at a specific pressure Answer: Orifice
plate Proportioning
6. During an inspection which of the following would be identified as
a sprinkler which shall be replaced Answer: Corrosion
7. What are the inspection requirements for hangers and seismic
braces and stalled in concealed spaces Answer: Periodic inspection is not
2/
14
