Michigan Occupational Health Specialist
Exam Practice Questions And Correct
Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
Pdf
1. Occupational health and safety programs primarily aim to:
A. Reduce operational costs through workforce reduction
B. Protect workers from illness and injury
C. Eliminate the need for personal protective equipment
D. Prioritize production over worker well-being
The primary goal of occupational health and safety programs is to
protect workers from illness and injury by identifying and mitigating
hazards in the workplace.
2. Which federal agency is primarily responsible for setting and enforcing
workplace safety standards?
A. Environmental Protection Agency (EPA)
B. Occupational Safety and Health Administration (OSHA)
C. National Institutes of Health (NIH)
D. Centers for Disease Control and Prevention (CDC)
OSHA is the federal agency charged with creating and enforcing
workplace safety and health regulations to protect workers.
3. The “hierarchy of controls” begins with the most effective strategy:
A. Personal protective equipment
B. Administrative controls
C. Elimination of the hazard
D. Substitution of a less hazardous process
, The hierarchy of controls prioritizes eliminating the hazard as the
most effective means of reducing risk.
4. A key component of a hazard communication program is:
A. Random health screenings
B. Administrative leave
C. Safety data sheets (SDSs)
D. Ergonomic evaluations only
Hazard communication programs hinge on providing safety data
sheets to communicate chemical hazards to employees.
5. When conducting a job hazard analysis (JHA), the first step is to:
A. Implement controls
B. Evaluate existing controls
C. Break down the job into individual tasks
D. Train employees
The first step in a job hazard analysis is to break down the job into its
constituent tasks to identify hazards.
6. An exposure assessment primarily determines:
A. Employee satisfaction
B. The need for new hires
C. The extent and magnitude of worker exposure to hazards
D. Financial cost of safety programs
Exposure assessments quantify and characterize the extent to which
workers are exposed to hazardous agents or conditions.
7. The permissible exposure limit (PEL) is defined by:
A. American National Standards Institute (ANSI)
B. OSHA regulatory standards
C. National Institute for Occupational Safety and Health (NIOSH)
recommendations
D. World Health Organization guidelines
PELs are enforceable limits on exposure to chemical hazards set by
OSHA.
8. A primary purpose of workplace surveillance is to:
A. Increase production rates
B. Replace emergency planning
C. Identify trends in injuries and illnesses
, D. Document employee complaints only
Workplace surveillance monitors injury and illness trends over time
to inform prevention strategies.
9. A confined space is characterized by all EXCEPT:
A. Limited entry and exit
B. Continuous natural ventilation
C. Potential for hazardous atmosphere
D. Not designed for continuous occupancy
Continuous natural ventilation means the space is not confined; true
confined spaces lack adequate ventilation.
10. The acronym “LOTO” stands for:
A. Leave Only Tools Out
B. Limiting Occupational Training Options
C. Lockout/Tagout
D. Lowering Operational Task Oversight
Lockout/Tagout refers to procedures controlling hazardous energy to
prevent unexpected equipment energization.
11. The primary purpose of an emergency action plan is to:
A. Track worker attendance
B. Provide a systematic response to workplace emergencies
C. Decrease insurance requirements
D. Replace fire prevention plans
Emergency action plans guide systematic responses to emergencies
like fires, spills, or natural disasters.
12. Heat stress symptoms include all EXCEPT:
A. Dizziness
B. Nausea
C. Bradycardia (low heart rate)
D. Profuse sweating
Bradycardia is not a typical symptom of heat stress; tachycardia is
more common.
13. The most effective way to prevent noise-induced hearing loss is
to:
A. Provide earplugs only
B. Monitor employee satisfaction
Exam Practice Questions And Correct
Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
1. Occupational health and safety programs primarily aim to:
A. Reduce operational costs through workforce reduction
B. Protect workers from illness and injury
C. Eliminate the need for personal protective equipment
D. Prioritize production over worker well-being
The primary goal of occupational health and safety programs is to
protect workers from illness and injury by identifying and mitigating
hazards in the workplace.
2. Which federal agency is primarily responsible for setting and enforcing
workplace safety standards?
A. Environmental Protection Agency (EPA)
B. Occupational Safety and Health Administration (OSHA)
C. National Institutes of Health (NIH)
D. Centers for Disease Control and Prevention (CDC)
OSHA is the federal agency charged with creating and enforcing
workplace safety and health regulations to protect workers.
3. The “hierarchy of controls” begins with the most effective strategy:
A. Personal protective equipment
B. Administrative controls
C. Elimination of the hazard
D. Substitution of a less hazardous process
, The hierarchy of controls prioritizes eliminating the hazard as the
most effective means of reducing risk.
4. A key component of a hazard communication program is:
A. Random health screenings
B. Administrative leave
C. Safety data sheets (SDSs)
D. Ergonomic evaluations only
Hazard communication programs hinge on providing safety data
sheets to communicate chemical hazards to employees.
5. When conducting a job hazard analysis (JHA), the first step is to:
A. Implement controls
B. Evaluate existing controls
C. Break down the job into individual tasks
D. Train employees
The first step in a job hazard analysis is to break down the job into its
constituent tasks to identify hazards.
6. An exposure assessment primarily determines:
A. Employee satisfaction
B. The need for new hires
C. The extent and magnitude of worker exposure to hazards
D. Financial cost of safety programs
Exposure assessments quantify and characterize the extent to which
workers are exposed to hazardous agents or conditions.
7. The permissible exposure limit (PEL) is defined by:
A. American National Standards Institute (ANSI)
B. OSHA regulatory standards
C. National Institute for Occupational Safety and Health (NIOSH)
recommendations
D. World Health Organization guidelines
PELs are enforceable limits on exposure to chemical hazards set by
OSHA.
8. A primary purpose of workplace surveillance is to:
A. Increase production rates
B. Replace emergency planning
C. Identify trends in injuries and illnesses
, D. Document employee complaints only
Workplace surveillance monitors injury and illness trends over time
to inform prevention strategies.
9. A confined space is characterized by all EXCEPT:
A. Limited entry and exit
B. Continuous natural ventilation
C. Potential for hazardous atmosphere
D. Not designed for continuous occupancy
Continuous natural ventilation means the space is not confined; true
confined spaces lack adequate ventilation.
10. The acronym “LOTO” stands for:
A. Leave Only Tools Out
B. Limiting Occupational Training Options
C. Lockout/Tagout
D. Lowering Operational Task Oversight
Lockout/Tagout refers to procedures controlling hazardous energy to
prevent unexpected equipment energization.
11. The primary purpose of an emergency action plan is to:
A. Track worker attendance
B. Provide a systematic response to workplace emergencies
C. Decrease insurance requirements
D. Replace fire prevention plans
Emergency action plans guide systematic responses to emergencies
like fires, spills, or natural disasters.
12. Heat stress symptoms include all EXCEPT:
A. Dizziness
B. Nausea
C. Bradycardia (low heart rate)
D. Profuse sweating
Bradycardia is not a typical symptom of heat stress; tachycardia is
more common.
13. The most effective way to prevent noise-induced hearing loss is
to:
A. Provide earplugs only
B. Monitor employee satisfaction
