Michigan Elevator Safety Specialist
Exam Practice Questions And Correct
Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
Pdf
1. Which code is the primary standard for elevator installation and
maintenance that a Michigan Elevator Safety Specialist must be
familiar with?
A. International Building Code
B. National Fire Protection Association (NFPA) 70
C. ASME A17.1/CSA B44
D. OSHA 1910 Subpart S
Bold Italic Rationale: ASME A17.1/CSA B44 is the foremost standard
governing elevator and escalator safety and is the primary reference
for both installation and inspection criteria relevant to Michigan
Elevator Safety Specialists.
2. What is the minimum frequency for periodic inspection of elevators
as required by Michigan administrative rules?
A. Monthly
B. Annually
C. Every two years
D. Every five years
Bold Italic Rationale: Annual inspections ensure ongoing compliance
with safety standards, which is the minimum requirement under
Michigan elevator safety regulations.
,3. In elevator terminology, what does “car sling” refer to?
A. Emergency brake
B. Hoistway door lock
C. The structural frame that supports the car platform
D. Counterweight assembly
Bold Italic Rationale: The car sling is the structural framework that
supports the elevator car platform and cabin components, a key term
in elevator mechanics.
4. Which device prevents an elevator from moving beyond its
designated hoistway limits?
A. Governor rope
B. Overspeed governor
C. Counterweight buffer
D. Safety switch
Bold Italic Rationale: The overspeed governor triggers safety
mechanisms to stop the elevator if it exceeds its speed limits,
preventing travel beyond hoistway limits.
5. What is the purpose of a buffer at the bottom of an elevator
hoistway?
A. To house counterweights
B. To absorb impact if the car descends too far
C. To guide the elevator car
D. To provide electrical grounding
Bold Italic Rationale: Buffers absorb energy and cushion the elevator
car in the event it travels below the lowest landing, protecting
passengers and equipment.
6. Which component balances elevator car weight and reduces motor
load?
A. Car sling
B. Counterweight
C. Governor
D. Door interlock
Bold Italic Rationale: Counterweights balance the car’s weight and
reduce the amount of work the hoisting machine must perform.
, 7. In elevator inspections, what does “no load test” evaluate?
A. Passenger load capacity
B. Brake wear under maximum load
C. Operation of elevator without passengers
D. Emergency lighting
Bold Italic Rationale: The no-load test checks the elevator’s function
and safety systems without passengers, ensuring normal operation
before load testing.
8. Which of the following must be provided if an elevator car exceeds
two levels?
A. Voice annunciator only
B. Automatic rescue device (ARD)
C. Firefighter service only
D. Speed governor only
Bold Italic Rationale: An automatic rescue device is required for
elevators serving more than two levels to safely move passengers in
event of power failure.
9. What is the main hazard that door interlocks protect against?
A. Overhead collisions
B. Cable slack
C. Car movement when doors are open
D. Excessive speed
Bold Italic Rationale: Door interlocks prevent the car from moving
unless the doors are fully closed and locked, ensuring passenger
safety.
10. Which signal must an elevator provide in a power failure?
A. Music playback
B. Emergency communication device
C. Cabin ventilation only
D. Automatic stop only
Bold Italic Rationale: Elevators must have a means for passengers to
communicate with assistance during a power failure to comply with
safety regulations.
11. What is the maximum allowable car speed for a machine-
room-less (MRL) elevator under ASME A17.1?
Exam Practice Questions And Correct
Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
1. Which code is the primary standard for elevator installation and
maintenance that a Michigan Elevator Safety Specialist must be
familiar with?
A. International Building Code
B. National Fire Protection Association (NFPA) 70
C. ASME A17.1/CSA B44
D. OSHA 1910 Subpart S
Bold Italic Rationale: ASME A17.1/CSA B44 is the foremost standard
governing elevator and escalator safety and is the primary reference
for both installation and inspection criteria relevant to Michigan
Elevator Safety Specialists.
2. What is the minimum frequency for periodic inspection of elevators
as required by Michigan administrative rules?
A. Monthly
B. Annually
C. Every two years
D. Every five years
Bold Italic Rationale: Annual inspections ensure ongoing compliance
with safety standards, which is the minimum requirement under
Michigan elevator safety regulations.
,3. In elevator terminology, what does “car sling” refer to?
A. Emergency brake
B. Hoistway door lock
C. The structural frame that supports the car platform
D. Counterweight assembly
Bold Italic Rationale: The car sling is the structural framework that
supports the elevator car platform and cabin components, a key term
in elevator mechanics.
4. Which device prevents an elevator from moving beyond its
designated hoistway limits?
A. Governor rope
B. Overspeed governor
C. Counterweight buffer
D. Safety switch
Bold Italic Rationale: The overspeed governor triggers safety
mechanisms to stop the elevator if it exceeds its speed limits,
preventing travel beyond hoistway limits.
5. What is the purpose of a buffer at the bottom of an elevator
hoistway?
A. To house counterweights
B. To absorb impact if the car descends too far
C. To guide the elevator car
D. To provide electrical grounding
Bold Italic Rationale: Buffers absorb energy and cushion the elevator
car in the event it travels below the lowest landing, protecting
passengers and equipment.
6. Which component balances elevator car weight and reduces motor
load?
A. Car sling
B. Counterweight
C. Governor
D. Door interlock
Bold Italic Rationale: Counterweights balance the car’s weight and
reduce the amount of work the hoisting machine must perform.
, 7. In elevator inspections, what does “no load test” evaluate?
A. Passenger load capacity
B. Brake wear under maximum load
C. Operation of elevator without passengers
D. Emergency lighting
Bold Italic Rationale: The no-load test checks the elevator’s function
and safety systems without passengers, ensuring normal operation
before load testing.
8. Which of the following must be provided if an elevator car exceeds
two levels?
A. Voice annunciator only
B. Automatic rescue device (ARD)
C. Firefighter service only
D. Speed governor only
Bold Italic Rationale: An automatic rescue device is required for
elevators serving more than two levels to safely move passengers in
event of power failure.
9. What is the main hazard that door interlocks protect against?
A. Overhead collisions
B. Cable slack
C. Car movement when doors are open
D. Excessive speed
Bold Italic Rationale: Door interlocks prevent the car from moving
unless the doors are fully closed and locked, ensuring passenger
safety.
10. Which signal must an elevator provide in a power failure?
A. Music playback
B. Emergency communication device
C. Cabin ventilation only
D. Automatic stop only
Bold Italic Rationale: Elevators must have a means for passengers to
communicate with assistance during a power failure to comply with
safety regulations.
11. What is the maximum allowable car speed for a machine-
room-less (MRL) elevator under ASME A17.1?
