FCTC Final Test || A+ Verified.
Level ___ PPE should only be used when the atmosphere contains no known hazards and when
there is no potential for splashes, immersion, or inhalation of hazardous levels of chemicals.
correct answers D
How would a fuel/air mixture in which there is too much fuel be described? correct answers Too
rich
Master streams flow a minimum of correct answers 350 gpm
When hoisting a ladder, a ___ line should be attached to the bottom of the ladder to help control
it as it is hoisted correct answers tag
Signs that chemical protective clothing is undergoing the process of __- INCLUDE
discoloration, charring, swelling, shrinking correct answers degredation
Which of the following is a significant drawback to using the senses to detect the presence of
hazardous materials? correct answers Their use involves potential exposure to the hazard
What does the "R" stand for in the
"RIC"? correct answers Rapid
Which tool is commonly used in interior search and rescue? correct answers Thermal imaging
device
Which tool is classified as a rotating tool? correct answers Screwdriver
Fire fighters getting close enough to apply extinguishing agent directly on the fire is the
objective of which type of operation? correct answers Offensive
Which statement about structural steel is correct? correct answers Structural steel is the strongest
building material in terms of both tension and compression.
A fire department communication center functions most like a(n): correct answers human brain
What is the function of the PTT button on a two-way radio correct answers Cause the radio to
transmit
When should fire fighters begin to think about which tools they might need for a given call?
correct answers During the response
Which item is necessary to include in a life safety rope's documentation? correct answers History
of use
An oxygen-deficient atmosphere contains less than _____ percent oxygen. correct answers 19.5
, What is the term for the movement of heat and smoke from an area of higher pressure to lower
pressure? correct answers Flow path
Where should streams be directed to prevent a BLEVE? correct answers At the area where the
tank is being heated
Which is a commonly used method of extinguishing Class B fires? correct answers Excluding
the oxygen
Which type of adaptor is used to connect two female couplings to each other? correct answers
Double male
Which term is a measure of whether a material will burn? correct answers Combustibility
When is it permissible for fire fighters to wear partial PPE during salvage operations in the fire
area? correct answers Never
In which case should a downed fire fighter's face piece be replaced with the emergency face
piece from the rapid intervention pack? correct answers The victim's face piece is damaged
Which class of rope is designed to stretch significantly when loaded? correct answers Dynamic
To qualify as a light hazard for the purpose of extinguisher selection and placement, the majority
of materials in the area must correct answers be low combustibility
What is another term for fire point? correct answers Flash point
Common symptoms of smoke inhilation include: correct answers Headache and nausea
Where on a pumper is the trash line most commonly found? correct answers Front bumper
Which of the following statements best describes how hazardous materials regulations are
created? correct answers They are issued by governmental bodies such as OSHA.
What is another term for aerial fuels? correct answers Canopy
In which situation is it acceptable for a sprinkler system main control valve not to be locked into
the open position? correct answers A supervisory switch is installed.
The maximum slope of a low-angle rescue operation is _____ degrees correct answers 45
A NIOSH study found that unprotected lightweight engineered l-joist floor assemblies fail after
_____ minutes of fire exposure. correct answers 6
What does the "R" stand for in the LUNAR acronym? correct answers Resources
Level ___ PPE should only be used when the atmosphere contains no known hazards and when
there is no potential for splashes, immersion, or inhalation of hazardous levels of chemicals.
correct answers D
How would a fuel/air mixture in which there is too much fuel be described? correct answers Too
rich
Master streams flow a minimum of correct answers 350 gpm
When hoisting a ladder, a ___ line should be attached to the bottom of the ladder to help control
it as it is hoisted correct answers tag
Signs that chemical protective clothing is undergoing the process of __- INCLUDE
discoloration, charring, swelling, shrinking correct answers degredation
Which of the following is a significant drawback to using the senses to detect the presence of
hazardous materials? correct answers Their use involves potential exposure to the hazard
What does the "R" stand for in the
"RIC"? correct answers Rapid
Which tool is commonly used in interior search and rescue? correct answers Thermal imaging
device
Which tool is classified as a rotating tool? correct answers Screwdriver
Fire fighters getting close enough to apply extinguishing agent directly on the fire is the
objective of which type of operation? correct answers Offensive
Which statement about structural steel is correct? correct answers Structural steel is the strongest
building material in terms of both tension and compression.
A fire department communication center functions most like a(n): correct answers human brain
What is the function of the PTT button on a two-way radio correct answers Cause the radio to
transmit
When should fire fighters begin to think about which tools they might need for a given call?
correct answers During the response
Which item is necessary to include in a life safety rope's documentation? correct answers History
of use
An oxygen-deficient atmosphere contains less than _____ percent oxygen. correct answers 19.5
, What is the term for the movement of heat and smoke from an area of higher pressure to lower
pressure? correct answers Flow path
Where should streams be directed to prevent a BLEVE? correct answers At the area where the
tank is being heated
Which is a commonly used method of extinguishing Class B fires? correct answers Excluding
the oxygen
Which type of adaptor is used to connect two female couplings to each other? correct answers
Double male
Which term is a measure of whether a material will burn? correct answers Combustibility
When is it permissible for fire fighters to wear partial PPE during salvage operations in the fire
area? correct answers Never
In which case should a downed fire fighter's face piece be replaced with the emergency face
piece from the rapid intervention pack? correct answers The victim's face piece is damaged
Which class of rope is designed to stretch significantly when loaded? correct answers Dynamic
To qualify as a light hazard for the purpose of extinguisher selection and placement, the majority
of materials in the area must correct answers be low combustibility
What is another term for fire point? correct answers Flash point
Common symptoms of smoke inhilation include: correct answers Headache and nausea
Where on a pumper is the trash line most commonly found? correct answers Front bumper
Which of the following statements best describes how hazardous materials regulations are
created? correct answers They are issued by governmental bodies such as OSHA.
What is another term for aerial fuels? correct answers Canopy
In which situation is it acceptable for a sprinkler system main control valve not to be locked into
the open position? correct answers A supervisory switch is installed.
The maximum slope of a low-angle rescue operation is _____ degrees correct answers 45
A NIOSH study found that unprotected lightweight engineered l-joist floor assemblies fail after
_____ minutes of fire exposure. correct answers 6
What does the "R" stand for in the LUNAR acronym? correct answers Resources