Navy 3M
Study online at https://quizlet.com/_9w83eb
1. Schedules Weekly work center maintenance and supervises accomplish-
ments: Work Center Supervisor ( WCS )
2. WCS: Work Center Supervisor ( WCS )
3. Maintains an adequate amount of 3-M Materials within the Work Center: Work
Center Supervisor ( WCS )
4. Ensures the delivery of test and measurement equipment and other portable
support equipment is tested and up to calibration: Work Center Supervisor ( WCS )
5. The Maintenance Person reports to whom regarding..
Steps in the MRC that are not fully understood
If any tools, materials, et. are not available
Factors exist which would make performance of the maintenance requirement
unwise or dangerous: Work Center Supervisor ( WCS )
6. Can Substitute common tools, materials and test equipment that meet or
exceeds the SCAT code requirements: Work Center Supervisor ( WCS )
7. How often does the WCS schedule work center maintenance: Weekly
8. WCS can substitute common tools, materials and test equipment that meet
or exceeds what: SCAT code requirements
9. Serves as your Personel dashboard for the maintenance tasks awaiting action
within a given time frame: My Task / My Task view
10. By default it includes Maintenance Task due within the next two weeks: My Task
/ My Task view
11. My Task by default, includes Maintenance Task due within how long of a time
period: 2 weeks
12. Customized to your user catagory and place in your chain of command: My
Task / My Task view
13. Work Centers that have sub-standard performance metrics are notified
through what: My Task / My Task view
14. Triggered Global events that relate to MRC'S in your work Center are notified
though what: My Task / My Task view
1/7
, Navy 3M
Study online at https://quizlet.com/_9w83eb
15. Work Centers that have FRs past due
are notified through what: My Task / My Task view
16. Here, you can update your personal user information, such as user identifi-
cation, rate, and group: My Task Menu
17. Here, you can also reset your password: My Task Menu
18. This section displays the PMS checks that you are scheduled to perform and
the date the maintenance is due: PMS Checks
19. This section displays the PMS Alerts for a work Center in your role in the chain
of command for MRCs that are currently out of periodicity: PMS Alerts
20. Requires the Work Center Supervisor to provide a reason for the delay: PMS
Alerts
21. Feedback reports, Lineout approvals, Spot Checks, Training Assignments,
Work Center Closeouts and Revision Approvals are shown where: Other Sections
22. It's purpose is to Create, Maintain and Document the Work Centers Mainte-
nance: Work Center View
23. Most of the actions here are completed by a Work Center Supervisor: Work
Center View
24. Lists all work Centers that you'll have access to: Work Center View
25. Similar to the PMS Viewer except it is specific to the Work Center: PMS Document
Display
26. Work Center Supervisors can customize Work Centers, Perform review and
omit actions, and find location information through here: PMS Document Display
27. Enables you to access and search the tools, parts, and materials databases
used with the MRC Documents: SPMIG View
28. This information may be useful for ordering repair parts, gathering test
equipment information, or checking if an item is out of stock on the ship: SPMIG
View
29. PMS: Planned Maintenance System (PMS)
30. What is SKED: Planned Maintenance System (PMS)
31. CSMP: Current Ship's Maintenance Project ( CSMP )
2/7
Study online at https://quizlet.com/_9w83eb
1. Schedules Weekly work center maintenance and supervises accomplish-
ments: Work Center Supervisor ( WCS )
2. WCS: Work Center Supervisor ( WCS )
3. Maintains an adequate amount of 3-M Materials within the Work Center: Work
Center Supervisor ( WCS )
4. Ensures the delivery of test and measurement equipment and other portable
support equipment is tested and up to calibration: Work Center Supervisor ( WCS )
5. The Maintenance Person reports to whom regarding..
Steps in the MRC that are not fully understood
If any tools, materials, et. are not available
Factors exist which would make performance of the maintenance requirement
unwise or dangerous: Work Center Supervisor ( WCS )
6. Can Substitute common tools, materials and test equipment that meet or
exceeds the SCAT code requirements: Work Center Supervisor ( WCS )
7. How often does the WCS schedule work center maintenance: Weekly
8. WCS can substitute common tools, materials and test equipment that meet
or exceeds what: SCAT code requirements
9. Serves as your Personel dashboard for the maintenance tasks awaiting action
within a given time frame: My Task / My Task view
10. By default it includes Maintenance Task due within the next two weeks: My Task
/ My Task view
11. My Task by default, includes Maintenance Task due within how long of a time
period: 2 weeks
12. Customized to your user catagory and place in your chain of command: My
Task / My Task view
13. Work Centers that have sub-standard performance metrics are notified
through what: My Task / My Task view
14. Triggered Global events that relate to MRC'S in your work Center are notified
though what: My Task / My Task view
1/7
, Navy 3M
Study online at https://quizlet.com/_9w83eb
15. Work Centers that have FRs past due
are notified through what: My Task / My Task view
16. Here, you can update your personal user information, such as user identifi-
cation, rate, and group: My Task Menu
17. Here, you can also reset your password: My Task Menu
18. This section displays the PMS checks that you are scheduled to perform and
the date the maintenance is due: PMS Checks
19. This section displays the PMS Alerts for a work Center in your role in the chain
of command for MRCs that are currently out of periodicity: PMS Alerts
20. Requires the Work Center Supervisor to provide a reason for the delay: PMS
Alerts
21. Feedback reports, Lineout approvals, Spot Checks, Training Assignments,
Work Center Closeouts and Revision Approvals are shown where: Other Sections
22. It's purpose is to Create, Maintain and Document the Work Centers Mainte-
nance: Work Center View
23. Most of the actions here are completed by a Work Center Supervisor: Work
Center View
24. Lists all work Centers that you'll have access to: Work Center View
25. Similar to the PMS Viewer except it is specific to the Work Center: PMS Document
Display
26. Work Center Supervisors can customize Work Centers, Perform review and
omit actions, and find location information through here: PMS Document Display
27. Enables you to access and search the tools, parts, and materials databases
used with the MRC Documents: SPMIG View
28. This information may be useful for ordering repair parts, gathering test
equipment information, or checking if an item is out of stock on the ship: SPMIG
View
29. PMS: Planned Maintenance System (PMS)
30. What is SKED: Planned Maintenance System (PMS)
31. CSMP: Current Ship's Maintenance Project ( CSMP )
2/7
