CSWA QUIZ WITH COMPLETE SOLUTIONS
Dragging the edge of plane changes its geometric size - Correct Answers -False
which of the following methods can be used to begin a sketch on a plane
-selecting a plane in the graphics area and then clicking on the sketch button in the
CommandManager
-clicking on the sketch button in the CommandManager and then selecting a plane
-Right-clicking on a plane and selecting "Sketch" from the context toolbar
-All of the above - Correct Answers -All of the above
Which axis of the reference triad should be clicked to change the view normal to the
Top Plane - Correct Answers -Y-axis
In order to sketch on a face of a body, the face must be parallel with one of the three
default planes in SOLIDWORKS - Correct Answers -False
A face must be planer in order to have a sketch drawn on it. - Correct Answers -True
How does the smart dimension tool determine what type of dimension to add? - Correct
Answers -The proper dimension is based on the geometry you select.
How can you access the "smart dimension" tool?
-Launch the shortcut toolbar by pressing "S" on the keyboard and click "smart
dimension"
-use mouse-gestures by right-clicking and dragging up in the graphics area
-click the "smart dimension" icon from the Sketch tab of the CommandManager
-All of the above - Correct Answers -All of the above
When you select an arc, the smart dimension tool automatically adds what type of
dimension? - Correct Answers -Radical
Using the Modify Dialog box, how can you edit the value of a dimension?
-use the spinbox to increase or decrease the value
-use the arrows to increase or decrease the value
-click in the window and type in a new value
-all of the above - Correct Answers -All of the above
When dimensioning to centerlines, Solidworks provides the ability to change from linear
to diameter dimensions. - Correct Answers -True
which of the following line types cannot have a length specified prior to it being drawn? -
Correct Answers -As sketched
, Which of the following is not available option for a line? - Correct Answers -To make the
line "snap to axes"
Which line type includes an option to enable the "add dimensions" checkbox? - Correct
Answers -angle
using the blue inference lines while sketching will result in automatic relation being
established between sketch entities being drawn and other sketch geometry - Correct
Answers -False
Which method will not convert a line to a construction line? - Correct Answers -Selecting
a line in the graphics area, and then clicking the "centerline" button in the
CommandManger
The 3 point corner rectangle must be created using vertical and horizontal edges. -
Correct Answers -false
Which one of the following rectangle tools adds centerlines when the sketch entity is
drawn? - Correct Answers -Center rectangle
Which rectangle tool requires more than two points to be selected in order to draw the
sketch entity? - Correct Answers -parallelogram
To create a "3 point center rectangle" you first click at the center point, then click at the
midpoint of one edge of the rectangle, and then click to set the height of the rectangle. -
Correct Answers -true
Which of the following is NOT one of the options for adding construction lines when
selecting a Rectangle Type in the PropertyManager? - Correct Answers -Gridlines
The standard circle is created using ____ points while the perimeter circle requires____
points to be drawn - Correct Answers -2,3
After creating a perimeter circle, its center point cannot be selected since it was
interpolated using the three selected points on the perimeter. - Correct Answers -false
Which of the following is not a type of arc that can be created in SOLIDWORKS? -
Correct Answers -A "variable Arc"
Which arc tool only requires two points to be created? - Correct Answers -tangent arc
The tangent arc is the arc that requires existing geometry. - Correct Answers -true
The sketch fillet command trims away a corner to create a bevel in the remaining space.
- Correct Answers -false
Dragging the edge of plane changes its geometric size - Correct Answers -False
which of the following methods can be used to begin a sketch on a plane
-selecting a plane in the graphics area and then clicking on the sketch button in the
CommandManager
-clicking on the sketch button in the CommandManager and then selecting a plane
-Right-clicking on a plane and selecting "Sketch" from the context toolbar
-All of the above - Correct Answers -All of the above
Which axis of the reference triad should be clicked to change the view normal to the
Top Plane - Correct Answers -Y-axis
In order to sketch on a face of a body, the face must be parallel with one of the three
default planes in SOLIDWORKS - Correct Answers -False
A face must be planer in order to have a sketch drawn on it. - Correct Answers -True
How does the smart dimension tool determine what type of dimension to add? - Correct
Answers -The proper dimension is based on the geometry you select.
How can you access the "smart dimension" tool?
-Launch the shortcut toolbar by pressing "S" on the keyboard and click "smart
dimension"
-use mouse-gestures by right-clicking and dragging up in the graphics area
-click the "smart dimension" icon from the Sketch tab of the CommandManager
-All of the above - Correct Answers -All of the above
When you select an arc, the smart dimension tool automatically adds what type of
dimension? - Correct Answers -Radical
Using the Modify Dialog box, how can you edit the value of a dimension?
-use the spinbox to increase or decrease the value
-use the arrows to increase or decrease the value
-click in the window and type in a new value
-all of the above - Correct Answers -All of the above
When dimensioning to centerlines, Solidworks provides the ability to change from linear
to diameter dimensions. - Correct Answers -True
which of the following line types cannot have a length specified prior to it being drawn? -
Correct Answers -As sketched
, Which of the following is not available option for a line? - Correct Answers -To make the
line "snap to axes"
Which line type includes an option to enable the "add dimensions" checkbox? - Correct
Answers -angle
using the blue inference lines while sketching will result in automatic relation being
established between sketch entities being drawn and other sketch geometry - Correct
Answers -False
Which method will not convert a line to a construction line? - Correct Answers -Selecting
a line in the graphics area, and then clicking the "centerline" button in the
CommandManger
The 3 point corner rectangle must be created using vertical and horizontal edges. -
Correct Answers -false
Which one of the following rectangle tools adds centerlines when the sketch entity is
drawn? - Correct Answers -Center rectangle
Which rectangle tool requires more than two points to be selected in order to draw the
sketch entity? - Correct Answers -parallelogram
To create a "3 point center rectangle" you first click at the center point, then click at the
midpoint of one edge of the rectangle, and then click to set the height of the rectangle. -
Correct Answers -true
Which of the following is NOT one of the options for adding construction lines when
selecting a Rectangle Type in the PropertyManager? - Correct Answers -Gridlines
The standard circle is created using ____ points while the perimeter circle requires____
points to be drawn - Correct Answers -2,3
After creating a perimeter circle, its center point cannot be selected since it was
interpolated using the three selected points on the perimeter. - Correct Answers -false
Which of the following is not a type of arc that can be created in SOLIDWORKS? -
Correct Answers -A "variable Arc"
Which arc tool only requires two points to be created? - Correct Answers -tangent arc
The tangent arc is the arc that requires existing geometry. - Correct Answers -true
The sketch fillet command trims away a corner to create a bevel in the remaining space.
- Correct Answers -false
