ICC VAPOR RECOVERY VT CERTIFICATION
EXAMINATION 2026 QUESTIONS WITH
SOLUTIONS GRADED A+
◉ With a Gilbarco Vapor-Vac, the OPW 12VW nozzle has a hole or tear
in the vapor escape guard, it is a defect if ____% of the circumference is
missing.
a. 25%
b. 75%
c. 50%
d. 65%. Answer: b. 75%
◉ Gasoline thread sealant can be used on all except _____.
a. threaded portion of rotatable adapters
b. p/v valve
c. ball float
d. riser adapter. Answer: a. threaded portion of rotatable adapters
,◉ when installing copper tubing use all except _____.
a. copper tubing cutter
b. copper bending tool
c. copper flaring tool
d. copper stretching tool. Answer: d. copper stretching tool
◉ The Husky P/V valve has a torque range of...
a. 50-75 lbs
b. 20-50 lbs
c. 30-50 lbs
d. 40-50 lbs. Answer: b. 20-50 lbs
◉ When installing the hanging hardware together use...
a. pipe dope
b. non-hardening sealant
c. teflon tape
d. oil or grease. Answer: d. oil or grease
◉ When installing in the EO VR-101-E you should have on site _____.
, a. the executive order
b. Phil-tite installation manual
c. the equipment checklist
d. all the above. Answer: d. all the above
◉ There are four ball valves on the clean air separator, what position are
they to be in?
a. top and bottom valve open, the rest are closed
b. top and bottom valve closed, the rest are open
c. top valve open, the rest are closed
d. bottom valve open, the rest are closed. Answer: c. top valve open, the
rest are closed
◉ The drop tube used in EO #VR-101-E is the
a. OPW 61SO-PT
b. Phil-Tite 61SO-PT
c. EBW 61SO-PT
d. VST 61SO-PT. Answer: b. Phil-Tite 61SO-PT
EXAMINATION 2026 QUESTIONS WITH
SOLUTIONS GRADED A+
◉ With a Gilbarco Vapor-Vac, the OPW 12VW nozzle has a hole or tear
in the vapor escape guard, it is a defect if ____% of the circumference is
missing.
a. 25%
b. 75%
c. 50%
d. 65%. Answer: b. 75%
◉ Gasoline thread sealant can be used on all except _____.
a. threaded portion of rotatable adapters
b. p/v valve
c. ball float
d. riser adapter. Answer: a. threaded portion of rotatable adapters
,◉ when installing copper tubing use all except _____.
a. copper tubing cutter
b. copper bending tool
c. copper flaring tool
d. copper stretching tool. Answer: d. copper stretching tool
◉ The Husky P/V valve has a torque range of...
a. 50-75 lbs
b. 20-50 lbs
c. 30-50 lbs
d. 40-50 lbs. Answer: b. 20-50 lbs
◉ When installing the hanging hardware together use...
a. pipe dope
b. non-hardening sealant
c. teflon tape
d. oil or grease. Answer: d. oil or grease
◉ When installing in the EO VR-101-E you should have on site _____.
, a. the executive order
b. Phil-tite installation manual
c. the equipment checklist
d. all the above. Answer: d. all the above
◉ There are four ball valves on the clean air separator, what position are
they to be in?
a. top and bottom valve open, the rest are closed
b. top and bottom valve closed, the rest are open
c. top valve open, the rest are closed
d. bottom valve open, the rest are closed. Answer: c. top valve open, the
rest are closed
◉ The drop tube used in EO #VR-101-E is the
a. OPW 61SO-PT
b. Phil-Tite 61SO-PT
c. EBW 61SO-PT
d. VST 61SO-PT. Answer: b. Phil-Tite 61SO-PT
