2/17/26, 8:30 AM NTN FireTEAM Study Set Study Guide Exam fully solved & updated 2026 (latest version verified for accuracy) | 2025\2026 Latest!! …
NTN FireTEAM Study Set Study Guide Exam fully
solved & updated 2026 (latest version verified for
accuracy) | 2025\2026 Latest!!
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Terms in this set (50)
What do you use to tighten a bolt socket wrench
What shape is a drillbit used for sleek shape, not pointed, no pertruding edges for
metal operations at high speed to go through hard metal
or sometimes wood
what shape drillbit is hand operated the tip is a threaded point, pertruding edges to cut
for drilling wood through soft wood.
https://quizlet.com/1144754599/ntn-fireteam-study-set-study-guide-exam-fully-solved-updated-2026-latest-version-verified-for-accuracy-20252026-late… 1/7
, 2/17/26, 8:30 AM NTN FireTEAM Study Set Study Guide Exam fully solved & updated 2026 (latest version verified for accuracy) | 2025\2026 Latest!! …
what shape drillbit is used from squared off tip bit
ceramics/masonry
small gear vs big gear, what turns Big gear
faster?
When installing Bolt w/ washer and Threaded end goes away from body to prevent
nut, what side faces you? hazard
What tool is used to cut bolts? Hacksaw (NOT BOLTCUTTERS)
Mechanical Brick Factory: What do Stop, call mechanic
you do if there is unmelted material?
Mechanical Brick Factory: If you want Adjust amount released by Hopper, DONT adjust
more material from the start of the speed of belt
assembly, what do you do?
Mechanical Brick Factory: If the first There is a jam in the grinder
grinder is stuck, what do you
suspect?
Mechanical Brick Factory: How do You put it in reverse manually
you fix a grinder jam?
Mechanical Brick Factory: How do 1. Loosen middle nut
you remove a molding station arm? 2. then remove end nut
Mechanical Brick Factory: If water is Green Filter CLOG
pouring over the edge, what do you
suspect is wrong?
https://quizlet.com/1144754599/ntn-fireteam-study-set-study-guide-exam-fully-solved-updated-2026-latest-version-verified-for-accuracy-20252026-late… 2/7
NTN FireTEAM Study Set Study Guide Exam fully
solved & updated 2026 (latest version verified for
accuracy) | 2025\2026 Latest!!
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Terms in this set (50)
What do you use to tighten a bolt socket wrench
What shape is a drillbit used for sleek shape, not pointed, no pertruding edges for
metal operations at high speed to go through hard metal
or sometimes wood
what shape drillbit is hand operated the tip is a threaded point, pertruding edges to cut
for drilling wood through soft wood.
https://quizlet.com/1144754599/ntn-fireteam-study-set-study-guide-exam-fully-solved-updated-2026-latest-version-verified-for-accuracy-20252026-late… 1/7
, 2/17/26, 8:30 AM NTN FireTEAM Study Set Study Guide Exam fully solved & updated 2026 (latest version verified for accuracy) | 2025\2026 Latest!! …
what shape drillbit is used from squared off tip bit
ceramics/masonry
small gear vs big gear, what turns Big gear
faster?
When installing Bolt w/ washer and Threaded end goes away from body to prevent
nut, what side faces you? hazard
What tool is used to cut bolts? Hacksaw (NOT BOLTCUTTERS)
Mechanical Brick Factory: What do Stop, call mechanic
you do if there is unmelted material?
Mechanical Brick Factory: If you want Adjust amount released by Hopper, DONT adjust
more material from the start of the speed of belt
assembly, what do you do?
Mechanical Brick Factory: If the first There is a jam in the grinder
grinder is stuck, what do you
suspect?
Mechanical Brick Factory: How do You put it in reverse manually
you fix a grinder jam?
Mechanical Brick Factory: How do 1. Loosen middle nut
you remove a molding station arm? 2. then remove end nut
Mechanical Brick Factory: If water is Green Filter CLOG
pouring over the edge, what do you
suspect is wrong?
https://quizlet.com/1144754599/ntn-fireteam-study-set-study-guide-exam-fully-solved-updated-2026-latest-version-verified-for-accuracy-20252026-late… 2/7
