DANTE CERTIFICATION LEVEL 2 2ND EDITION
EXAM SCRIPT 2026 FULL QUESTIONS AND
CORRECT ANSWERS ALREADY PASSED
◉ Suppose a Dante device has one channel and two transmit flows. Can
it connect to three different receiving devices? Answer: Yes. Minimum
recommended latency could be as low as 0.5 msec.
◉ Approximately how much bandwidth does a unicast audio flow use?
(4-ch, 24-bit, 48kHz, 1msec latency) Answer: 6Mbps
◉ Dante Controller can apply information in a Dante preset to a device
of a different model. For instance, if a 4-channel 70V amplifier is
replaced with an 8-channel model, it could save the IP settings, device
name, as well as channel labels and subscriptions for the first four
channels. Answer: True
◉ When recalling a Dante Preset, you can choose to recall everything or
limit the recall to specific features and/or specific devices. Answer: True
, ◉ What happens if multiple devices have the Preferred Leader checkbox
marked? Answer: Both will be elevated in the clock election process,
only one of those two will be come the clock leader.
◉ When using redundant Dante networks, how do we configure the
switches? Answer: The primary and secondary networks must remain in
separate broadcast domains (could be a VLAN) and each network must
use separate subnets.
◉ Suppose a Dante device that is chasing an external clock (like word
clock or video sync). What setting must be checked in Dante Controller?
Answer: In Dante Controller, make sure the "External Clock" checkbox
is marked for this device.
◉ How many audio channels can be contained in a Dante unicast flow?
Answer: 4
◉ A unicast audio or video subscription: Answer: is the default behavior
for Dante devices.
◉ Since the beginning of Dante, multicast flows could carry [ __ ]
channels per flow. With newer firmware, some devices can allow up to [
__ ] channels per flow. Answer: 8, 64
EXAM SCRIPT 2026 FULL QUESTIONS AND
CORRECT ANSWERS ALREADY PASSED
◉ Suppose a Dante device has one channel and two transmit flows. Can
it connect to three different receiving devices? Answer: Yes. Minimum
recommended latency could be as low as 0.5 msec.
◉ Approximately how much bandwidth does a unicast audio flow use?
(4-ch, 24-bit, 48kHz, 1msec latency) Answer: 6Mbps
◉ Dante Controller can apply information in a Dante preset to a device
of a different model. For instance, if a 4-channel 70V amplifier is
replaced with an 8-channel model, it could save the IP settings, device
name, as well as channel labels and subscriptions for the first four
channels. Answer: True
◉ When recalling a Dante Preset, you can choose to recall everything or
limit the recall to specific features and/or specific devices. Answer: True
, ◉ What happens if multiple devices have the Preferred Leader checkbox
marked? Answer: Both will be elevated in the clock election process,
only one of those two will be come the clock leader.
◉ When using redundant Dante networks, how do we configure the
switches? Answer: The primary and secondary networks must remain in
separate broadcast domains (could be a VLAN) and each network must
use separate subnets.
◉ Suppose a Dante device that is chasing an external clock (like word
clock or video sync). What setting must be checked in Dante Controller?
Answer: In Dante Controller, make sure the "External Clock" checkbox
is marked for this device.
◉ How many audio channels can be contained in a Dante unicast flow?
Answer: 4
◉ A unicast audio or video subscription: Answer: is the default behavior
for Dante devices.
◉ Since the beginning of Dante, multicast flows could carry [ __ ]
channels per flow. With newer firmware, some devices can allow up to [
__ ] channels per flow. Answer: 8, 64
