FLORIDA CERTIFIED GENERAL CONTRACTOR EXAM 2026/2027 ACCURATE
EXAM REAL QUESTIONS WITH WELL ELABORATED ANSWERS (100% CORRECT
VERIFIED SOLUTIONS) LATEST UPDATED VERSION| GUARANTEED PASS A+|
BRAND NEW
1. What is the minimum required compressive strength of standard residential concrete
footing in Florida unless otherwise specified by design?
A. 2,000 psi
B. 2,500 psi
C. 3,000 psi
D. 3,500 psi
Answer: C. 3,000 psi
Rationale: Florida Building Code (FBC) commonly requires 3,000 psi concrete for
structural footings in residential construction unless engineered otherwise. Lower
strengths are generally not permitted for load-bearing applications.
2. What document must be recorded to establish priority rights for payment under
Florida lien law?
A. Notice of Commencement
B. Notice to Owner
C. Contractor’s Affidavit
D. Claim of Lien
Answer: A. Notice of Commencement
Rationale: The Notice of Commencement (NOC) must be recorded before work begins
to establish lien rights and priority under Florida Statute Chapter 713.
3. The minimum slope for asphalt shingles is:
A. 1:12
B. 2:12
C. 3:12
D. 4:12
Answer: B. 2:12
Rationale: Asphalt shingles require a minimum slope of 2:12. Slopes between 2:12 and
4:12 require additional underlayment protection per FBC.
4. In reinforced concrete, steel reinforcement is primarily used to resist:
,A. Compression
B. Shear
C. Tension
D. Torsion
Answer: C. Tension
Rationale: Concrete is strong in compression but weak in tension. Reinforcing steel
provides tensile strength to resist bending and cracking.
5. The minimum embedment depth for anchor bolts in masonry construction is typically:
A. 3 inches
B. 5 inches
C. 7 inches
D. 12 inches
Answer: C. 7 inches
Rationale: FBC requires anchor bolts embedded a minimum of 7 inches into masonry
or concrete unless engineered otherwise.
6. What is the maximum spacing for roof trusses in standard residential framing unless
otherwise designed?
A. 12 inches OC
B. 16 inches OC
C. 24 inches OC
D. 32 inches OC
Answer: C. 24 inches OC
Rationale: Standard truss spacing in residential construction is 24 inches on center
unless engineering specifies differently.
7. OSHA requires fall protection at heights of:
A. 4 feet
B. 5 feet
C. 6 feet
D. 8 feet
Answer: C. 6 feet
Rationale: OSHA requires fall protection for construction activities at 6 feet or more
above a lower level.
8. A change order becomes legally binding when:
, A. The contractor signs it
B. Work begins
C. Both parties sign it
D. Payment is issued
Answer: C. Both parties sign it
Rationale: A change order modifies the contract and must be agreed upon and signed
by both owner and contractor to be enforceable.
9. In Florida, workers’ compensation is required when a construction company has:
A. 1 employee
B. 2 employees
C. 3 employees
D. 4 employees
Answer: A. 1 employee
Rationale: In Florida construction, workers’ compensation coverage is required with
one or more employees.
10. The purpose of control joints in concrete slabs is to:
A. Increase strength
B. Prevent cracking
C. Allow controlled cracking
D. Improve curing
Answer: C. Allow controlled cracking
Rationale: Control joints create weakened planes so shrinkage cracking occurs in
straight, predictable lines.
11. The standard stair riser height maximum under FBC Residential is:
A. 7 inches
B. 7¾ inches
C. 8 inches
D. 8¼ inches
Answer: B. 7¾ inches
Rationale: The Florida Residential Code limits stair risers to a maximum of 7¾ inches.
12. What type of soil has the lowest bearing capacity?
A. Bedrock
B. Gravel
EXAM REAL QUESTIONS WITH WELL ELABORATED ANSWERS (100% CORRECT
VERIFIED SOLUTIONS) LATEST UPDATED VERSION| GUARANTEED PASS A+|
BRAND NEW
1. What is the minimum required compressive strength of standard residential concrete
footing in Florida unless otherwise specified by design?
A. 2,000 psi
B. 2,500 psi
C. 3,000 psi
D. 3,500 psi
Answer: C. 3,000 psi
Rationale: Florida Building Code (FBC) commonly requires 3,000 psi concrete for
structural footings in residential construction unless engineered otherwise. Lower
strengths are generally not permitted for load-bearing applications.
2. What document must be recorded to establish priority rights for payment under
Florida lien law?
A. Notice of Commencement
B. Notice to Owner
C. Contractor’s Affidavit
D. Claim of Lien
Answer: A. Notice of Commencement
Rationale: The Notice of Commencement (NOC) must be recorded before work begins
to establish lien rights and priority under Florida Statute Chapter 713.
3. The minimum slope for asphalt shingles is:
A. 1:12
B. 2:12
C. 3:12
D. 4:12
Answer: B. 2:12
Rationale: Asphalt shingles require a minimum slope of 2:12. Slopes between 2:12 and
4:12 require additional underlayment protection per FBC.
4. In reinforced concrete, steel reinforcement is primarily used to resist:
,A. Compression
B. Shear
C. Tension
D. Torsion
Answer: C. Tension
Rationale: Concrete is strong in compression but weak in tension. Reinforcing steel
provides tensile strength to resist bending and cracking.
5. The minimum embedment depth for anchor bolts in masonry construction is typically:
A. 3 inches
B. 5 inches
C. 7 inches
D. 12 inches
Answer: C. 7 inches
Rationale: FBC requires anchor bolts embedded a minimum of 7 inches into masonry
or concrete unless engineered otherwise.
6. What is the maximum spacing for roof trusses in standard residential framing unless
otherwise designed?
A. 12 inches OC
B. 16 inches OC
C. 24 inches OC
D. 32 inches OC
Answer: C. 24 inches OC
Rationale: Standard truss spacing in residential construction is 24 inches on center
unless engineering specifies differently.
7. OSHA requires fall protection at heights of:
A. 4 feet
B. 5 feet
C. 6 feet
D. 8 feet
Answer: C. 6 feet
Rationale: OSHA requires fall protection for construction activities at 6 feet or more
above a lower level.
8. A change order becomes legally binding when:
, A. The contractor signs it
B. Work begins
C. Both parties sign it
D. Payment is issued
Answer: C. Both parties sign it
Rationale: A change order modifies the contract and must be agreed upon and signed
by both owner and contractor to be enforceable.
9. In Florida, workers’ compensation is required when a construction company has:
A. 1 employee
B. 2 employees
C. 3 employees
D. 4 employees
Answer: A. 1 employee
Rationale: In Florida construction, workers’ compensation coverage is required with
one or more employees.
10. The purpose of control joints in concrete slabs is to:
A. Increase strength
B. Prevent cracking
C. Allow controlled cracking
D. Improve curing
Answer: C. Allow controlled cracking
Rationale: Control joints create weakened planes so shrinkage cracking occurs in
straight, predictable lines.
11. The standard stair riser height maximum under FBC Residential is:
A. 7 inches
B. 7¾ inches
C. 8 inches
D. 8¼ inches
Answer: B. 7¾ inches
Rationale: The Florida Residential Code limits stair risers to a maximum of 7¾ inches.
12. What type of soil has the lowest bearing capacity?
A. Bedrock
B. Gravel
