NTN FireTeam Test Practice Guide 2026
Questions with Answers
1. Nut -> Washer -> Spring
2. What do you use to tighten a Socket
bolt?
3. Gear question: If they want to Bigger gear goes faster
go fast
4. Bolt goes through and comes Threaded end pointed away from you so it is not a hazard
out other side with washer and
nut
5. What do you use to cut a bolt? Hacksaw
6. Unmelted material stop and call mechanic
7. Hopper Adjust how much comes out. DO NOT adjust speed of belt.
8. If it is not a matter of speed Adjust size of opening. DO NOT adjust speed
9. What do you do when the first Jam
grinder stops?
10. Grinder jam Reverse manually
1/5
, NTN FireTeam Test Practice Guide 2026
Questions with Answers
11. How to remove molding station Loosen middle nut then remove end nut
arm?
12. What is wrong if water is pour- Green filter clogged
ing over the edge?
13. Water tank is rising too quickly Reduce amount of fresh water
14. What is the purpose of washing Wash all sides of the material
in a shake motion?
15. Washing station: one pipe has 1 spout/head has most pressure
four pipes the other has one
spout at the end, which has the
most pressure?
16. Gear for washing machine turn clock wise to turn ott
17. Inside of gasket/washer distribute pressure and reduce chance of loosening
18. 50% cone volume B-middle line
19. 1 washing
20. 2 washing
21. 3 nothing
22. 4 mixing
23. 5 mixing
24. 6 nothing
25. 7 grinding
2/5
Questions with Answers
1. Nut -> Washer -> Spring
2. What do you use to tighten a Socket
bolt?
3. Gear question: If they want to Bigger gear goes faster
go fast
4. Bolt goes through and comes Threaded end pointed away from you so it is not a hazard
out other side with washer and
nut
5. What do you use to cut a bolt? Hacksaw
6. Unmelted material stop and call mechanic
7. Hopper Adjust how much comes out. DO NOT adjust speed of belt.
8. If it is not a matter of speed Adjust size of opening. DO NOT adjust speed
9. What do you do when the first Jam
grinder stops?
10. Grinder jam Reverse manually
1/5
, NTN FireTeam Test Practice Guide 2026
Questions with Answers
11. How to remove molding station Loosen middle nut then remove end nut
arm?
12. What is wrong if water is pour- Green filter clogged
ing over the edge?
13. Water tank is rising too quickly Reduce amount of fresh water
14. What is the purpose of washing Wash all sides of the material
in a shake motion?
15. Washing station: one pipe has 1 spout/head has most pressure
four pipes the other has one
spout at the end, which has the
most pressure?
16. Gear for washing machine turn clock wise to turn ott
17. Inside of gasket/washer distribute pressure and reduce chance of loosening
18. 50% cone volume B-middle line
19. 1 washing
20. 2 washing
21. 3 nothing
22. 4 mixing
23. 5 mixing
24. 6 nothing
25. 7 grinding
2/5
