Hyperbaric Study Guide Questions
and Answers
Considering hyperbaric safety, which of the following is NOT an ignition source of
concern: - ANS-Petroleum products, is a fuel source, not an ignition source.
Which of the following is NOT required by NFPA 99: - ANS-Garments made of 100%
cotton, are not required, blends of polyester and cotton are allowed.
Before 1980, most chamber fires were caused by - ANS-Electrical sources
According to NFPA 99, the maximum allowable temperature of equipment or electrical
circuits in any chamber is (60 degrees C) 140 degree F: - ANS-False, operating
surfaces of equipment in multiplace chambers are limited to 85 degree C 185 degree
F<br>
According to NFPA 99, which of the following is a limitation on electrical equipment
inside a Class B chamber:<br> - ANS-Limited to communications and patient
physiologic monitoring leads
According to NFPA 99, what is the power limitation on a communication system inside a
hyperbaric chamber: - ANS-No more than 28 volts, this applies to multiplace and to
monoplace chambers. For multiplace chambers, the limit is 28 volts and 0.5 watts.
The UHMS guidelines address: - ANS-Clinical practice of hyperbaric medicine
The acronym "ASME" stands for: - ANS-American Society of Mechanical Engineers
The acronym "PVOH" stands for:<br> - ANS-Pressure Vessels for Human Occupancy
The ASME Boiler and Pressure Vessel Code addresses: - ANS-Steam boilers, diving
bells, hyperbaric chambers, and other pressure vessels
ASME PVHO-2 is the newer edition of ASME PVHO-1. - ANS-False, PVHO-1
addresses the design, construction, and testing of acrylic windows in pressure vessels
for human occupancy. PVHO-2 is a "post construction" document, and addresses the
inspection and service life of acrylic windows that are in use in PVHO.
What is a viewpoint: - ANS-An assembly consisting of flange, retaining ring, seals, and
an acrylic windows
, According to ASME PVHO-2, how often should the acrylics on a clinical hyperbaric
chamber be inspected for scratches and crazing: - ANS-daily
According to the ASME PVHO-2, how often should a maintenance inspection be
performed on the acrylics on a clinical hyperbaric chamber: - ANS-Every 2-3 years
According to ASME PVHO-2, how often should a seat and seal inspection be
performed:<br> - ANS-Every 10 years
Proper cleaning and disinfection of chamber acrylics requires: - ANS-Never allow
organic solvents, because they can cause crazing
What are the symptoms of a round or oval window blowout: - ANS-Deafness in the
affected ear, tinnitus, vertigo
An ocular side effect of receiving HBOT is: - ANS-A worsening of myopia, difficulty in
focusing on distant objects. And An improvement of presbyopia is an age-related
difficulty focusing on close objects.<br>
Risk factors that increase the likelihood of an oxygen toxicity seizures are all of the
following EXCEPT: - ANS-Alpha tocopherial, (Vitamin E) it appears to provide a
protective mechanism against pulmonary oxygen toxicity and to raise the seizure
threshold.
All of the following will decrease the likelihood of an oxygen toxicity seizure EXCEPT: -
ANS-Levothyroxine (Synthroid), The pill itself will not increase risk of seizure, increased
amount of thyroid hormone will increase the risk of an O2 toxicity seizure.
An oxygen toxicity seizure is easily confused with a: - ANS-Hypoglycemic reaction
If your patient starts to become unresponsive and seizing you should: - ANS-Remove
the oxygen source
On average, a person taking anti-hyperglycemics will drop their blood sugar - ANS-50
mg/dL per treatment
The treatment for a hypoglycemic reaction is:<br> - ANS-Feed the patient if he/she is
conscious
If the patient has a hypoglycemic reaction and is seizing, how would you proceed: -
ANS-Administer 50% dextrose IV
A valsalva or Frenzel Maneuver are methods of:<br> - ANS-Minimizing ear barotrauma
on compression
Pulmonary oxygen toxicity presents as - ANS-Difficulty breathing, cough, substernal
pain
and Answers
Considering hyperbaric safety, which of the following is NOT an ignition source of
concern: - ANS-Petroleum products, is a fuel source, not an ignition source.
Which of the following is NOT required by NFPA 99: - ANS-Garments made of 100%
cotton, are not required, blends of polyester and cotton are allowed.
Before 1980, most chamber fires were caused by - ANS-Electrical sources
According to NFPA 99, the maximum allowable temperature of equipment or electrical
circuits in any chamber is (60 degrees C) 140 degree F: - ANS-False, operating
surfaces of equipment in multiplace chambers are limited to 85 degree C 185 degree
F<br>
According to NFPA 99, which of the following is a limitation on electrical equipment
inside a Class B chamber:<br> - ANS-Limited to communications and patient
physiologic monitoring leads
According to NFPA 99, what is the power limitation on a communication system inside a
hyperbaric chamber: - ANS-No more than 28 volts, this applies to multiplace and to
monoplace chambers. For multiplace chambers, the limit is 28 volts and 0.5 watts.
The UHMS guidelines address: - ANS-Clinical practice of hyperbaric medicine
The acronym "ASME" stands for: - ANS-American Society of Mechanical Engineers
The acronym "PVOH" stands for:<br> - ANS-Pressure Vessels for Human Occupancy
The ASME Boiler and Pressure Vessel Code addresses: - ANS-Steam boilers, diving
bells, hyperbaric chambers, and other pressure vessels
ASME PVHO-2 is the newer edition of ASME PVHO-1. - ANS-False, PVHO-1
addresses the design, construction, and testing of acrylic windows in pressure vessels
for human occupancy. PVHO-2 is a "post construction" document, and addresses the
inspection and service life of acrylic windows that are in use in PVHO.
What is a viewpoint: - ANS-An assembly consisting of flange, retaining ring, seals, and
an acrylic windows
, According to ASME PVHO-2, how often should the acrylics on a clinical hyperbaric
chamber be inspected for scratches and crazing: - ANS-daily
According to the ASME PVHO-2, how often should a maintenance inspection be
performed on the acrylics on a clinical hyperbaric chamber: - ANS-Every 2-3 years
According to ASME PVHO-2, how often should a seat and seal inspection be
performed:<br> - ANS-Every 10 years
Proper cleaning and disinfection of chamber acrylics requires: - ANS-Never allow
organic solvents, because they can cause crazing
What are the symptoms of a round or oval window blowout: - ANS-Deafness in the
affected ear, tinnitus, vertigo
An ocular side effect of receiving HBOT is: - ANS-A worsening of myopia, difficulty in
focusing on distant objects. And An improvement of presbyopia is an age-related
difficulty focusing on close objects.<br>
Risk factors that increase the likelihood of an oxygen toxicity seizures are all of the
following EXCEPT: - ANS-Alpha tocopherial, (Vitamin E) it appears to provide a
protective mechanism against pulmonary oxygen toxicity and to raise the seizure
threshold.
All of the following will decrease the likelihood of an oxygen toxicity seizure EXCEPT: -
ANS-Levothyroxine (Synthroid), The pill itself will not increase risk of seizure, increased
amount of thyroid hormone will increase the risk of an O2 toxicity seizure.
An oxygen toxicity seizure is easily confused with a: - ANS-Hypoglycemic reaction
If your patient starts to become unresponsive and seizing you should: - ANS-Remove
the oxygen source
On average, a person taking anti-hyperglycemics will drop their blood sugar - ANS-50
mg/dL per treatment
The treatment for a hypoglycemic reaction is:<br> - ANS-Feed the patient if he/she is
conscious
If the patient has a hypoglycemic reaction and is seizing, how would you proceed: -
ANS-Administer 50% dextrose IV
A valsalva or Frenzel Maneuver are methods of:<br> - ANS-Minimizing ear barotrauma
on compression
Pulmonary oxygen toxicity presents as - ANS-Difficulty breathing, cough, substernal
pain