AMMO CDC EVALUATION EXAM ACTUAL QUESTIONS AND
SOLUTIONS GRADED A+
✔✔The frequency of training required for pallet build-up personnel is: - ✔✔Initially and
annually
✔✔Within which wing(s) is a Commander's Inspection Program (CIP) required for
conducting internal inspections? - ✔✔All Air Force
✔✔A reason for an external inspection by an outside agency is: - ✔✔To validate and
verify the wing's internal inspection process.
✔✔What do protection levels do for Air Force resources? - ✔✔identifies specific items
you must secure and the level of security dedicated to those resources
✔✔What protection level is assigned to resources for which the loss, theft, destruction,
misuse or compromise would cause significant harm to the war-fighting capability of the
US? - ✔✔PL2( Protection Level 2)
✔✔What protection level is assigned to resources for which the loss, theft, destruction,
misuse or compromise would damage the war-fighting capability of the US? - ✔✔PL3(
Protection Level 3)
✔✔Name the two security areas where an ammo troop will likely perform his/her duties
- ✔✔Restricted and Controlled areas.
✔✔What is required for an individual to gain access into a restricted area? - ✔✔Written
permission from Commander and a form of positive ID.
✔✔What resources are generally stored within a controlled area? - ✔✔PL4 resources.
✔✔Give an example of when a national defense area may be used: - ✔✔any of the
following:
1 unplanned emergency dispersal of aircraft to civilian airports
2 emergency landings of aircraft carrying nuclear weapons
3 temporarily stopped nuclear weapon convoys
4 aircraft crashes or other unplanned emergency events
✔✔Where do authorized individuals go to gain access to a secure area? - ✔✔Through
the ECP
✔✔What munitions items are assigned a controlled inventory item code, and what is the
intended purpose of these codes? - ✔✔All munitions items are assigned a CIIC to
identify the degree of security that must be applied to an item while in storage or transit
, ✔✔What are the four categories of the CIICs? - ✔✔Classified, sensitive, pilferable, and
unclassified
✔✔Who has worldwide management responsibility for a specific munitions item and is
the only one who can change the CIIC for the applicable item? - ✔✔Item Manager
✔✔What type of items fall into the sensitive category, and what type of protection and
control is required? - ✔✔Includes such items as narcotics/controlled substances,
precious metals, high value assets, and hazardous items. This type of material requires
a high degree of protection and control due to statutory requirements or regulations.
✔✔When an item is assigned a pilferable code, what does that indicate about the item?
- ✔✔That has resale value or civilian utility application and is specially subject to theft.
✔✔What risk category includes explosive hand or rifle grenades? - ✔✔Risk Category
High
✔✔What are two conditions required for an OPSEC vulnerability? - ✔✔1. A weakness
that could reveal critical info
2. Am adversary with both the intent and the capability to exploit that weakness.
✔✔What are three operations indicators of OPSEC vulnerability? - ✔✔any three of the
following:
1. Stereotyped activities such as test preparations and range closures
2. Abrupt changes or cancellations of schedules
3. Increased telephone calls, conferences and longer working hours
4. Rehearsals of operations/exercises
5. Unusual or increased trips by senior officials
✔✔What are three communications indicators of OPSEC vulnerability? - ✔✔1. Changes
to power sources
2. Transmitter locations
3. Call signs
✔✔What are three administrative indicators of OPSEC vulnerability? - ✔✔1. Military
orders
2. Distinctive logos, emblems, and markings on equipment
3. Supplies
✔✔What are three logistics and maintenance support indicators of OPSEC
vulnerability? - ✔✔1. Prepositioned equipment
2. Technical representatives
3. Maintenance activity
SOLUTIONS GRADED A+
✔✔The frequency of training required for pallet build-up personnel is: - ✔✔Initially and
annually
✔✔Within which wing(s) is a Commander's Inspection Program (CIP) required for
conducting internal inspections? - ✔✔All Air Force
✔✔A reason for an external inspection by an outside agency is: - ✔✔To validate and
verify the wing's internal inspection process.
✔✔What do protection levels do for Air Force resources? - ✔✔identifies specific items
you must secure and the level of security dedicated to those resources
✔✔What protection level is assigned to resources for which the loss, theft, destruction,
misuse or compromise would cause significant harm to the war-fighting capability of the
US? - ✔✔PL2( Protection Level 2)
✔✔What protection level is assigned to resources for which the loss, theft, destruction,
misuse or compromise would damage the war-fighting capability of the US? - ✔✔PL3(
Protection Level 3)
✔✔Name the two security areas where an ammo troop will likely perform his/her duties
- ✔✔Restricted and Controlled areas.
✔✔What is required for an individual to gain access into a restricted area? - ✔✔Written
permission from Commander and a form of positive ID.
✔✔What resources are generally stored within a controlled area? - ✔✔PL4 resources.
✔✔Give an example of when a national defense area may be used: - ✔✔any of the
following:
1 unplanned emergency dispersal of aircraft to civilian airports
2 emergency landings of aircraft carrying nuclear weapons
3 temporarily stopped nuclear weapon convoys
4 aircraft crashes or other unplanned emergency events
✔✔Where do authorized individuals go to gain access to a secure area? - ✔✔Through
the ECP
✔✔What munitions items are assigned a controlled inventory item code, and what is the
intended purpose of these codes? - ✔✔All munitions items are assigned a CIIC to
identify the degree of security that must be applied to an item while in storage or transit
, ✔✔What are the four categories of the CIICs? - ✔✔Classified, sensitive, pilferable, and
unclassified
✔✔Who has worldwide management responsibility for a specific munitions item and is
the only one who can change the CIIC for the applicable item? - ✔✔Item Manager
✔✔What type of items fall into the sensitive category, and what type of protection and
control is required? - ✔✔Includes such items as narcotics/controlled substances,
precious metals, high value assets, and hazardous items. This type of material requires
a high degree of protection and control due to statutory requirements or regulations.
✔✔When an item is assigned a pilferable code, what does that indicate about the item?
- ✔✔That has resale value or civilian utility application and is specially subject to theft.
✔✔What risk category includes explosive hand or rifle grenades? - ✔✔Risk Category
High
✔✔What are two conditions required for an OPSEC vulnerability? - ✔✔1. A weakness
that could reveal critical info
2. Am adversary with both the intent and the capability to exploit that weakness.
✔✔What are three operations indicators of OPSEC vulnerability? - ✔✔any three of the
following:
1. Stereotyped activities such as test preparations and range closures
2. Abrupt changes or cancellations of schedules
3. Increased telephone calls, conferences and longer working hours
4. Rehearsals of operations/exercises
5. Unusual or increased trips by senior officials
✔✔What are three communications indicators of OPSEC vulnerability? - ✔✔1. Changes
to power sources
2. Transmitter locations
3. Call signs
✔✔What are three administrative indicators of OPSEC vulnerability? - ✔✔1. Military
orders
2. Distinctive logos, emblems, and markings on equipment
3. Supplies
✔✔What are three logistics and maintenance support indicators of OPSEC
vulnerability? - ✔✔1. Prepositioned equipment
2. Technical representatives
3. Maintenance activity
