NEIEP Guías de estudio, Notas de estudios & Resúmenes

NEIEP Unit 300 review Questions and Answers 2023 (Verified Answers by Expert)

NEIEP 100 elevator final exam (GRADED A) (Latest Version) Questions and Answers.p

NEIEP 400 Final review Exam With Questions And Answers ...

Neiep 300 Final Exam 2024 with Verified Solutions How should ammeters be used to take measurements in a circuit - Answer -Connected in series with the circuit What will happen to the current in a circuit if the resistance is doubled - Answer -Current will be halved How do you measure voltage in a circuit - Answer -Meter must be parallel with volt being measured What is the outermost shell of an atom called - Answer -Valence shell The Nucleus of an atom contains what - Answer -Neutrons and...

NEIEP 800 Final Review with Correct Solutions 2024 The total weight of your elevator (force) is 8100 lbs. and its plunger area is 50 square inches. What is the system pressure? - Answer -162 psi Refer to the NEIEP Moving Walk Final Layout. What is the correct wellway-to-wellway distance? - Answer -134' 11" Electrolysis is caused by which of the following? - Answer -Stray current corrosion and Galvanic corrosion BOTH ARE CORRECT When using wire rope, the diameter of the sheaves must be ...

NEIEP 400 Final Review with Correct Solutions 2024 Sandpaper - Answer -What material should be used for seating brushes? Test meter - Answer -Readings on the meter appear to be inaccurate, what should you do? Generator - Answer -A machine that converts mechanical energy into electrical energy Help prevent neutral plains from shifting - Answer -What is the purpose of interpoles in a motor? Motor armature - Answer -In the basic loop circuit generator armature supplies DC power to what DC el...

NEIEP 200 Final Review 2024 with Verified Solutions Which lay of wire rope has the strand wires in line with the rope axis? - Answer -Regular Lay At what speed should the counterweight safeties be set to trip? - Answer -Up to 10% higher than the car governor Which type of safety uses an oil buffer between the car and safety planks? - Answer -Type C What is the purpose of the terminal motion switch? - Answer -slow down and stop the car automatically at or near the top or bottom landing If...

Neiep 600 Final Exam Review 2024 Updated Zener current will decrease - Answer -Refer to figure 1. If the load resistance R2 is reduced by half what happens what happens to zener diode? 4v - Answer -Refer to figure 1. The zener diode is designed to breakdown at 6VDC what is the voltage drop across R1 with a constant DC supply of 10VDC 30 rpm - Answer -An elevators motor rotates at 1200 rpm at contract speed and is geard at a ratio of 40:1. If the motor turns 40 rpm the sheave turns 1 rpm. W...

Neiep 600 Final Exam 2024 with Verified Solutions In capacitors, what is the purpose of the dielectric? - Answer -Prevent arcing within the capacitor Which of the following is true about capacitors in AC circuits? - Answer -Current leads voltage all the time What describes a capacitor s ability to store an electrical charge? - Answer -Capacitance which of the following statements is correct about polarized electrolytic capacitors? - Answer -Voltage polarity must be correct What is the ti...

215 Hoist way structuresPitt structures The elevator pit is located between the sea level of the lowest landing and the. A. Bottom of the guide rails B. Buffer stand See. Floor of the elevator hoistway know. The correct answer is Four items of personal safety equipment you should have when working in the elevator hoist way are All measurements necessary for the installation of various components in the pit are measured with reference to the: A. Car buffers B. Guide rails C....

600 Final Review Zener current will decrease - correct answer Refer to figure 1. If the load resistance R2 is reduced by half what happens what happens to zener diode? 4v - correct answer Refer to figure 1. The zener diode is designed to breakdown at 6VDC what is the voltage drop across R1 with a constant DC supply of 10VDC 30 rpm - correct answer An elevators motor rotates at 1200 rpm at contract speed and is geard at a ratio of 40:1. If the motor turns 40 rpm the sheave turns 1 rpm. Wh...

625 NEIEPIf a fixed amount of current is flowing in the direction shown in Figure 1, which of the following statements is correct when viewed from the end of the wire marked X? A magnetic field will be developed which rotates in a counterclockwise rotation. Which of the following statements is true regarding AC in a purely inductive circuit? Current lags voltage by 90 degrees Which of the following statements describes how an air coil is magnetized ? As current is increased it event...