Interconnection Study guides, Study notes & Summaries

BICSI TECHNICIAN EXAM LATEST QUESTIONS WITH 100% CORRECT ANSWERS | 2024 UPDATE L Rating - Answer ️️ -A firestops ability to provide a smoke stop. (air leakage rate) To avoid damaging cable jacket, how often must you securely fasten electrical nonmetallic tubing (ENT) - Answer ️️ -3 Feet so it does not damage the cable What is the minimum dedicated power requirement of a telecommunications enclosure - Answer ️️ -120 V ac/20 The clearance behind the PBB when mounted, should be n...

Which of the following is true with regard to switchboards Switchboards are used to subdivide large blocks of power When installing wiring within switchgear, use self adhesive cable ties every ___. 12" (300mm) The maximum voltage that a piece of equipment can withstand is known as its ____. Basic impulse insulation level (BIL) Bolted pressure switches are often used in place of ___. Circuit breakers A transformer's temperature rise rating refers to ___. The maxim...

Final Exam: Progression: Field Tech III - IV Final Already Passed The open system interconnection reference model (OSI/R<) Network layer serves which primary function? It uses layer 3 addresses to create multiple routed networks The address 68.56.189.17 belongs to which internet protocol IP class? Class A What happens to a datagram sent by a higher level protocol to a 127.x.y.z address? The datagram loops back inside the host and never leaves the network interface card (NIC) Which device ...

At what torque angle of operation does power typically begin to flow from the generator to the system? A) 90 degrees B) 60 degrees C) 30 degrees D) 10 degrees 10 degrees Choose the answer that best describes the operation of a rotor. A) The stationary part of the transmission system. B) A type of superconductor. C) The stationary element of a generator that has its windings connected to the system. D) The excited (energized) field winding that rotates inside the stator to induce current into the...

Network and Security- Foundations- D315 Exam Questions And Answers TCP/IP Transmission Control Protocol/Internet Protocol Application Layer This layer is responsible for the communication protocols between nodes. The protocols in this layer include hypertext transfer protocol (HTTP and HTTPS), Secure Shell (SSH), and network time protocol (NTP), among many others. Transport Layer This layer is responsible for the end-to-end transport of data. The protocols that live in this laye...

During System Restoration, what is the optimal Frequency Range? - 59.75 - 61 Hz The 500 kV system has normal bus voltages between? - 500 to 550 kV When Connecting 2 islands, the operator must match? - Voltage, Phase Angle and Frequency What are the Minimum Source Requirements for a 500kV line? (Gen/mile and load/mile) - 30 MW Gen/mile of energized 500 kV and 20 MW Load/mile of energized 500 kV When will PJM issue a Minimum Generation Alert? (how many MW under normal operating limits) - Whe...

NCTI FINAL EXAM: PROGRESSION: FIELD TECH III - IV FINAL TEST EXAM 2023 REUPDATED SOLUTION The open system interconnection reference model (OSI/R<) Network layer serves which primary function? The address 68.56.189.17 belongs to which internet protocol IP class? What happens to a datagram sent by a higher level protocol to a 127.x.y.z address? Which device evaluates and acts upon a packet's internal protocol (IP) address? The network layer must do what to a recieved frame, i...

1. Which OSI(Open Systems Interconnection model) layer is related to the function of the IP protocol suite?: Network 2. Which OSI(Open Systems Interconnection model) layer is responsible for organizing how bits are passed over the physical layer between devices within the same collision domain?: Data link 3. Which OSI(Open Systems Interconnection model) layer would define the scope of a protocol that makes sure packets of data are received correctly and resends them if they are not?: Transpo...

NET + n10-008 Test Prep (200 Questions & Answers) all correct_2022. Which of the following organizations developed the Open Systems Interconnection (OSI) model? A. International Telecommunication Union (ITU-T) B. Comité Consultatif International Télégraphique et Téléphonique (CCITT) C. American National Standards Institute (ANSI) D. Institute of Electrical and Electronics Engineers (IEEE) E. International Organization for Standardization (ISO) - E. ISO developed and published the O...

An EXCITER on a traditional generator does what? - correct answer Voltage regulation (AVR) if you change the excitation current, you change the voltage. ECO Min, ECO Max, and EMERG Max are genrator _________________. - correct answer Limits When synchronizing to the interconnection, what needs to be synchronized? - correct answer Frequency, Voltage, and phase angle. GMD (GeoMagnetic Disturbance) procedure is implemented when? - correct answer 10A or greater is measured by specia...

NCTI Final Exam: Progression Field Tech 4- 5 Exam| 2023/ 2024 Update | Verified Questions and Answers 1. Which of the following, within the TCP/IP model layers, delivers packets to their destination across multiple networks, as does the Open Systems Interconnection (OSI) model Network Layer?  Answer: Internetwork Layer 2. The header of an Internet Control Message Protocol (ICMP) message includes a Type field. The number in this field represents a message type as well as the fo...

When using a dynamic schedule and the energy profile in an hour is >250 MW and the actual hourly integration deviates from the hourly energy profile by ____ the tag must be modified. A. 100 MW B. 10% C. 50 MW D. 25% B. 10% Dry steam plants, flash steam plants, and binary cycle power plants are the three main types of what kind of generating plant? A. Nuclear generators B. Combustion turbine generators C. Geothermal generators D. Hydroelectric generators C. Geothermal generators...