You will receive a 2 page fully detailed assignment answer to the following question: P8. use routines and carry out maintenance on given electro, pneumatic and hydraulic components and a given electro-pneumatic or electro-hydraulic system . part A..Carry out inspection checks on two of their following components: Linear Hydraulic Actuator, Hydraulic Vane or Gear Pump an Air compressor. part B. routine maintenance servicing on a hydraulic training rig in their training room as the mechanic indi...

-

4 pages

Written in 2020/2021

Grade A

itslalawork

You will receive fully detailed assignments from 8 to 16 pages quick note(100% not copied and paste!)with answer to all the following criteria for both assignments:FROM P1(Describe the structure(including atomic structure)associated with a given metal, polymer,ceramic,composite and smart material).TO D1 Justify your selection of an eng material..)

-

2 items

itslalawork

You will receive a 8 pages fully detailed with images responding to the following questions: P1:Describe the structure (including atomic structure) associated with a given metal, polymer, ceramic, composite and smart material. Part of Assignment 1 - Structure and Classification of Engineering Materials BTEC Level 3 Extended Diploma in Engineering: Unit 10 – Properties and Applications of Engineering Systems Know the structure of and classify engineering materials Atomic structure: element; a...

3.0

(1)

13 pages

Written in 2019/2020

itslalawork

**DISCOUNT ONLY VALID UNTIL 8th JAN 2024** You will receive fully detailed assignments from 8 to 20 pages quick note( 100% not copied and paste!) with answer to all the following criteria for the whole unit: FROM P 1 (describe the purpose and application , TO D2 ( justify the choice of engineering components in a given engineering application)

-

4 items

itslalawork

You will receive fully detailed pages of answers to the following questions: P5 Describe the operation of two different types of cam and follower and two different types of linkage mechanism P6 Describe the arrangement and operation of two different kinds of belt drive, two different kinds of chain drive and two different kinds of gear train

3.0

(1)

15 pages

Written in 2019/2020

itslalawork

You will receive fully detailed pages of answers to the following questions P3 Describe the operation of one seal, one type of packing and two different types of bearing, giving a typical application for each one. 1 P4 Describe two different types of screwed fastening and two different types of rivet giving a typical application for each one. [IE4] 2 D2 Justify the choice of engineering components in a given engineering application.

5.0

(1)

8 pages

Written in 2020/2021

Grade A

itslalawork

You will receive a detailed assignment answers to the following questions: P1: describe the purpose and application of three different types of lubricant P2 :describe the operation and maintenance of three different lubrication systems and P3: justify the use of a particular lubricant and lubrication system in a given engineering application

-

10 pages

Written in 2019/2020

itslalawork

**DISCOUNT Selling price NOW ONLY 4.99!!! VALID UNTIL MAY 2024** note(after that Selling price would change to 10.99) You will receive fully detailed assignment of about 35 pages! for achieving the perfect grade! , quick note( 100% not copied and paste!) with answer to all the following criteria for the whole unit: *M1* compare and contrast the operation and use of flat plate clutches, centrifugal clutches and fluid couplings in mechanical power transmission systems linkage mechanism * M...

4.3

(3)

35 pages

Written in 2020/2021

itslalawork

You will receive 8 pages fully detailed assignment answer to the following question: P3 Describe mechanical, physical, thermal and electrical and magnetic properties and state one practical application of each property in an engineering context P4 :Describe the effects on the properties and behaviour of processing metals, polymers, ceramics and composites and of post-production use of smart materials. P5Use information sources to select a different material for two given applications, describ...

4.0

(2)

10 pages

Written in 2019/2020

itslalawork

You will receive a 7 page detailed *without copying and pasting!* ; with images responding to the following question: P1:Describe the structure (including atomic structure) associated with a given metal, polymer, ceramic, composite and smart material. Part of Assignment 1 - Structure and Classification of Engineering Materials BTEC Level 3 Extended Diploma in Engineering: Unit 10 – Properties and Applications of Engineering Systems Know the structure of and classify engineering materials At...

-

8 pages

Written in 2019/2020

hshsbebs3

******30% OFF DISCOUNT when purchasing this bundle!****** You will receive fully detailed assignment answers to the following criterias: P1, P2, P3, P4, P5, P6, P7, P8, P9 & P10. BTEC Level 3 Engineering: Unit 4 - Mathematics for Engineering Technicians

-

10 items

premiumwork

******23% OFF DISCOUNT when purchasing this bundle!****** Assignment 2 - Maintenance Needs in a Complex Engineering System You will receive a 7 page fully detailed assignment answers to the following criterias: P4. P4: Identify two items of plant and equipment for a specified engineering system that require maintenance and describe the frequency at which it should be carried out, giving reasons why maintenance is needed. BTEC Level 3 Engineering: Unit 44 – Engineering Maintenance Procedure...

-

7 pages

Written in 2015/2016

premiumwork

You will receive a 5 page fully detailed assignment answer to the following question: D1: Produce a comprehensive plan for the maintenance of a specified engineered system containing all supporting documentation. BTEC Level 3 Engineering: Unit 44 – Engineering Maintenance Procedures and Techniques

5.0

(1)

6 pages

Written in 2015/2016

premiumwork

You will receive a 2 page fully detailed assignment answer to the following question: P7: Produce a basic maintenance plan for a specified engineering system containing supporting documentation with resource and procedure requirements. BTEC Level 3 Engineering: Unit 44 – Engineering Maintenance Procedures and Techniques

-

3 pages

Written in 2015/2016

premiumwork

******25% OFF DISCOUNT when purchasing this bundle!****** Assignment 3 - Fluid Systems You will receive fully detailed assignment answers to the following criterias: P5, P6, P7 & D2. BTEC Level 3 Engineering: Unit 5 – Mechanical Principles and Applications

-

4 items

premiumwork

You will receive a 2 page fully detailed assignment answer to the following question: D2: Evaluate the methods that might be used to determine the density of a solid material and the density of a liquid. BTEC Level 3 Engineering: Unit 5 – Mechanical Principles and Applications

1.0

(1)

4 pages

Written in 2015/2016

premiumwork

You will receive a 2 page fully detailed assignment answer to the following question: P9: Solve two or more problems that require application of thermodynamic process equations for a perfect gas to determine unknown parameters of the problems. BTEC Level 3 Engineering: Unit 5 – Mechanical Principles and Applications

5.0

(2)

3 pages

Written in 2015/2016

premiumwork

BTEC Engineering Level 3

-

11 pages

Written in 2017/2018

misterf

*****15% OFF DISCOUNT when purchasing this bundle!***** Assignment 1 - Applications of Lubricants and Lubrication Systems. You will receive fully detailed assignment answers to the following criterias: P1, P2 & D1. BTEC Level 3 Engineering: Unit 12 – Applications of Mechanical Systems in Engineering

-

3 items

premiumwork

You will receive a 2 page fully detailed assignment answer to the following question: D1: Justify the use of a particular lubricant and lubrication system in a given engineering application. BTEC Level 3 Engineering: Unit 12 – Applications of Mechanical Systems in Engineering

5.0

(2)

3 pages

Written in 2015/2016

premiumwork