CIP Level 2 NACE-CIP2-001 Practice Test Questions and Answers | Latest Version | 2025/2026 | Correct & Verified

CIP Level 2 NACE-CIP2-001 Practice Test Questions and Answers | Latest Version | 2025/2026 | Correct & Verified What is the primary purpose of surface preparation in coating application? To remove contaminants and create a profile that promotes coating adhesion. Which type of corrosion occurs uniformly across a metal surface? Uniform corrosion. Why is abrasive blasting preferred for cleaning steel surfaces? It removes rust, mill scale, and old coatings efficiently while creating a proper surface profile. What is the main function of a primer coating? To provide corrosion protection and promote adhesion of subsequent coats. Which tool is used to measure dry film thickness? Magnetic or electronic thickness gauge. Why is it important to check the dew point before coating? To prevent condensation, which can cause adhesion failure and coating defects. 2 Which surface contaminant is most likely to cause coating failure? Oil or grease residues. What is the purpose of an intermediate coat? To build film thickness, enhance corrosion resistance, and provide a uniform surface for the topcoat. Why must coatings be applied within the overcoating interval? To ensure proper adhesion between layers and prevent delamination. Which coating defect appears as small holes exposing the substrate? Pinholing. Why is surface profile important for coating performance? It provides mechanical anchoring, improving adhesion and longevity. Which environmental factor most accelerates steel corrosion? Moisture and oxygen exposure. What is the main cause of blistering in coatings? Trapped moisture or solvent under the coating. 3 Why is measuring relative humidity important during coating application? High humidity can lead to condensation and coating failures. Which type of corrosion occurs in shielded areas like joints or under deposits? Crevice corrosion. Why should coatings be inspected for holidays? To detect discontinuities that expose the substrate to corrosion. Which instrument is used to detect coating holidays? Holiday or spark tester. What does DFT stand for in coating inspection? Dry Film Thickness. Why is flexibility an important property for some coatings? It allows the coating to expand and contract without cracking. Which defect is caused by solvent or air escaping through a wet coat? Pinholing. Why is it important to check coating adhesion? 4 To ensure the coating will resist peeling and delamination. Which defect is identified by powdery residue on the surface? Chalking. What is the function of pigments in coatings? Provide color, UV protection, and corrosion resistance. Why should a home inspector examine for cathodic protection? To verify the system is preventing corrosion effectively. Which condition accelerates flash rusting on prepared steel? High humidity or rain after abrasive blasting. Why is proper coating thickness critical? To provide adequate protection without defects like sagging or cracking. Which coating defect looks like wrinkled skin? Wrinkling. What is the primary purpose of a topcoat? Provide weather and