NEIEP 800 Final Exam (Latest
Update) Questions and Verified Answers
100% Correct {Grade A}
The _____ _____ short radius spiral is a type of short radius spiral. -correct answer
double 90
The capacity of a chairlift shall not exceed two persons. The rated load shall not be
less than _____ lbs for a one seat lift and not less than _____ lbs for a two seat lift. The
speed shall not exceed _____ fpm. -correct answer 250, 400, 40
(True/False) With platform lifts, codes require a handrail between 1 and 3 inches in
diameter, 1 1/2 inches minimum from the wall and 34 to 38 inches above the stair
tread nosing. -correct answer True
Per code, where the actuation of the safeties is by a governor, the safety shall be set
at a maximum speed of _____ fpm -correct answer 75
With platform lifts, the _____ is referring to the space occupied by the lifts' travel
whether it is enclosed, partially enclosed or open construction. -correct answer
Runway
Routine tests and inspections are to be made every _____ months for LULA's in
buildings other than private residences and every _____ for private residences. -correct
answer 6, year
, NEIEP 800 Final Exam (Latest
Update) Questions and Verified Answers
100% Correct {Grade A}
What is the minimum height of a barricade in place around an open wellway? -correct
answer 42"
What is the maximum angle of inclination for moving walks? -correct answer 12
degrees
The major advantage of a hydraulic elevator is that it __________ _________ building
structural support. -correct answer requires less
What would be the effect of increasing the size of the oil line if all other elements in a
hydraulic elevator system remain the same? -correct answer Rate of flow is increased
A __________ __________ is used to check a jack hole for plumb. -correct answer spider
bob
What is the operating pressure of a hydraulic elevator with a gross weight of 1500
pounds and a plunger area of 15 square inches? -correct answer 100 psi
One gallon equals __________ cubic inches. -correct answer 231
Why is it important to follow a welding procedure using a sequence of short welds on
opposite sides of the cylinder? -correct answer To prevent warping the cylinder
Update) Questions and Verified Answers
100% Correct {Grade A}
The _____ _____ short radius spiral is a type of short radius spiral. -correct answer
double 90
The capacity of a chairlift shall not exceed two persons. The rated load shall not be
less than _____ lbs for a one seat lift and not less than _____ lbs for a two seat lift. The
speed shall not exceed _____ fpm. -correct answer 250, 400, 40
(True/False) With platform lifts, codes require a handrail between 1 and 3 inches in
diameter, 1 1/2 inches minimum from the wall and 34 to 38 inches above the stair
tread nosing. -correct answer True
Per code, where the actuation of the safeties is by a governor, the safety shall be set
at a maximum speed of _____ fpm -correct answer 75
With platform lifts, the _____ is referring to the space occupied by the lifts' travel
whether it is enclosed, partially enclosed or open construction. -correct answer
Runway
Routine tests and inspections are to be made every _____ months for LULA's in
buildings other than private residences and every _____ for private residences. -correct
answer 6, year
, NEIEP 800 Final Exam (Latest
Update) Questions and Verified Answers
100% Correct {Grade A}
What is the minimum height of a barricade in place around an open wellway? -correct
answer 42"
What is the maximum angle of inclination for moving walks? -correct answer 12
degrees
The major advantage of a hydraulic elevator is that it __________ _________ building
structural support. -correct answer requires less
What would be the effect of increasing the size of the oil line if all other elements in a
hydraulic elevator system remain the same? -correct answer Rate of flow is increased
A __________ __________ is used to check a jack hole for plumb. -correct answer spider
bob
What is the operating pressure of a hydraulic elevator with a gross weight of 1500
pounds and a plunger area of 15 square inches? -correct answer 100 psi
One gallon equals __________ cubic inches. -correct answer 231
Why is it important to follow a welding procedure using a sequence of short welds on
opposite sides of the cylinder? -correct answer To prevent warping the cylinder
