CLINICAL MICROSCOPY (Strasinger and Harr)
Exam Questions with Verified Solutions 100%
Verified
Save
Terms in this set (808)
In the urinalysis laboratory C. Specimens
the primary source in the
chain of infection would
be:
A. Patients
B. Needlesticks
C. Specimens
D. Biohazardous waste
The best way to break the A. Hand sanitizing
chain of infection is:
A. Hand sanitizing
B. Personal protective
equipment
C.Aerosol prevention
D. Decontamination
, D. Standard Precautions
The current routine - combined features of UP, BSI, and hand hygiene
infection control policy (1996)
developed by CDC and
followed in all health-care Universal Precautions (UP): states all patients are
settings is: considered possible carriers of blood-borne
A. Universal Precautions pathogens; urine and body fluids NOT visibly
B. Isolation Precautions contaminated by blood are NOT infectious
C. Blood and Body Fluid
Precautions Body Substance Isolation (BSI): states that ALL body
D. Standard Precautions fluids and blood are infectious, but did NOT
recommend hand washing
An employee who is A. Report to a supervisor
accidentally exposed to a
possible blood-borne
pathogen should
immediately:
A. Report to a supervisor
B. Flush the area with
water
C. Clean the area with
disinfectant
D. Receive HIV
prophylaxis
All of the following should A. Urine specimen containers
be discarded in
biohazardous waste
containers except:
A. Urine specimen
containers
B. Towels used for
decontamination
C. Disposable lab coats
D. Blood collection tubes
,When combining acid and A. Acid is added to water
water, ensure that:
A. Acid is added to water
B. Water is added to acid
C.They are added
simultaneously
D. Water is slowly added
to acid
C. Dry chemicals
A: Wood, Paper, Clothing (A -
Water)
B: Flammable organic
A class ABC fire
chemicals/liquids (B - Dry
extinguisher contains:
chemicals, CO2, FOAM, Halon)
A. Sand
C: Electrical (C - Dry chemicals,
B. Water
CO2, Halon)
C. Dry chemicals
D: Combustible materials (None
D. Acid
- Sand/Dry Powder; ABC - Dry
chemicals)
K: Grease, oils, fats (K - Liquid
designed to prevent splashing
and cool the fire)
The testing of sample D. Proficiency testing
from an outside agency - AKA External Quality Assessment
and the comparison of
results with participating External QC: verifies the functional ability of a testing
laboratories is called: device, but does not verify the integrity of testing
A. External QC supplies
B. Electronic QC
C. Internal QC
D. Proficiency testing
, A color change that C. Internal QC
indicates that a sufficient - AKA Procedural Controls
amount of patient's
specimen or reagent is It monitors the sufficient addition of a patient
added correctly to the specimen or reagent, instruments/ reagents
test system would be an interaction, and for lateral flow test methods whether
example of: the sample migrated through the test strip properly
A. External QC
B. Equivalent QC
C. Internal QC
D. Proficiency testing
.When a new bottle of QC C. The date and the laboratory worker's initials
material is opened, what
information is placed on
the label?
A. The supervisor's initials
B. The lot number
C.The date and the
laboratory worker's initials
D.The time the bottle was
opened
When a control is run, D. All of the above
what information is
documented?
A. The lot number
B. Expiration date of the
control
C.The test results
D. All of the above
Exam Questions with Verified Solutions 100%
Verified
Save
Terms in this set (808)
In the urinalysis laboratory C. Specimens
the primary source in the
chain of infection would
be:
A. Patients
B. Needlesticks
C. Specimens
D. Biohazardous waste
The best way to break the A. Hand sanitizing
chain of infection is:
A. Hand sanitizing
B. Personal protective
equipment
C.Aerosol prevention
D. Decontamination
, D. Standard Precautions
The current routine - combined features of UP, BSI, and hand hygiene
infection control policy (1996)
developed by CDC and
followed in all health-care Universal Precautions (UP): states all patients are
settings is: considered possible carriers of blood-borne
A. Universal Precautions pathogens; urine and body fluids NOT visibly
B. Isolation Precautions contaminated by blood are NOT infectious
C. Blood and Body Fluid
Precautions Body Substance Isolation (BSI): states that ALL body
D. Standard Precautions fluids and blood are infectious, but did NOT
recommend hand washing
An employee who is A. Report to a supervisor
accidentally exposed to a
possible blood-borne
pathogen should
immediately:
A. Report to a supervisor
B. Flush the area with
water
C. Clean the area with
disinfectant
D. Receive HIV
prophylaxis
All of the following should A. Urine specimen containers
be discarded in
biohazardous waste
containers except:
A. Urine specimen
containers
B. Towels used for
decontamination
C. Disposable lab coats
D. Blood collection tubes
,When combining acid and A. Acid is added to water
water, ensure that:
A. Acid is added to water
B. Water is added to acid
C.They are added
simultaneously
D. Water is slowly added
to acid
C. Dry chemicals
A: Wood, Paper, Clothing (A -
Water)
B: Flammable organic
A class ABC fire
chemicals/liquids (B - Dry
extinguisher contains:
chemicals, CO2, FOAM, Halon)
A. Sand
C: Electrical (C - Dry chemicals,
B. Water
CO2, Halon)
C. Dry chemicals
D: Combustible materials (None
D. Acid
- Sand/Dry Powder; ABC - Dry
chemicals)
K: Grease, oils, fats (K - Liquid
designed to prevent splashing
and cool the fire)
The testing of sample D. Proficiency testing
from an outside agency - AKA External Quality Assessment
and the comparison of
results with participating External QC: verifies the functional ability of a testing
laboratories is called: device, but does not verify the integrity of testing
A. External QC supplies
B. Electronic QC
C. Internal QC
D. Proficiency testing
, A color change that C. Internal QC
indicates that a sufficient - AKA Procedural Controls
amount of patient's
specimen or reagent is It monitors the sufficient addition of a patient
added correctly to the specimen or reagent, instruments/ reagents
test system would be an interaction, and for lateral flow test methods whether
example of: the sample migrated through the test strip properly
A. External QC
B. Equivalent QC
C. Internal QC
D. Proficiency testing
.When a new bottle of QC C. The date and the laboratory worker's initials
material is opened, what
information is placed on
the label?
A. The supervisor's initials
B. The lot number
C.The date and the
laboratory worker's initials
D.The time the bottle was
opened
When a control is run, D. All of the above
what information is
documented?
A. The lot number
B. Expiration date of the
control
C.The test results
D. All of the above
