Pipefitter Star Exam 2025| Questions and 100% Correct Answers| Latest !

Pipefitter Star Exam 2025| Questions and 100% Correct Answers| Latest ! What type of knot or hitch can be used for lifting a length of small-bore pipe vertically? a. bowline b. clove hitch c. granny knot d. sheepshank b. clove hitch What type of crane signal includes pointing the index finger to the ground and moving it in a circular motion? a. hoist b. lower c. boom down d. boom out b. lower What type of hand signal includes pointing the thumb down to the side of the body? a. lower b. hoist c. lower boom d. move slowly c. lower boom Any crane signal in the palm of the hand means ________. a. move quickly b. move slowly c. to move towards the direction of the open hand d. swing boom b. move slowly When the dog everything signal is given, the crane operator is to ___________. a. bring their dog to work b. stop all creane movement c. finish the last crane movement then stop d. go to lunch break b. stop all creane movement Who is allowed to signal the crane? a. as many workers as the operation needs. b. 2 workers c. the flagger and signal person d. the lift directory and crane signal person. c. the flagger and signal person Who can give the emergency stop crane signal? a. only the assigned signal person b. only the flagger c. anyone d. only the lift director c. anyone Which sling configuration provides the greatest capacity? a. vertical b. choker c. double wrap choker hitch d. basket hitch d. basket hitch Which sling angle places the slings under the greatest strain? a. 90 degree b. 75 degree c. 60 degree d. 45 degree d. 45 degree What is the rigging tool called? a. beam grabber b. cowboy clamp c. beam clamp d. side clamp c. beam clamp Which is the correct way to install wire rope clamps? a. 1 b. 2 c. 3 a. 1 When hoisting a load with sharp edges, you should use ______. a. softener b. shackle c. block and tackle d. a grinder to round the sharp edge(s) a. softener What is the safety factor for rigging slings? a. 3 to 1 b. 5 to 1 c. 10 to 1 d. 15 to 1 b. 5 to 1 What type of sensor is installed directly in the process stream? a. insertion b. immersion c. averaging d. remote bulb b. immersion Which component in a closed control loop is the primary element?