TACTICAL COMMUNICATIONS PRACTICE
TEST: 2025/2026, WITH
CORRECT/ACCURATE ANSWERS
Involves the mastery of specific techniques used to manage interactions
effectively, especially in high-stress, high-stakes, or potentially volatile
situations (e.g., law enforcement, military, emergency services, crisis
negotiation).
The goal of tactical communication is not just information exchange, but
de-escalation, gaining voluntary compliance, gathering intelligence, and
ensuring safety through professional, controlled, and strategic dialogue.
TACTICAL COMMUNICATIONS
5 methods of communication - CORRECT-ANSWERS--visual sound
messenger wired radio
SINCGARS - CORRECT-ANSWERS--Single Channel Ground Airborne Radio
System
ASIP - CORRECT-ANSWERS--Advanced System Improvement Program
3 radio frequency spectrum - CORRECT-ANSWERS--HF high frequency
vHF Very High Frequency
uHF Ultra High Frequency
3 frequency modulation types - CORRECT-ANSWERS--line of sight, sky
wave, satellite
, frequency modulation type of an ASIP Radio - CORRECT-ANSWERS--line of
sight
frequency spectrom range of ASIP radio is - CORRECT-ANSWERS--30MHz
to 87,975 MHz
2 operating modes of ASIP - CORRECT-ANSWERS--Single Channel or SC
Frequency Hopping FH
2 Encryption modes of ASIP - CORRECT-ANSWERS--Plain Text or PT
Cypher Text or CT
3 problems associated with talking on one channel same frequency -
CORRECT-ANSWERS--Enemy can: monitor communications, jam
communications, pinpoint location
times per second does the frequency hop inf FH - CORRECT-ANSWERS—
100 >>> Frequency hopping in FHSS (Frequency-Hopping Spread
Spectrum) systems occurs at varying rates depending on the specific
application and standards being used. There is no single universal answer,
as the rate is determined by the system's design and regulatory
requirements
NET stands for - CORRECT-ANSWERS--Network Synchronization Time
In the FH and CT modes, radios need to be within +/- __ seconds of time
to communicate - CORRECT-ANSWERS--4 seconds >>> The required time
tolerance is typically +/- 4 seconds.
If the radios are outside this window, they will not be able to establish or
maintain communication because they will be transmitting and listening
on different frequencies at any given moment. This strict time
TEST: 2025/2026, WITH
CORRECT/ACCURATE ANSWERS
Involves the mastery of specific techniques used to manage interactions
effectively, especially in high-stress, high-stakes, or potentially volatile
situations (e.g., law enforcement, military, emergency services, crisis
negotiation).
The goal of tactical communication is not just information exchange, but
de-escalation, gaining voluntary compliance, gathering intelligence, and
ensuring safety through professional, controlled, and strategic dialogue.
TACTICAL COMMUNICATIONS
5 methods of communication - CORRECT-ANSWERS--visual sound
messenger wired radio
SINCGARS - CORRECT-ANSWERS--Single Channel Ground Airborne Radio
System
ASIP - CORRECT-ANSWERS--Advanced System Improvement Program
3 radio frequency spectrum - CORRECT-ANSWERS--HF high frequency
vHF Very High Frequency
uHF Ultra High Frequency
3 frequency modulation types - CORRECT-ANSWERS--line of sight, sky
wave, satellite
, frequency modulation type of an ASIP Radio - CORRECT-ANSWERS--line of
sight
frequency spectrom range of ASIP radio is - CORRECT-ANSWERS--30MHz
to 87,975 MHz
2 operating modes of ASIP - CORRECT-ANSWERS--Single Channel or SC
Frequency Hopping FH
2 Encryption modes of ASIP - CORRECT-ANSWERS--Plain Text or PT
Cypher Text or CT
3 problems associated with talking on one channel same frequency -
CORRECT-ANSWERS--Enemy can: monitor communications, jam
communications, pinpoint location
times per second does the frequency hop inf FH - CORRECT-ANSWERS—
100 >>> Frequency hopping in FHSS (Frequency-Hopping Spread
Spectrum) systems occurs at varying rates depending on the specific
application and standards being used. There is no single universal answer,
as the rate is determined by the system's design and regulatory
requirements
NET stands for - CORRECT-ANSWERS--Network Synchronization Time
In the FH and CT modes, radios need to be within +/- __ seconds of time
to communicate - CORRECT-ANSWERS--4 seconds >>> The required time
tolerance is typically +/- 4 seconds.
If the radios are outside this window, they will not be able to establish or
maintain communication because they will be transmitting and listening
on different frequencies at any given moment. This strict time
