BECC MOD 1 practice exam questions
and answers 100% verified
What ARE 3 considerations when dealing with electrical burns? - CORRECT ANSWER-
Electrical current may burn a large area just below the surface
Perform CPR if needed
Treatment is the same as for a thermal burn
(True/False) Section 300 of the PQS book list infrequent task and abnormal conditions.
- CORRECT ANSWER-TRUE
The overall purpose of PQS is to ...... - CORRECT ANSWER-provide a means to qualify
ships personnel.
(True/False) PQS provides an effective way to monitor an individual's qualification
progress. - CORRECT ANSWER-TRUE
When can your Final Qualification Page be signed?. - CORRECT ANSWER-After all
line items have been completed and signed
Vocabulary used in each qualification can be found in the ....... Section of the PQS
book. - CORRECT ANSWER-FUNDAMENTALS
Progress and completed qualifications of each person in the division are displayed on/in
the ....... - CORRECT ANSWER-PROGRESS CHART
Who is the final qualification authority? - CORRECT ANSWER-COMMANDING
OFFICER
A five inch outside micrometer will measure objects that are ....... inches thick. -
CORRECT ANSWER-4-5IN
A Dial indicator may be used to....... - CORRECT ANSWER-ALIGN MACHINERY
It is NOT safe to operate electrical power tools in areas where ....... is/are present. -
CORRECT ANSWER-FLAMMABLE GASES
Electrical power tools must be inspected prior to issue by a qualified ....... - CORRECT
ANSWER-ELECTRICIAN
A torque wrench is used to measure the tightness of ... - CORRECT ANSWER-
FASTENERS
, Torque wrenches are considered ....... equipment - CORRECT ANSWER-PRECISION
If a maintenance procedure does not specify a torque sequence, utilize the
recommended sequence found in ....... - CORRECT ANSWER-NTM CHAPER 075
Which document contains maintenance requirements pertaining to all equipment in a
command? - CORRECT ANSWER-PMS MASTER FILE
16. Which portion of the PMS Master File provides the work center supervisor a ready
reference of planned maintenance requirements.? - CORRECT ANSWER-WORK
CENTER PMS MANUAL
If a planned maintenance action cannot be completed in accordance with the steps
listed on the MRC, the maintenance man should ....... - CORRECT ANSWER-STOP
AND REPORT TO THE WCS
What is used to notify personnel that death or injury may result if the operating
procedures and practices are NOT correctly followed? - CORRECT ANSWER-Warnings
Which of the following serves as the "Table of Contents" for the Work Center PMS
manual? - CORRECT ANSWER-LIST OF EFFECTIVE PAGES (LOEP)
The SYSCOM Control Number assigned for each maintenance requirement listed in a
MIP must match the number on the corresponding - CORRECT ANSWER-MRC
(maintenance requirement card)
Materials needed to perform the required maintenance are found on the - CORRECT
ANSWER-FRONT OF THE MRC
The responsibility to replace a missing MRC belongs to the ....... - CORRECT
ANSWER-WORK CENTER SUPERVISOR
Who assists the Department Head in managing maintenance at the division level? -
CORRECT ANSWER-DIVISION OFFICER
Who has the responsibility to maintain the list of effective pages? - CORRECT
ANSWER-WORK CENTER SUPERVISOR
Which schedule is NOT used in the 3M system? - CORRECT ANSWER-DAILY
Which of the following periodicity code is used when a maintenance requirement is
performed monthly? - CORRECT ANSWER-M
Which document is use to verify that you have the proper MRC? - CORRECT
ANSWER-MIP (MAINTENANCE INDEX PAGE)
and answers 100% verified
What ARE 3 considerations when dealing with electrical burns? - CORRECT ANSWER-
Electrical current may burn a large area just below the surface
Perform CPR if needed
Treatment is the same as for a thermal burn
(True/False) Section 300 of the PQS book list infrequent task and abnormal conditions.
- CORRECT ANSWER-TRUE
The overall purpose of PQS is to ...... - CORRECT ANSWER-provide a means to qualify
ships personnel.
(True/False) PQS provides an effective way to monitor an individual's qualification
progress. - CORRECT ANSWER-TRUE
When can your Final Qualification Page be signed?. - CORRECT ANSWER-After all
line items have been completed and signed
Vocabulary used in each qualification can be found in the ....... Section of the PQS
book. - CORRECT ANSWER-FUNDAMENTALS
Progress and completed qualifications of each person in the division are displayed on/in
the ....... - CORRECT ANSWER-PROGRESS CHART
Who is the final qualification authority? - CORRECT ANSWER-COMMANDING
OFFICER
A five inch outside micrometer will measure objects that are ....... inches thick. -
CORRECT ANSWER-4-5IN
A Dial indicator may be used to....... - CORRECT ANSWER-ALIGN MACHINERY
It is NOT safe to operate electrical power tools in areas where ....... is/are present. -
CORRECT ANSWER-FLAMMABLE GASES
Electrical power tools must be inspected prior to issue by a qualified ....... - CORRECT
ANSWER-ELECTRICIAN
A torque wrench is used to measure the tightness of ... - CORRECT ANSWER-
FASTENERS
, Torque wrenches are considered ....... equipment - CORRECT ANSWER-PRECISION
If a maintenance procedure does not specify a torque sequence, utilize the
recommended sequence found in ....... - CORRECT ANSWER-NTM CHAPER 075
Which document contains maintenance requirements pertaining to all equipment in a
command? - CORRECT ANSWER-PMS MASTER FILE
16. Which portion of the PMS Master File provides the work center supervisor a ready
reference of planned maintenance requirements.? - CORRECT ANSWER-WORK
CENTER PMS MANUAL
If a planned maintenance action cannot be completed in accordance with the steps
listed on the MRC, the maintenance man should ....... - CORRECT ANSWER-STOP
AND REPORT TO THE WCS
What is used to notify personnel that death or injury may result if the operating
procedures and practices are NOT correctly followed? - CORRECT ANSWER-Warnings
Which of the following serves as the "Table of Contents" for the Work Center PMS
manual? - CORRECT ANSWER-LIST OF EFFECTIVE PAGES (LOEP)
The SYSCOM Control Number assigned for each maintenance requirement listed in a
MIP must match the number on the corresponding - CORRECT ANSWER-MRC
(maintenance requirement card)
Materials needed to perform the required maintenance are found on the - CORRECT
ANSWER-FRONT OF THE MRC
The responsibility to replace a missing MRC belongs to the ....... - CORRECT
ANSWER-WORK CENTER SUPERVISOR
Who assists the Department Head in managing maintenance at the division level? -
CORRECT ANSWER-DIVISION OFFICER
Who has the responsibility to maintain the list of effective pages? - CORRECT
ANSWER-WORK CENTER SUPERVISOR
Which schedule is NOT used in the 3M system? - CORRECT ANSWER-DAILY
Which of the following periodicity code is used when a maintenance requirement is
performed monthly? - CORRECT ANSWER-M
Which document is use to verify that you have the proper MRC? - CORRECT
ANSWER-MIP (MAINTENANCE INDEX PAGE)
