EPIC AMB400 - Sample Test, KAW 2025-
2026 Question and Correct answer
GRADED A+
Your providers would like the question "Is the patient pregnant?" to appear when ordering an X-ray for
female patients aged 12 or older. After the order-specific question has been created, how will you
accomplish this request? (Choose only one answer.)
A. Link the question to the X-Ray Default Settings screen of System Definitions.
B. Link the question to the "X-ray orderables" procedure category.
C. Link the question to the OCC at the procedure category level.
D. Link the question to the imaging procedure record. - ANSWERSLink the question to the "X-ray
orderables" procedure category.
Which of the following can be specified in System Definitions or in an OCC linked to System Definitions?
(Choose all that apply.)
A. Display Items
B. Default Order Class
C. Default Priority
D. Default Status
E. Item buttons for Class
F. Order-specific question for pediatric patients - ANSWERSDisplay Items, Default Priority, and Item
buttons for Class
An ankle x-ray procedure is linked to the procedure category "X-ray orderables." All other procedures
linked to this category have three class buttons, while this procedure has four. All orders within the
category have the same allowed classes, so what is causing this difference? (Choose all that apply.)
,A. There are three class buttons defined in the procedure category.
B. This procedure has one defined class button.
C. There are three available classes set up in the procedure category.
D. There are four class buttons defined in the procedure record. - ANSWERSThere are three class
buttons defined in the procedure category and There are four class buttons defined in the procedure
record.
Referrals at your organization have appropriate display items appear within the order composer based
off of the value selected for Class (either "Internal Referral" or "Outgoing Referral"). To achieve this, a
minimum of three OCC records must be created and linked to the procedure category. What are the
contexts of the OCC records? (Choose only one answer.)
A. Referral-Ambulatory, Ambulatory, External Referral-Ambulatory
B. Referral-Ambulatory, Incoming Referral-Ambulatory, External-Referral-Ambulatory
C. Ambulatory, Ambulatory-Referral, External Referral-Ambulatory
D. Ambulatory, Internal Referral-Ambulatory, External Referral-Ambulatory - ANSWERSAmbulatory,
Internal Referral-Ambulatory, External Referral-Ambulatory
After ordering a varicella vaccination procedure, a clinician will open the Immunizations activity to
administer the immunization and a default dose of 0.5 mL appears. When a clinician is documenting a
patient-reported varicella vaccination using the same varicella immunization record, what will appear
for the dose? (Choose only one answer.)
A. Blank fields
B. 0.5 mL
C. The "mL" unit, but a missing numeric value
D. A stop sign, indicating the fields are required - ANSWERSBlank fields
Resources
Part I: When selecting the eye culture lab test from within the Conjunctivitis SmartSet, its Status is
Future. But, when clinicians in the ophthalmology department order the same test from their
department preference list, the Status is Normal. Why? (Choose only one answer.)
A. Within the Labs SmartGroup, the eye culture item is listing default values from a system preference
list.
B. SmartSets will display default values from a preference list of the user who has selected the order.
,C. Within the Labs SmartGroup, the eye culture item has an override value for status.
D. The Conjunctivitis SmartSet has overridden the default status for all labs it - ANSWERSWithin the Labs
SmartGroup, the eye culture item has an override value for status.
What BPA type would be needed to suggest an allergic rhinitis SmartSet for any office visit scheduled in
an allergy department? (Choose only one answer.)
A. Criteria
B. SmartSet Suggestion
C. SmartSet Base
D. This is not possible - ANSWERSSmartSet Suggestion
Clinicians have requested that the Pap smear SmartGroup only be available for female patients age 21
or older when the Adult Preventative Interventions SmartSet is opened. How could you satisfy this
request? (Choose only one answer.)
A. Create a BPA SmartSet Base record to restrict Labs section for female patients and suggest it for male
patients. Create a BPA Criteria record to suggest the SmartSet for patients age 21 or older.
B. Create a BPA Criteria record to evaluate patients age 21 or older, link it to a BPA SmartSet Base record
which includes patient gender of female, and link the SmartSet Base record to the Pap smear
SmartGroup.
C. Create a BPA SmartSet Suggestion record to evaluate patient age 21 or older, link it to a BPA Criteria
record which includes patient gender of female, and link the Criteria record to the SmartSet.
D. Create a BPA SmartSet Base record to evaluate patients age 21 or older, link it to - ANSWERSCreate a
BPA Criteria record to evaluate patients age 21 or older, link it to a BPA SmartSet Base record which
includes patient gender of female, and link the SmartSet Base record to the Pap smear SmartGroup.
Clinicians currently use a Hepatic Function order panel that contains several labs. They would like this
panel to be suggested when a reason for visit of jaundice, abdominal pain, or vomiting is entered. They
would also like to restrict the AST, ALT, or Albumin labs if the patient has already had these lab values
entered within the last 2 months. How can you efficiently accomplish this request? (Choose all answers
that apply.)
A. Create a section for the AST, ALT, and Albumin lab orders within the orderable SmartGroup.
B. Create a BPA criteria record that is evaluating the reasons for visit and link it to the orderable
SmartGroup.
, C. Create a BPA criteria record that is evaluating historical labs for AST, ALT, or Albumin recorded within
the last 2 months.
D. Create a BPA SmartSet base record and link it to the BPA criteria record evaluating the historical labs.
E. Link the BPA SmartSet base record to the section cont - ANSWERSThis request is not possible in an
orderable SmartGroup.
After assigning a therapy plan to a patient, a clinician can edit the following: (Choose all answers that
apply.)
A. The therapy plan's type
B. An order's interval
C. An order's display name
D. An order's duration - ANSWERSAn order's interval and An order's duration
When creating a therapy protocol, an administrator can edit the following: (Choose all answers that
apply.)
A. Review scheme
B. An order's frequency
C. The protocol type
D. Category names - ANSWERSReview scheme, An order's frequency, and The protocol type
True or False: An administrator adds a hematocrit lab to an existing preference list. When adding the
lab, the administrator intentionally leaves all of the items within the order composer blank. This ensures
that when a user orders the hematocrit lab from this preference list, the default values will be
overridden with blank fields. - ANSWERSFalse
True or False: Preference lists created in the Preference List Editor cannot override a record's details. -
ANSWERSTrue
When your providers choose "Yes" for Exacerbation (labeled B), they expect to see additional choices
cascade. Currently, nothing happens when they choose "Yes". What could be the issue? (Choose all that
apply.)
A. The Cascade method is set to "Prompt Users" on the Cascading Flowsheet form.
2026 Question and Correct answer
GRADED A+
Your providers would like the question "Is the patient pregnant?" to appear when ordering an X-ray for
female patients aged 12 or older. After the order-specific question has been created, how will you
accomplish this request? (Choose only one answer.)
A. Link the question to the X-Ray Default Settings screen of System Definitions.
B. Link the question to the "X-ray orderables" procedure category.
C. Link the question to the OCC at the procedure category level.
D. Link the question to the imaging procedure record. - ANSWERSLink the question to the "X-ray
orderables" procedure category.
Which of the following can be specified in System Definitions or in an OCC linked to System Definitions?
(Choose all that apply.)
A. Display Items
B. Default Order Class
C. Default Priority
D. Default Status
E. Item buttons for Class
F. Order-specific question for pediatric patients - ANSWERSDisplay Items, Default Priority, and Item
buttons for Class
An ankle x-ray procedure is linked to the procedure category "X-ray orderables." All other procedures
linked to this category have three class buttons, while this procedure has four. All orders within the
category have the same allowed classes, so what is causing this difference? (Choose all that apply.)
,A. There are three class buttons defined in the procedure category.
B. This procedure has one defined class button.
C. There are three available classes set up in the procedure category.
D. There are four class buttons defined in the procedure record. - ANSWERSThere are three class
buttons defined in the procedure category and There are four class buttons defined in the procedure
record.
Referrals at your organization have appropriate display items appear within the order composer based
off of the value selected for Class (either "Internal Referral" or "Outgoing Referral"). To achieve this, a
minimum of three OCC records must be created and linked to the procedure category. What are the
contexts of the OCC records? (Choose only one answer.)
A. Referral-Ambulatory, Ambulatory, External Referral-Ambulatory
B. Referral-Ambulatory, Incoming Referral-Ambulatory, External-Referral-Ambulatory
C. Ambulatory, Ambulatory-Referral, External Referral-Ambulatory
D. Ambulatory, Internal Referral-Ambulatory, External Referral-Ambulatory - ANSWERSAmbulatory,
Internal Referral-Ambulatory, External Referral-Ambulatory
After ordering a varicella vaccination procedure, a clinician will open the Immunizations activity to
administer the immunization and a default dose of 0.5 mL appears. When a clinician is documenting a
patient-reported varicella vaccination using the same varicella immunization record, what will appear
for the dose? (Choose only one answer.)
A. Blank fields
B. 0.5 mL
C. The "mL" unit, but a missing numeric value
D. A stop sign, indicating the fields are required - ANSWERSBlank fields
Resources
Part I: When selecting the eye culture lab test from within the Conjunctivitis SmartSet, its Status is
Future. But, when clinicians in the ophthalmology department order the same test from their
department preference list, the Status is Normal. Why? (Choose only one answer.)
A. Within the Labs SmartGroup, the eye culture item is listing default values from a system preference
list.
B. SmartSets will display default values from a preference list of the user who has selected the order.
,C. Within the Labs SmartGroup, the eye culture item has an override value for status.
D. The Conjunctivitis SmartSet has overridden the default status for all labs it - ANSWERSWithin the Labs
SmartGroup, the eye culture item has an override value for status.
What BPA type would be needed to suggest an allergic rhinitis SmartSet for any office visit scheduled in
an allergy department? (Choose only one answer.)
A. Criteria
B. SmartSet Suggestion
C. SmartSet Base
D. This is not possible - ANSWERSSmartSet Suggestion
Clinicians have requested that the Pap smear SmartGroup only be available for female patients age 21
or older when the Adult Preventative Interventions SmartSet is opened. How could you satisfy this
request? (Choose only one answer.)
A. Create a BPA SmartSet Base record to restrict Labs section for female patients and suggest it for male
patients. Create a BPA Criteria record to suggest the SmartSet for patients age 21 or older.
B. Create a BPA Criteria record to evaluate patients age 21 or older, link it to a BPA SmartSet Base record
which includes patient gender of female, and link the SmartSet Base record to the Pap smear
SmartGroup.
C. Create a BPA SmartSet Suggestion record to evaluate patient age 21 or older, link it to a BPA Criteria
record which includes patient gender of female, and link the Criteria record to the SmartSet.
D. Create a BPA SmartSet Base record to evaluate patients age 21 or older, link it to - ANSWERSCreate a
BPA Criteria record to evaluate patients age 21 or older, link it to a BPA SmartSet Base record which
includes patient gender of female, and link the SmartSet Base record to the Pap smear SmartGroup.
Clinicians currently use a Hepatic Function order panel that contains several labs. They would like this
panel to be suggested when a reason for visit of jaundice, abdominal pain, or vomiting is entered. They
would also like to restrict the AST, ALT, or Albumin labs if the patient has already had these lab values
entered within the last 2 months. How can you efficiently accomplish this request? (Choose all answers
that apply.)
A. Create a section for the AST, ALT, and Albumin lab orders within the orderable SmartGroup.
B. Create a BPA criteria record that is evaluating the reasons for visit and link it to the orderable
SmartGroup.
, C. Create a BPA criteria record that is evaluating historical labs for AST, ALT, or Albumin recorded within
the last 2 months.
D. Create a BPA SmartSet base record and link it to the BPA criteria record evaluating the historical labs.
E. Link the BPA SmartSet base record to the section cont - ANSWERSThis request is not possible in an
orderable SmartGroup.
After assigning a therapy plan to a patient, a clinician can edit the following: (Choose all answers that
apply.)
A. The therapy plan's type
B. An order's interval
C. An order's display name
D. An order's duration - ANSWERSAn order's interval and An order's duration
When creating a therapy protocol, an administrator can edit the following: (Choose all answers that
apply.)
A. Review scheme
B. An order's frequency
C. The protocol type
D. Category names - ANSWERSReview scheme, An order's frequency, and The protocol type
True or False: An administrator adds a hematocrit lab to an existing preference list. When adding the
lab, the administrator intentionally leaves all of the items within the order composer blank. This ensures
that when a user orders the hematocrit lab from this preference list, the default values will be
overridden with blank fields. - ANSWERSFalse
True or False: Preference lists created in the Preference List Editor cannot override a record's details. -
ANSWERSTrue
When your providers choose "Yes" for Exacerbation (labeled B), they expect to see additional choices
cascade. Currently, nothing happens when they choose "Yes". What could be the issue? (Choose all that
apply.)
A. The Cascade method is set to "Prompt Users" on the Cascading Flowsheet form.
