Hunter's ED Chapter Review Exercises
questions and answers 2024\2025 A+
Grade
A primary objective of hunter education program is to?
A. Give every hunter the same degree of skill and knowledge.
B. Ensure that everyone enjoys hunting and has an opportunity to hunt.
C. Produce knowledgeable, responsible, and involved hunter.
D. Non of the above.
- correct answer C. Produce knowledgeable, responsible, and involved hunter.
Name three hunting-related projects for which the Federal Aid in Wildlife Restoration Act provides
funding.
- correct answer I. Selection
II. Restoration
III. Improvement
Which of these is not a source of hunter education funding?
A. State highway departments
B. State wildlife agencies
C. International Hunter Education Association
D. U.S. Fish & Wildlife Service
- correct answer A. State highway departments
Name three behaviors of a responsible hunter.
- correct answer Attitude, Skills, and Knowledge
,The three basic parts of a modern firearm are______.
A. cartridge, stock, and barrel.
B. action, stock, and barrel.
C. Stock, trigger, and action
D. Barrel, Chamber, and muzzle.
- correct answer C. Stock, trigger, and action
Label the indicated parts of a bolt-action rifle:
- correct answer I. Butt
II. Sight
III. trigger
IV. Muzzle
the component in ammunition that ignites the gunpowder when struck by the the firing pin is the
___________.
- correct answer Primer
The action of a firearm is made up of parts that __________.
A. block the trigger or hammer to prevent accidental firing.
B. hold ammunition before it's loaded into the chamber.
C. load, unload, fire, and eject the cartridge or shot shell.
D. serve as the handle of the firearm.
- correct answer C. load, unload, fire, and eject the cartridge or shot shell.
You should use only ammunition that exactly matches the caliber or gauge specifications marked on the
___________ of your firearm.
- correct answer barrel
label the indication parts of the rifle and shotgun ammunition:
- correct answer I. Bullet
II. Shot
III. Gunpowder
, IV. Primer
List six types of firearm actions.
- correct answer I. Bolt Action
II. Lever Action
III. Pump Action
IV. Semi-Automatic
V. Break Action
IV. Revolting Action
A safety is located around the receiver of the firearm and ______.
A. ensures that the firearm can never be accidental fired.
B. is a device that blocks the action to prevent accidental firing.
C. is always located either inside or on the trigger guard.
D. all of the above.
- correct answer B. is a device that blocks the action to prevent accidental firing.
The most accurate sight for a firearm is the ___________.
- correct answer Telescopic
The design feature that causes a bullet to spiral, which increases accuracy and distance, is called
________________.
- correct answer Rifling
___________________ is a measure related to the diameter of the bore and the size of the shotshells
designed for that bore.
- correct answer Gauge
When referring to firearms, "caliber" is ____________.
A. the length of the barrel of the rifle or handgun.
B. always expressed in hundredths of an inch.
questions and answers 2024\2025 A+
Grade
A primary objective of hunter education program is to?
A. Give every hunter the same degree of skill and knowledge.
B. Ensure that everyone enjoys hunting and has an opportunity to hunt.
C. Produce knowledgeable, responsible, and involved hunter.
D. Non of the above.
- correct answer C. Produce knowledgeable, responsible, and involved hunter.
Name three hunting-related projects for which the Federal Aid in Wildlife Restoration Act provides
funding.
- correct answer I. Selection
II. Restoration
III. Improvement
Which of these is not a source of hunter education funding?
A. State highway departments
B. State wildlife agencies
C. International Hunter Education Association
D. U.S. Fish & Wildlife Service
- correct answer A. State highway departments
Name three behaviors of a responsible hunter.
- correct answer Attitude, Skills, and Knowledge
,The three basic parts of a modern firearm are______.
A. cartridge, stock, and barrel.
B. action, stock, and barrel.
C. Stock, trigger, and action
D. Barrel, Chamber, and muzzle.
- correct answer C. Stock, trigger, and action
Label the indicated parts of a bolt-action rifle:
- correct answer I. Butt
II. Sight
III. trigger
IV. Muzzle
the component in ammunition that ignites the gunpowder when struck by the the firing pin is the
___________.
- correct answer Primer
The action of a firearm is made up of parts that __________.
A. block the trigger or hammer to prevent accidental firing.
B. hold ammunition before it's loaded into the chamber.
C. load, unload, fire, and eject the cartridge or shot shell.
D. serve as the handle of the firearm.
- correct answer C. load, unload, fire, and eject the cartridge or shot shell.
You should use only ammunition that exactly matches the caliber or gauge specifications marked on the
___________ of your firearm.
- correct answer barrel
label the indication parts of the rifle and shotgun ammunition:
- correct answer I. Bullet
II. Shot
III. Gunpowder
, IV. Primer
List six types of firearm actions.
- correct answer I. Bolt Action
II. Lever Action
III. Pump Action
IV. Semi-Automatic
V. Break Action
IV. Revolting Action
A safety is located around the receiver of the firearm and ______.
A. ensures that the firearm can never be accidental fired.
B. is a device that blocks the action to prevent accidental firing.
C. is always located either inside or on the trigger guard.
D. all of the above.
- correct answer B. is a device that blocks the action to prevent accidental firing.
The most accurate sight for a firearm is the ___________.
- correct answer Telescopic
The design feature that causes a bullet to spiral, which increases accuracy and distance, is called
________________.
- correct answer Rifling
___________________ is a measure related to the diameter of the bore and the size of the shotshells
designed for that bore.
- correct answer Gauge
When referring to firearms, "caliber" is ____________.
A. the length of the barrel of the rifle or handgun.
B. always expressed in hundredths of an inch.
