NFPA 80 Questions and Answers | Latest Version | 2025/2026 | Correct & Verified

NFPA 80 Questions and Answers | Latest Version | 2025/2026 | Correct & Verified What is the main purpose of NFPA 80? To provide requirements for the installation and maintenance of fire doors and openings. How often must fire doors be inspected according to NFPA 80? At least once a year. What is the minimum fire-resistance rating required for a fire door assembly in an exit corridor? 20 minutes to 3 hours, depending on building occupancy and code. Who is responsible for ensuring fire doors are maintained in proper working order? The building owner or designated authority having jurisdiction. What is the primary purpose of a self-closing device on a fire door? To automatically close the door to prevent the spread of fire and smoke. 2 Can a fire door be propped open during normal operations? No, unless it is equipped with an approved hold-open device released by smoke detection. What type of materials are typically used in fire door construction? Steel, gypsum, or wood assemblies listed and labeled for fire protection. What is required after a fire door has been repaired? It must be tested to ensure it closes and latches properly. How should gaps around a fire door be maintained? Within manufacturer’s specifications to prevent passage of smoke and flames. What is the purpose of a labeled fire door? To indicate that the door assembly has been tested and listed for fire protection. What is the maximum allowable clearance between a fire door bottom and the floor? 3⁄4 inch or as specified by the manufacturer. 3 Why is regular lubrication important for fire doors? To ensure hinges and closing mechanisms function correctly. What is the purpose of an automatic closing device on a swinging fire door? To ensure the door closes fully after being opened. Can a fire door be modified without affecting its listing? No, any modifications must be approved and tested. How often should fire door hardware be checked for proper operation? At least annually, or more frequently if required by the authority having jurisdiction. What is the role of smoke seals in a fire door assembly? To prevent the passage of smoke between compartments. Can fire doors be blocked or wedged open? No, unless using an approved smoke detection release device. 4 What is the primary purpose of a fire window or vision panel in a fire door? To allow visibility while maintaining fire-resistance integrity. What is required when a fire door is damaged beyond repair? It must be replaced with a listed and labeled assembly. How should double fire doors be installed? With proper coordination of closing mechanisms so both doors close and latch fully. What type of inspection should be performed on fire doors? Visual and operational inspection to check hardware, gaps, and door movement. Why are panic hardware devices used on fire doors?