NASCLA EXAM QUESTIONS AND ANSWERS GRADED A+
100% VERIFIED.
1. Wood plates are being laid out so that the rough openings for the doors can
be located. Anchor bolts must be placed so that there is a bolt located within
how many inches from the end of each section plate? ANS >>> 12 inches
2. A contractor puts in a claim under a comprehensive standard general
liability policy. The policy has no additional coverage, riders, or floaters, and
has a $1,000 deductible per occurrence. The claim is for a job-site accident
that caused $5,000 of injuries to employees, $1,000 of injuries to a pedestrian,
$3,000 damage to the contractor's equipment, and $3,000 loss of project mate-
rials purchased by the contractor. The insurance company is liable for ANS
>>> $0.00
3. What is the minimum temperature to be maintained during gypsum board
finishing procedures? ANS >>> 50 degrees
4. For a concrete masonry wall to be solid, all units must have at least what
percentage of its net area as solid? ANS >>> 75%
5. Metal panels that are designed to act as stressed-skin panels are attached
directly to the structural frame of the building with ANS >>> clips
6. Which phase of the value engineering process involves creating design
concepts for the alternatives identified in the evaluation phase? ANS >>>
development phase
7. Which is a true statement regarding the maximum construction load that
mailto:https://www.stuvia.com/user/techgrades 1/ 1
100% VERIFIED.
1. Wood plates are being laid out so that the rough openings for the doors can
be located. Anchor bolts must be placed so that there is a bolt located within
how many inches from the end of each section plate? ANS >>> 12 inches
2. A contractor puts in a claim under a comprehensive standard general
liability policy. The policy has no additional coverage, riders, or floaters, and
has a $1,000 deductible per occurrence. The claim is for a job-site accident
that caused $5,000 of injuries to employees, $1,000 of injuries to a pedestrian,
$3,000 damage to the contractor's equipment, and $3,000 loss of project mate-
rials purchased by the contractor. The insurance company is liable for ANS
>>> $0.00
3. What is the minimum temperature to be maintained during gypsum board
finishing procedures? ANS >>> 50 degrees
4. For a concrete masonry wall to be solid, all units must have at least what
percentage of its net area as solid? ANS >>> 75%
5. Metal panels that are designed to act as stressed-skin panels are attached
directly to the structural frame of the building with ANS >>> clips
6. Which phase of the value engineering process involves creating design
concepts for the alternatives identified in the evaluation phase? ANS >>>
development phase
7. Which is a true statement regarding the maximum construction load that
mailto:https://www.stuvia.com/user/techgrades 1/ 1
