1
SHP final Exam Questions with correct and verified
answers. A+ GRADED. - CORRECT ANSWER
The firefighter may be installed next to a stand-alone battery smoke detector -
...(ANSWERS)....True
When performing a full system test, you may bypass any open doors or windows -
...(ANSWERS)....False
When programming an skey1,you must - ...(ANSWERS)....Always enable the
emergency
When running power to the take345,polarity doesn't apply - ...(ANSWERS)....False
When programming the emergency key for the skey1,which zone/sensor type is
used. - ...(ANSWERS)....Audible alarm (7)
When installing a smkt3,you must use the included screws and anchors -
...(ANSWERS)....True
When installing the firefighter, it is required to test the customers existing smoke
detectors - ...(ANSWERS)....True
When installing a Dw21, where is the approved location for the sensor -
...(ANSWERS)....Between 6"(15cm) and 2'(61cm) from floor
, 2
When installing a dw11 on a vinyl or metal frame, what should primarily use to
mount the sensor - ...(ANSWERS)....Provided double sided tape
Which of the following materials can you use to group multiple ground terminals
in a takeover. - ...(ANSWERS)....Beans & wire caps
Which of the following sensors are you not allowed to program using a translator
- ...(ANSWERS)....Smoke detector
When installing the take345, you must always test the new 12v battery before
using it. - ...(ANSWERS)....True
What is the output voltage of transformer used to power the sky control -
...(ANSWERS)....16.5
What is the minimum distance for placement of a co3 from the corners of the wall
- ...(ANSWERS)....12"
The smkt3 has 2 function:smoke and heat detection - ...(ANSWERS)....False
How would you program a co3 if mounted on a hallway wall -
...(ANSWERS)....Loop 1 Zone 14
SHP final Exam Questions with correct and verified
answers. A+ GRADED. - CORRECT ANSWER
The firefighter may be installed next to a stand-alone battery smoke detector -
...(ANSWERS)....True
When performing a full system test, you may bypass any open doors or windows -
...(ANSWERS)....False
When programming an skey1,you must - ...(ANSWERS)....Always enable the
emergency
When running power to the take345,polarity doesn't apply - ...(ANSWERS)....False
When programming the emergency key for the skey1,which zone/sensor type is
used. - ...(ANSWERS)....Audible alarm (7)
When installing a smkt3,you must use the included screws and anchors -
...(ANSWERS)....True
When installing the firefighter, it is required to test the customers existing smoke
detectors - ...(ANSWERS)....True
When installing a Dw21, where is the approved location for the sensor -
...(ANSWERS)....Between 6"(15cm) and 2'(61cm) from floor
, 2
When installing a dw11 on a vinyl or metal frame, what should primarily use to
mount the sensor - ...(ANSWERS)....Provided double sided tape
Which of the following materials can you use to group multiple ground terminals
in a takeover. - ...(ANSWERS)....Beans & wire caps
Which of the following sensors are you not allowed to program using a translator
- ...(ANSWERS)....Smoke detector
When installing the take345, you must always test the new 12v battery before
using it. - ...(ANSWERS)....True
What is the output voltage of transformer used to power the sky control -
...(ANSWERS)....16.5
What is the minimum distance for placement of a co3 from the corners of the wall
- ...(ANSWERS)....12"
The smkt3 has 2 function:smoke and heat detection - ...(ANSWERS)....False
How would you program a co3 if mounted on a hallway wall -
...(ANSWERS)....Loop 1 Zone 14
