CCNP ENCOR 350-401 NEWEST 2025 EXAM
QUESTIONS AND CORRECT ANSWERS | A+ GRADE
Which function does a fabric edge node perform in an SD-Access deployment?
A. Connects endpoints to the fabric and forwards their traffic.
B. Encapsulates end-user data traffic into LISP.
C. Connects the SD-Access fabric to another fabric or external Layer 3 networks.
D. Provides reachability between border nodes in the fabric underlay. - ans -A
Which statement about the OPSF debug output is true?
A. The output displays OSPF hello messages which router R1 has sent or received
on interface Fa0/1.
B. The output displays OSPF messages which router R1 has sent or received on all
interfaces.
C. The output displays OSPF messages which router R1 has sent or received on
interface Fa0/1.
D. The output displays OSPF hello and LSACK messages which router R1 has sent
or received - ans -A
Which LISP infrastructure device provides connectivity between non-LISP sites
and LISP sites by receiving non-LISP traffic with a LISP site destination?
A. PITR
B. map resolver
C. map server
D. PETR - ans -A
Which two protocols are used with YANG data models? (Choose two.)
A. TLS
B. RESTCONF
C. SSH
D. NETCONF
E. HTTPS - ans -BD
,Which HTTP status code is the correct response for a request with an incorrect
password applied to a REST API session?
A. HTTP Status Code: 200
B. HTTP Status Code: 302
C. HTTP Status Code: 401
D. HTTP Status Code: 504 - ans -C
The login method is configured on the VTY lines of a router with these
parameters. • The first method for authentication is TACACS • If TACACS is
unavailable, login is allowed without any provided credentials Which
configuration accomplishes this task? - ans -D
Which statement about multicast RPs is true?
A. RPs are required only when using protocol independent multicast dense mode.
B. RPs are required for protocol independent multicast sparse mode and dense
mode.
C. By default, the RP is needed periodically to maintain sessions with sources and
receivers.
D. By default, the RP is needed only to start new sessions with sources and
receivers. - ans -D
To increase total throughput and redundancy on the links between the wireless
controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to
connect?
A. Active
B. Passive
C. On
D. Auto - ans -C
Which feature does Cisco TrustSec use to provide scalable, secure communication
throughout a network?
A. security group tag ACL assigned to each port on a switch
B. security group tag number assigned to each user on a switch C. security group
tag number assigned to each port on a network
, D. security group tag ACL assigned to each router on a network - ans -C
Which privilege level is assigned to VTY users?
A. 1
B. 7
C. 13
D. 15 - ans -A
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content.
B. The RIB maintains a minor image of the FIB.
C. The RIB is used to make IP source prefix-based switching decisions.
D. The FIB is where all IP routing information is stored - ans -A
Which requirement for an Ansiblemanaged node is true?
A. It must have an SSH server running.
B. It must be a Linux server or a Cisco device.
C. It must support ad hoc commands.
D. It must have an Ansible Tower installed - ans -B
A client device fails to see the enterprise SSID, but other client devices are
connected to it. What is the cause of this issue?
A. The client has incorrect credentials stored for the configured broadcast SSID.
B. The hidden SSID was not manually configured on the client. C. The broadcast
SSID was not manually configured on the client.
D. The client has incorrect credentials stored for the configured hidden SSID - ans
-B
Which two descriptions of FlexConnect mode for Cisco APs are true? (Choose
two.)
A. APs that operate in FlexConnect mode cannot detect rogue APs.
QUESTIONS AND CORRECT ANSWERS | A+ GRADE
Which function does a fabric edge node perform in an SD-Access deployment?
A. Connects endpoints to the fabric and forwards their traffic.
B. Encapsulates end-user data traffic into LISP.
C. Connects the SD-Access fabric to another fabric or external Layer 3 networks.
D. Provides reachability between border nodes in the fabric underlay. - ans -A
Which statement about the OPSF debug output is true?
A. The output displays OSPF hello messages which router R1 has sent or received
on interface Fa0/1.
B. The output displays OSPF messages which router R1 has sent or received on all
interfaces.
C. The output displays OSPF messages which router R1 has sent or received on
interface Fa0/1.
D. The output displays OSPF hello and LSACK messages which router R1 has sent
or received - ans -A
Which LISP infrastructure device provides connectivity between non-LISP sites
and LISP sites by receiving non-LISP traffic with a LISP site destination?
A. PITR
B. map resolver
C. map server
D. PETR - ans -A
Which two protocols are used with YANG data models? (Choose two.)
A. TLS
B. RESTCONF
C. SSH
D. NETCONF
E. HTTPS - ans -BD
,Which HTTP status code is the correct response for a request with an incorrect
password applied to a REST API session?
A. HTTP Status Code: 200
B. HTTP Status Code: 302
C. HTTP Status Code: 401
D. HTTP Status Code: 504 - ans -C
The login method is configured on the VTY lines of a router with these
parameters. • The first method for authentication is TACACS • If TACACS is
unavailable, login is allowed without any provided credentials Which
configuration accomplishes this task? - ans -D
Which statement about multicast RPs is true?
A. RPs are required only when using protocol independent multicast dense mode.
B. RPs are required for protocol independent multicast sparse mode and dense
mode.
C. By default, the RP is needed periodically to maintain sessions with sources and
receivers.
D. By default, the RP is needed only to start new sessions with sources and
receivers. - ans -D
To increase total throughput and redundancy on the links between the wireless
controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to
connect?
A. Active
B. Passive
C. On
D. Auto - ans -C
Which feature does Cisco TrustSec use to provide scalable, secure communication
throughout a network?
A. security group tag ACL assigned to each port on a switch
B. security group tag number assigned to each user on a switch C. security group
tag number assigned to each port on a network
, D. security group tag ACL assigned to each router on a network - ans -C
Which privilege level is assigned to VTY users?
A. 1
B. 7
C. 13
D. 15 - ans -A
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content.
B. The RIB maintains a minor image of the FIB.
C. The RIB is used to make IP source prefix-based switching decisions.
D. The FIB is where all IP routing information is stored - ans -A
Which requirement for an Ansiblemanaged node is true?
A. It must have an SSH server running.
B. It must be a Linux server or a Cisco device.
C. It must support ad hoc commands.
D. It must have an Ansible Tower installed - ans -B
A client device fails to see the enterprise SSID, but other client devices are
connected to it. What is the cause of this issue?
A. The client has incorrect credentials stored for the configured broadcast SSID.
B. The hidden SSID was not manually configured on the client. C. The broadcast
SSID was not manually configured on the client.
D. The client has incorrect credentials stored for the configured hidden SSID - ans
-B
Which two descriptions of FlexConnect mode for Cisco APs are true? (Choose
two.)
A. APs that operate in FlexConnect mode cannot detect rogue APs.
