NCCCO TELESCOPIC BOOM CRANE- SWING CAB(TLL) EXAM |GUARANTEED ACCURATE ANSWERS

A crane is operating with a long boom, on outriggers, on uneven ground. Under these conditions it is important to - ACCURATE ANSWERS Block under the float or pad to achieve a 90 degree angle between the cylinder rod and the float or pad What is the purpose of a boom length indicator? - ACCURATE ANSWERS Indicates the extended length of boom According to OSHA 1926 subpart cc, floats/pads must be fastened to the outrigger/stabilizers when - ACCURATE ANSWERS They are in use A crane's jib is offset 15 degrees versus it's original 0 degree offset and the boom angle remains unchanged, the load radius will - ACCURATE ANSWERS Increase When leaving telescopic boom cranes unattended overnight or for longer periods, the boom should be - ACCURATE ANSWERS Fully retracted and stowed On a telescopic boom truck crane that has all 5 outriggers properly positioned, the working area diagram will indicate the "over front" area is - ACCURATE ANSWERS Determined by the crane manufacturer According to OSHA 1926 subpart cc, who determines if a crane can be used for pick and carry operations? - ACCURATE ANSWERS The manufacturer According to OSHA 1926 subpart cc, what function does the holding valve on a vertical outrigger jack perform? - ACCURATE ANSWERS Hold pressure in the vertical ram if a hydraulic connection fails Wh