MSA G1 SCBA USAF TRAINING 2025 QUESTIONS
WITH 100% VERIFIED SOLUTIONS, SCORED A+
/ During inspection, check that the SCBA bell is - Answer-A. Properly aligned
B. Screwed in securely; the bell should not rotate
C. Both A & B
/.What is the frequency of the cylinder hydrostatic testing? - Answer-A. 3 years for
fiberglass composite, 5 years for carbon-wrapped & aluminum
B. 5 years for fiberglass composite; 3 years for carbon-wrapped & aluminum
C. 5 year for all cylinder types
/.To unlock the battery module - Answer-A. Use a 1/4 Philips Head screwdriver
B. Use the battery removal tool
C. Use a tire iron
/.If an SCBA component fails functional testing - Answer-A. It is still usable if the SCBA
passes visual inspection
B. Remove the entire SCBA from service and enlist a certified repair tech
C. Replace the component and retest the SCBA
/.The integrated PASS device lets users monitor movement, as well as - Answer-A.
Monitor buddy light status
B. Monitor cylinder pressure and battery status
C. Monitor speaker volume
/.Functional testing should always be performed - Answer-A. Using a full cylinder
B. Using a cylinder that is at least 90% pressurized
C. Using a fully depressurized cylinder
/.When bleeding off air pressure - Answer-A. No alarm will sound until air pressure
reaches 200 psi
B. Alarms should sounds until air pressure drops to 200 psi or less
C. Alarms should sounds until cylinder is fully depressurized
/.When donning the SCBA - Answer-A. Be sure that the red bypass knob is fully closed
B. Fully open the cylinder valve
C. Both A & B
/.If cylinder gauge, control module and HUD pressure readings are not within 5% of full
cylinder pressure - Answer-A. Do not use the SCBA
B/ Continue to calibrate until 5% is reached
C. 2.5% will suffice for short periods of time
WITH 100% VERIFIED SOLUTIONS, SCORED A+
/ During inspection, check that the SCBA bell is - Answer-A. Properly aligned
B. Screwed in securely; the bell should not rotate
C. Both A & B
/.What is the frequency of the cylinder hydrostatic testing? - Answer-A. 3 years for
fiberglass composite, 5 years for carbon-wrapped & aluminum
B. 5 years for fiberglass composite; 3 years for carbon-wrapped & aluminum
C. 5 year for all cylinder types
/.To unlock the battery module - Answer-A. Use a 1/4 Philips Head screwdriver
B. Use the battery removal tool
C. Use a tire iron
/.If an SCBA component fails functional testing - Answer-A. It is still usable if the SCBA
passes visual inspection
B. Remove the entire SCBA from service and enlist a certified repair tech
C. Replace the component and retest the SCBA
/.The integrated PASS device lets users monitor movement, as well as - Answer-A.
Monitor buddy light status
B. Monitor cylinder pressure and battery status
C. Monitor speaker volume
/.Functional testing should always be performed - Answer-A. Using a full cylinder
B. Using a cylinder that is at least 90% pressurized
C. Using a fully depressurized cylinder
/.When bleeding off air pressure - Answer-A. No alarm will sound until air pressure
reaches 200 psi
B. Alarms should sounds until air pressure drops to 200 psi or less
C. Alarms should sounds until cylinder is fully depressurized
/.When donning the SCBA - Answer-A. Be sure that the red bypass knob is fully closed
B. Fully open the cylinder valve
C. Both A & B
/.If cylinder gauge, control module and HUD pressure readings are not within 5% of full
cylinder pressure - Answer-A. Do not use the SCBA
B/ Continue to calibrate until 5% is reached
C. 2.5% will suffice for short periods of time
