AWS-CWI Part B Test 2 Questions and
Answers 100% Solved
what is the abbreviation for inadequate penetration due to high low? IPD
the deletion of backing used in a welder's qualification test will require requalification of
the welder
use of the term "should" shall have the following significance specification Provisions
that use should are non-mandatory practices that are considered beneficial
what is the abbreviation for undercut adjacent to the root pass? IU this is also known as
internal undercut
what portion of the bend test specimens surface is included in the convex surface the
beginning of the edge of the specimen and including the specimens Edge radius
specification Provisions that use shall are mandatory true
, true or false it is not necessary to document the minimum preheat on a WPS for fcaw gmaw gtaw
and smaw false
True or false: the addition or deletion of torch shielding gas is a qualification variable for fracture
toughness applications for smaw false
Which pipeline repair type does not require the use of a qualified welding procedure?
grinding repairs
True or false: cracks shall be considered a pica in pipeline work true
When a procedure qualification is performed using a cjp Groove weld what is also qualified?
wWeld buildups
Fillet Welds.
Partial penetration Groove welds.
What should be done to the surface of the exterior weld if a non-destructive examination is going
to be performed? remove the weld spatter
Answers 100% Solved
what is the abbreviation for inadequate penetration due to high low? IPD
the deletion of backing used in a welder's qualification test will require requalification of
the welder
use of the term "should" shall have the following significance specification Provisions
that use should are non-mandatory practices that are considered beneficial
what is the abbreviation for undercut adjacent to the root pass? IU this is also known as
internal undercut
what portion of the bend test specimens surface is included in the convex surface the
beginning of the edge of the specimen and including the specimens Edge radius
specification Provisions that use shall are mandatory true
, true or false it is not necessary to document the minimum preheat on a WPS for fcaw gmaw gtaw
and smaw false
True or false: the addition or deletion of torch shielding gas is a qualification variable for fracture
toughness applications for smaw false
Which pipeline repair type does not require the use of a qualified welding procedure?
grinding repairs
True or false: cracks shall be considered a pica in pipeline work true
When a procedure qualification is performed using a cjp Groove weld what is also qualified?
wWeld buildups
Fillet Welds.
Partial penetration Groove welds.
What should be done to the surface of the exterior weld if a non-destructive examination is going
to be performed? remove the weld spatter
