OSHA 10 Lesson Assessment 8 Questions and Answers | Latest Update | Graded A+

OSHA 10 Lesson Assessment 8 Questions and Answers | Latest Update | Graded A+ What should workers do before using a new piece of equipment? Read the manual, inspect for damage, and get proper training. Why is it important to wear high-visibility clothing in a work zone? To ensure workers are easily seen and avoid accidents. What should be done if a spill occurs in a work area? Contain the spill, clean it up properly, and report it. Why must hard hats be worn on construction sites? To protect against falling objects and head injuries. What is the safest way to handle a box cutter or utility knife? Cut away from your body and retract the blade when not in use. 2 Why should workers avoid standing under suspended loads? The load could fall and cause serious injuries. What should be done if an emergency exit is blocked? Clear the obstruction and report it immediately. Why must fire extinguishers be easily accessible? So they can be quickly used in case of fire. What should workers do if they feel dizzy while working at heights? Stop working, move to a safe area, and report the issue. Why should cords and hoses be kept out of walkways? To prevent trips and falls. What is the best way to prevent dehydration on the job? Drink plenty of water throughout the day. 3 Why should workers always maintain three points of contact when using a ladder? To ensure balance and prevent falls. What should be done before starting a job near a roadway? Set up warning signs and barriers for safety. Why must safety glasses be worn when working with power tools? To protect eyes from flying debris. What should workers do if they notice a coworker