Iron Worker Final Exam Questions and
Answers | Latest Version | 2024/2025 |
Correct & Verified
What is the purpose of shims in steel erection?
✔✔ To level and align steel components during installation.
Why is it important to use certified rigging equipment?
✔✔ To ensure the equipment can safely handle the intended loads.
What is a drift pin used for in ironworking?
✔✔ To align bolt holes in steel components during assembly.
Why is it essential to ground welding equipment properly?
✔✔ To prevent electrical shocks and ensure a safe working environment.
What should be done if a steel member is found to be out of alignment?
✔✔ Adjust it immediately using the appropriate tools and methods.
1
,Why must ironworkers use caution when handling sharp steel edges?
✔✔ To avoid cuts and injuries.
What does the term "dead load" refer to in construction?
✔✔ The permanent weight of a structure, including all its fixed components.
Why is it critical to verify bolt grades before installation?
✔✔ To ensure the bolts meet the strength requirements for the connection.
What is the function of turnbuckles in ironworking?
✔✔ To adjust the tension in guy wires or braces.
Why is a fire watch required during cutting or welding operations?
✔✔ To monitor for and extinguish any sparks or fires.
What is the role of anchor bolts in steel construction?
✔✔ To secure structural components to the foundation.
2
, Why must steel components be stored off the ground?
✔✔ To prevent corrosion and damage from moisture.
What is the purpose of a safety net in steel erection?
✔✔ To catch falling workers or materials and reduce injuries.
Why should ironworkers avoid standing under suspended loads?
✔✔ To prevent injury in case the load shifts or falls.
What is a beam tongs tool used for?
✔✔ To lift and move steel beams during assembly.
Why is proper lighting important in ironworking tasks?
✔✔ To ensure workers can see hazards and perform their tasks safely.
What is the primary function of a rebar tie wire?
✔✔ To securely fasten rebar intersections during concrete reinforcement.
3
Answers | Latest Version | 2024/2025 |
Correct & Verified
What is the purpose of shims in steel erection?
✔✔ To level and align steel components during installation.
Why is it important to use certified rigging equipment?
✔✔ To ensure the equipment can safely handle the intended loads.
What is a drift pin used for in ironworking?
✔✔ To align bolt holes in steel components during assembly.
Why is it essential to ground welding equipment properly?
✔✔ To prevent electrical shocks and ensure a safe working environment.
What should be done if a steel member is found to be out of alignment?
✔✔ Adjust it immediately using the appropriate tools and methods.
1
,Why must ironworkers use caution when handling sharp steel edges?
✔✔ To avoid cuts and injuries.
What does the term "dead load" refer to in construction?
✔✔ The permanent weight of a structure, including all its fixed components.
Why is it critical to verify bolt grades before installation?
✔✔ To ensure the bolts meet the strength requirements for the connection.
What is the function of turnbuckles in ironworking?
✔✔ To adjust the tension in guy wires or braces.
Why is a fire watch required during cutting or welding operations?
✔✔ To monitor for and extinguish any sparks or fires.
What is the role of anchor bolts in steel construction?
✔✔ To secure structural components to the foundation.
2
, Why must steel components be stored off the ground?
✔✔ To prevent corrosion and damage from moisture.
What is the purpose of a safety net in steel erection?
✔✔ To catch falling workers or materials and reduce injuries.
Why should ironworkers avoid standing under suspended loads?
✔✔ To prevent injury in case the load shifts or falls.
What is a beam tongs tool used for?
✔✔ To lift and move steel beams during assembly.
Why is proper lighting important in ironworking tasks?
✔✔ To ensure workers can see hazards and perform their tasks safely.
What is the primary function of a rebar tie wire?
✔✔ To securely fasten rebar intersections during concrete reinforcement.
3
