Carpentry: Test 2 Questions and Answers | Latest Version | 2024/2025 | Correct & Verified

Carpentry: Test 2 Questions and Answers | Latest Version | 2024/2025 | Correct & Verified What is the primary purpose of a miter saw? To make precise angled cuts. What does the term "plumb" refer to in carpentry? Being perfectly vertical. What is the meaning of "square" in carpentry? A 90-degree angle or alignment. What is a "joist" used for in construction? To support floors or ceilings. What does the term "flush" mean in carpentry? Two surfaces are even with each other. 2 What is a "bevel cut"? A cut made at an angle other than 90 degrees. What is the purpose of a "spirit level"? To check if a surface is level or plumb. What does "rip cut" mean? A cut made along the grain of the wood. What is a "stud" in construction? A vertical framing member in walls. What is the function of a "chalk line"? To mark straight lines on surfaces. What does "kerf" refer to in carpentry? The width of the cut made by a saw blade. 3 What is a "rafter" in roof construction? A sloped structural member supporting the roof. What is "planing" in carpentry? Smoothing or leveling wood surfaces with a plane. What is "crown molding"? Decorative trim installed at the junction of walls and ceilings. What does "grain" refer to in wood? The direction of the wood fibers. What is "mortise and tenon"? A type of joint where one piece fits into a hole in another. What is the purpose of a "jigsaw"?