Carpentry: Module 2 Questions and
Answers | Latest Version | 2024/2025 |
Correct & Verified
How do you prevent the wood from splintering when making a crosscut?
✔✔ Use painter's tape over the cut line to stabilize the wood fibers.
What is the benefit of using a clamp when working with wood?
✔✔ A clamp holds pieces in place securely while you work, ensuring precision in your cuts or
joints.
What tool would you use to trim a door to fit its frame?
✔✔ A hand planer or circular saw can be used to trim the edges.
Why is it important to check the moisture content of wood before starting a project?
✔✔ High moisture content can cause the wood to warp or shrink after the project is completed.
What should you do if a nail bends while driving it into wood?
✔✔ Pull it out, straighten it, and hammer it in again carefully to avoid splitting the wood.
1
,What is the main purpose of a chisel in woodworking?
✔✔ A chisel is used to carve, shape, and cut wood with precision.
How do you make a clean, precise cut with a saw?
✔✔ Use a fine-toothed saw and maintain a steady hand to follow the line carefully.
What is a biscuit joint used for in woodworking?
✔✔ A biscuit joint is used to align and join two pieces of wood by inserting an oval-shaped
piece of wood, called a biscuit, into matching slots.
What tool is best for creating smooth, rounded edges on a wooden tabletop?
✔✔ A router is ideal for smoothing and rounding edges with precision.
What should you do before drilling a hole into a piece of wood?
✔✔ Mark the spot clearly and ensure the drill bit is appropriate for the wood type and hole size.
Why is it recommended to use a dust collection system while sanding wood?
2
, ✔✔ It helps prevent the inhalation of harmful dust particles and keeps your workspace clean.
What should you do if your saw blade starts to bind in the wood?
✔✔ Stop cutting immediately, check the alignment of the blade, and adjust it if necessary.
What is the purpose of a miter box in carpentry?
✔✔ A miter box helps guide the saw to make accurate angled cuts, typically for molding or trim.
What is the most effective way to remove old finish from wood?
✔✔ Use a chemical stripper or sandpaper to carefully remove the old finish without damaging
the wood.
How do you prevent splitting when nailing into the end grain of wood?
✔✔ Pre-drill a hole before inserting the nail to avoid splitting.
Why should you always store lumber flat, not standing on its edge?
✔✔ Storing lumber flat helps prevent warping or twisting as it dries.
3
Answers | Latest Version | 2024/2025 |
Correct & Verified
How do you prevent the wood from splintering when making a crosscut?
✔✔ Use painter's tape over the cut line to stabilize the wood fibers.
What is the benefit of using a clamp when working with wood?
✔✔ A clamp holds pieces in place securely while you work, ensuring precision in your cuts or
joints.
What tool would you use to trim a door to fit its frame?
✔✔ A hand planer or circular saw can be used to trim the edges.
Why is it important to check the moisture content of wood before starting a project?
✔✔ High moisture content can cause the wood to warp or shrink after the project is completed.
What should you do if a nail bends while driving it into wood?
✔✔ Pull it out, straighten it, and hammer it in again carefully to avoid splitting the wood.
1
,What is the main purpose of a chisel in woodworking?
✔✔ A chisel is used to carve, shape, and cut wood with precision.
How do you make a clean, precise cut with a saw?
✔✔ Use a fine-toothed saw and maintain a steady hand to follow the line carefully.
What is a biscuit joint used for in woodworking?
✔✔ A biscuit joint is used to align and join two pieces of wood by inserting an oval-shaped
piece of wood, called a biscuit, into matching slots.
What tool is best for creating smooth, rounded edges on a wooden tabletop?
✔✔ A router is ideal for smoothing and rounding edges with precision.
What should you do before drilling a hole into a piece of wood?
✔✔ Mark the spot clearly and ensure the drill bit is appropriate for the wood type and hole size.
Why is it recommended to use a dust collection system while sanding wood?
2
, ✔✔ It helps prevent the inhalation of harmful dust particles and keeps your workspace clean.
What should you do if your saw blade starts to bind in the wood?
✔✔ Stop cutting immediately, check the alignment of the blade, and adjust it if necessary.
What is the purpose of a miter box in carpentry?
✔✔ A miter box helps guide the saw to make accurate angled cuts, typically for molding or trim.
What is the most effective way to remove old finish from wood?
✔✔ Use a chemical stripper or sandpaper to carefully remove the old finish without damaging
the wood.
How do you prevent splitting when nailing into the end grain of wood?
✔✔ Pre-drill a hole before inserting the nail to avoid splitting.
Why should you always store lumber flat, not standing on its edge?
✔✔ Storing lumber flat helps prevent warping or twisting as it dries.
3
