Core Curriculum: Introductory Craft
Skills/ Module 1 Exam Q&A 100% Solved
The formal procedure for taking=ng equipment out of service and ensuring
it cannot be operated until an authorized person has returned it to service is
? - ✔✔lockout/tagout
An _ is any man-made cut, cavity, trench or depression in any earth
surface, formed by removing earth. - ✔✔Excavation
A _ identified unsanitary, hazardous, or dangerous working conditions and
has the authority to correct or eliminate them. - ✔✔Qualified Person
A _ is large enough to work in but has limited means or entry or exit. -
✔✔Confined Space
Liquids that are _ must be stored in safety cans to avoid the risk of fire. -
✔✔Combustable
To save lives, prevent injuries, and to protect the health of American
workers, _ publishes rules and regulations that employees and employers
must follow. - ✔✔OSHA (Occupational Safety and Health Administration)
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, Even a brief exposure to the ultraviolet light from arc welding can damage
eyes causing a _. - ✔✔Flashburn
_ is OSHA's regulation requiring employers to inform employees about
possible hazards related to chemicals they use on the job - ✔✔HazComm
The temperature at which a fuel gives off enough gases to burn is called
the _. - ✔✔Flash point
A _ is the conducting connection between electrical equipment or an
electrical circuit and the earth. - ✔✔Ground
When climbing a ladder or a scaffold, a tagline or _ should be used to pull
up tools. - ✔✔Handline
If a work area is -----, that means it has pieces of material at least 2 inches
thick and 6 inches wide used as flooring, decking, or scaffolding. -
✔✔Planked
If doing work 6 or more feet above the ground, a _ must be worn with a
safety harness and attached to a strong anchor point. - ✔✔Lanyard
A structure that prevents trench walls from collapsing is known as ____ -
✔✔Shoring
Information on how to handle hazardous substances is located on the _. -
✔✔Safety Data Sheet (SDS)
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
Skills/ Module 1 Exam Q&A 100% Solved
The formal procedure for taking=ng equipment out of service and ensuring
it cannot be operated until an authorized person has returned it to service is
? - ✔✔lockout/tagout
An _ is any man-made cut, cavity, trench or depression in any earth
surface, formed by removing earth. - ✔✔Excavation
A _ identified unsanitary, hazardous, or dangerous working conditions and
has the authority to correct or eliminate them. - ✔✔Qualified Person
A _ is large enough to work in but has limited means or entry or exit. -
✔✔Confined Space
Liquids that are _ must be stored in safety cans to avoid the risk of fire. -
✔✔Combustable
To save lives, prevent injuries, and to protect the health of American
workers, _ publishes rules and regulations that employees and employers
must follow. - ✔✔OSHA (Occupational Safety and Health Administration)
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, Even a brief exposure to the ultraviolet light from arc welding can damage
eyes causing a _. - ✔✔Flashburn
_ is OSHA's regulation requiring employers to inform employees about
possible hazards related to chemicals they use on the job - ✔✔HazComm
The temperature at which a fuel gives off enough gases to burn is called
the _. - ✔✔Flash point
A _ is the conducting connection between electrical equipment or an
electrical circuit and the earth. - ✔✔Ground
When climbing a ladder or a scaffold, a tagline or _ should be used to pull
up tools. - ✔✔Handline
If a work area is -----, that means it has pieces of material at least 2 inches
thick and 6 inches wide used as flooring, decking, or scaffolding. -
✔✔Planked
If doing work 6 or more feet above the ground, a _ must be worn with a
safety harness and attached to a strong anchor point. - ✔✔Lanyard
A structure that prevents trench walls from collapsing is known as ____ -
✔✔Shoring
Information on how to handle hazardous substances is located on the _. -
✔✔Safety Data Sheet (SDS)
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
