Mold - Answers Which of the following contaminants doesn't have a code of federal regulations (CFR)
section dedicated to it?
11 microns - Answers Respirator bowl particles are those less than.
According to the AC AC code of conduct, when should you release confidential information? - Answers
Only when receiving a subpoena
Which agent will not be removed by a particulate Filter? - Answers mVPCs
Which of the following is a key limitation to biocides? - Answers They kill some microorganisms and
therefore provide safe haven for others
You know a contaminant is under negative pressure win - Answers Pressure inside is less than outside
What material should be dried within what time frame to prevent mold growth? - Answers Within 24 to
48 hours
According to bioaerosols, upon completion of remediation, the levels of mold spores in the remediated
area should be - Answers Similar to adjacent areas and outdoors
According to IICRC S520, what is the minimum recommended air changes per hour inside containment?
- Answers 4 ach
What does PCR stand for? - Answers polymerase chain reaction
According to IICRC S520, what should a contractor do when he/she comes across lead? - Answers
Comply with all federal, state and local laws
Which DOL agency regulates workplace exposure? - Answers OSHA
According toIICRC S500? Water from a backed up washing machine would be classified - Answers
Category 2
According to Field Guide, what type of factors affect mold growth - Answers Biotic and abiotic
What is the Key difference between legionnaires disease and Pontiac fever? - Answers Legionnaires
disease is a pneumonia
Stachybotrys is a - Answers Slow growing tertiary colonizer
Agents that are incorporated into a material to suppress microbial growth are called - Answers
Antimicrobial
According to Bioaerosols, legionella is not common an outdoor air because - Answers It desiccated and is
Oxidades by outdoor air
, What does saprobic mean? - Answers Heterotrophic organisms that obtain their nutrients from
nonliving organic matter by absorbing soluble organic compounds
According to IICRC S520, The expertise of a mold inspector is - Answers Building science
Where are endotoxins formed? - Answers Sell wall of Graham negative bacteria
According to OSHA, what is the first line of defense for ensuring worker health and safety? - Answers
Engineering controls
Xerophilic mold like - Answers Low water activity
What is the most common source of indoor bacteria? - Answers People
According to Bioaerosols, what does BRS stand for? - Answers Building related symptoms
According to Bioaerosols, what agents have been known to cause hypersensitivity diseases - Answers
Mold and detergents
In a flood damaged area, exposure to contaminants could be through all but - Answers Submersion
Legionella is classified as a - Answers Graham negative bacteria
What does mVOC stand for? - Answers Microbial volatile organic compound
A very cold climate should have the vapor barrier - Answers Towards the interior
What is associated with molds musty odors? - Answers mVOCs
What is a smoke pencil used for? - Answers Visualizing the direction of airflow
According to IICRC S520, which of the following is the biggest health concern for remediation workers? -
Answers Ingestion of microbial growth
Laboratory analysis of spore traps - Answers Is quicker than cultured samples
According to Boaerosols, ID 50 causes an infection in 50% of - Answers Exposed susceptible hosts
According to IICRC S520, which of the following water sources is classified as category 3 - Answers Flood
waters from streams
The primary concern in the public relating to Stachybotrys is because of - Answers Mycotoxins
According to IICRC S520, what do you do with category 3 duct board - Answers Remove and replace
What group would be classified as immunocompromised - Answers Chemotherapy patients
A building and a hot and humid climate should be operated - Answers Under a positive pressure