Carpentry 2 Module 5 Questions and Answers | Latest Version | 2024/2025 | Correct & Verified

Carpentry 2 Module 5 Questions and Answers | Latest Version | 2024/2025 | Correct & Verified What is the function of a plumb bob? To determine vertical alignment by using gravity What is the purpose of a chalk line in carpentry? To mark straight lines over long distances What is the difference between a sawzall and a circular saw? A sawzall is used for rough cutting, while a circular saw is used for straight cuts What is the standard length for most framing lumber? 8 feet What type of wood is commonly used for outdoor framing? Pressure-treated lumber 2 What does the term "joist" refer to in carpentry? A horizontal support member in floor and ceiling framing What is a ledger board used for? To provide support for the ends of floor joists or deck boards What is the purpose of a toe-nail in carpentry? To fasten two pieces of wood at an angle using nails What is the purpose of a stud in wall framing? To support the walls and hold up the structure What type of fastener is typically used to join two pieces of wood in framing? Nails or screws What does "wood grain" refer to in carpentry? The pattern formed by the fibers in the wood 3 What is the main purpose of plywood in construction? To provide structural strength and support in flooring, walls, and roofing What is the difference between softwood and hardwood? Softwood comes from coniferous trees, while hardwood comes from deciduous trees What is the purpose of a power sander? To smooth and finish surfaces by removing material What is the purpose of a carpenter's square? To measure, mark, and cut right angles What does "dry fit" mean in carpentry? Assembling pieces of wood without fasteners to check the fit before final installation What is the use of a router in carpentry? To hollow out or shape wood 4 What is the function of a wood chisel? To carve or shape wood by removing small amounts of material