Carpentry - Module 4 Questions and Answers | Latest Version | 2024/2025 | Correct & Verified

Carpentry - Module 4 Questions and Answers | Latest Version | 2024/2025 | Correct & Verified How can you ensure a door frame is level and square? Use a level and a square to check both the vertical and horizontal measurements. What is the difference between a finish nail and a common nail? Finish nails are smaller and have smaller heads, designed for a clean finish, while common nails are larger and stronger for framing. How can you smooth rough edges on a piece of wood? Use sandpaper, a file, or a router to smooth the edges. What is the best way to store wood to prevent warping? Store wood flat, off the ground, and in a dry environment to prevent moisture absorption. What is the purpose of a router in carpentry? A router is used to hollow out or shape wood, create edges, and add decorative designs. 2 Why is it important to wear ear protection when using loud power tools? Ear protection prevents hearing damage from prolonged exposure to loud noise. What is a spade bit used for in carpentry? A spade bit is used for drilling larger holes in wood quickly. What is the purpose of a coping joint? A coping joint is used to fit two pieces of wood together, particularly for moldings or trim, by shaping one piece to fit the other. How do you ensure a smooth finish when painting wood? Sand the surface before painting, apply a primer if necessary, and use even coats of paint. What is the purpose of a wood filler in carpentry? Wood filler is used to fill gaps, cracks, or holes in wood surfaces before finishing. What is the primary function of a level in carpentry? 3 To ensure surfaces and edges are perfectly horizontal or vertical. Why is a square used in carpentry? It helps to measure and mark precise right angles. What is the purpose of a tape measure in carpentry? To accurately measure lengths and distances for cuts and assembly. What is the purpose of a coping saw? It is used for making curved cuts in wood and other materials. How do you ensure a straight cut when using a hand saw? Use a guide or measure carefully to keep the saw aligned and steady. What is a drill used for in carpentry? A drill is used to make holes in wood or other materials. What is the function of wood glue in carpentry? 4 It is used to bond two pieces of wood together securely. Why are clamps important when working with wood? Clamps hold pieces together while glue dries or during assembly to ensure proper alignment. How can you ensure a wood joint is strong? By using the right joint type (like dovetail or mortise and tenon) and reinforcing it with nails or screws if needed. What is the purpose of sandpaper in carpentry? Sandpaper is used to smooth surfaces and remove