NCCER Carpentry Module 3: Review
Questions | Latest Version | 2024/2025 |
100% Correct
Why should wood be measured twice before cutting?
✔✔ To avoid mistakes and ensure accurate cuts.
What is the best way to prevent wood from splintering when drilling?
✔✔ Use a sharp drill bit and support the wood with a backing piece.
How should a circular saw blade be positioned for a clean cut?
✔✔ The blade should align with the cut line and rotate away from the user.
Why is it important to sand wood before finishing?
✔✔ To create a smooth surface and ensure the finish adheres evenly.
What is a dado joint used for in woodworking?
✔✔ To create a strong connection by fitting one piece of wood into a slot cut in another.
1
, How do you properly use a carpenter’s level?
✔✔ Place it flat on the surface, and adjust until the bubble is centered in the vial.
What is the purpose of a framing hammer in carpentry?
✔✔ To drive large nails into wood and handle heavy-duty framing tasks.
Why is it important to use the correct type of saw for a specific task?
✔✔ To ensure clean cuts and prevent damage to the tool or material.
What is a plumb line used for in carpentry?
✔✔ To check if a surface or structure is perfectly vertical.
How do you ensure a joint fits properly when assembling wood pieces?
✔✔ Measure and cut accurately, and test fit before applying fasteners or glue.
What is the purpose of a miter saw?
✔✔ To make precise angled cuts, especially for trim and molding.
2
Questions | Latest Version | 2024/2025 |
100% Correct
Why should wood be measured twice before cutting?
✔✔ To avoid mistakes and ensure accurate cuts.
What is the best way to prevent wood from splintering when drilling?
✔✔ Use a sharp drill bit and support the wood with a backing piece.
How should a circular saw blade be positioned for a clean cut?
✔✔ The blade should align with the cut line and rotate away from the user.
Why is it important to sand wood before finishing?
✔✔ To create a smooth surface and ensure the finish adheres evenly.
What is a dado joint used for in woodworking?
✔✔ To create a strong connection by fitting one piece of wood into a slot cut in another.
1
, How do you properly use a carpenter’s level?
✔✔ Place it flat on the surface, and adjust until the bubble is centered in the vial.
What is the purpose of a framing hammer in carpentry?
✔✔ To drive large nails into wood and handle heavy-duty framing tasks.
Why is it important to use the correct type of saw for a specific task?
✔✔ To ensure clean cuts and prevent damage to the tool or material.
What is a plumb line used for in carpentry?
✔✔ To check if a surface or structure is perfectly vertical.
How do you ensure a joint fits properly when assembling wood pieces?
✔✔ Measure and cut accurately, and test fit before applying fasteners or glue.
What is the purpose of a miter saw?
✔✔ To make precise angled cuts, especially for trim and molding.
2
