NCCER Carpentry Module 2 | Latest Version | 2024/2025 | Correct & Verified

NCCER Carpentry Module 2 | Latest Version | 2024/2025 | Correct & Verified What should you use to ensure a square cut when working with wood? A carpenter’s square or framing square can be used to measure and mark right angles for square cuts. Why is it important to mark materials before cutting them? Marking materials helps ensure the correct measurements and reduces the chances of mistakes during cutting. What is the function of a saw in carpentry? A saw is used to cut wood and other materials according to specified measurements. What is the purpose of a level in carpentry? A level is used to ensure that surfaces are perfectly horizontal or vertical for accurate construction. How should you store hand tools when not in use? 2 Hand tools should be cleaned, properly stored in a dry place, and kept away from hazardous conditions to prevent damage. What is the function of a chalk line in carpentry? A chalk line is used to mark straight, long lines on surfaces to guide cuts or placements. What type of wood is commonly used for framing in carpentry? Softwood, such as pine, is commonly used for framing because it is strong, durable, and relatively inexpensive. What is the best way to protect wood surfaces during construction? Using drop cloths, painter’s tape, or protective coverings helps protect wood surfaces from damage or staining. What should you do before using a power tool in carpentry? Inspect the tool to ensure it is in good working condition, and make sure to wear the appropriate personal protective equipment (PPE). How can you ensure the safety of others on a construction site? 3 Keep work areas clean, clearly mark hazardous zones, and communicate effectively with other workers about potential dangers. Why is it important to use proper lifting techniques when handling materials? Using proper lifting techniques helps prevent injury by reducing the strain on your body and maintaining good posture. What is the role of nails and screws in carpentry? Nails and screws are used to fasten materials together securely, with screws providing a stronger hold than nails. How can you ensure a proper fit when installing trim? Measure accurately, use a miter saw for precise cuts, and check for proper alignment before securing the trim. Why is it important to wear safety glasses when cutting or sanding wood? Safety glasses protect your eyes from flying debris, sawdust, and other potential hazards. What is a coping saw used for in carpentry? 4 A coping saw is used for making intricate and curved cuts, especially in wood trim and molding. What is the purpose of a framing square in carpentry? A framing square is used to measure and mark